Information about Water Supply Network

A water supply network is a system of engineered hydrologic and hydraulic components, including:

1. the watershed or geographic area that collects the water, see water purification - sources of drinking water;
2. a raw (untreated) water reservoir (above or below ground) where the water gathers, such as a lake, a river, or groundwater from an underground aquifer;
3. a means for delivery from the source to a point of treatment, such as (underground) piping, uncovered ground level aqueducts and/or tunnels;
4. water purification, such as a water treatment plant;
5. transmission from treatment, through pipes to treated water storage, that may be either elevated or ground level; and
6. distribution through piping/watermains from storage to consumption (at houses, fire hydrants, industrial use points, etc).

The product, delivered to the point of consumption is fresh water or drinking water.

Water Treatment

Virtually all large systems must treat the water; a fact that is tightly regulated by global, state and federal agencies, such as the World Health Organization (WHO) or the United States Environmental Protection Agency (EPA). Water purification usually occurs close to the final delivery points to reduce pumping costs and the chances of the water becoming contaminated after treatment.

Traditional surface water treatment plants generally consists of three steps: clarification, filtration and disinfection. Clarification refers to the separation of particles (dirt, organic matter, etc.) from the water stream. Chemical addition (i.e. alum, ferric chloride) destabilizes the particle charges and prepares them for clarification either by settling or floating out of the water stream. Sand, anthracite or activated carbon filters refine the water stream, removing smaller particulate matter. While other methods of disinfection exist, the preferred method is via chlorine addition. Chlorine effectively kills bacteria and most viruses and maintains a residual to protect the water supply through the supply network.

Once treated, chlorine is added to the water and it is distributed by the local supply network. Today, water supply systems are typically constructed of plastic, ferrous, or concrete circular pipe. However, other "pipe" shapes and material may be used, such as square or rectangular concrete boxes, arched brick pipe, or wood. Near the end point, the network of pipes through which the water is delivered is often referred to as the water mains.

Shallow dams and reservoirs are susceptible to outbreaks of toxic algae, especially if the water is warmed by a hot sun. The bacteria grow from stormwater runoff carrying fertilizer into the river where it acts a nutrient for the algae. Such outbreaks render the water unfit for human consumption.

Distribution

The energy that the system needs to deliver the water is called pressure. That energy is transferred to the water, therefore becoming water pressure, in a number of ways: by a pump, by gravity feed from a water source (such as a reservoir or a water tower) at a higher elevation, or, in smaller systems, by compressed air. These systems are usually owned and maintained by local governments, such as cities, or other public entities, but are occasionally operated by a commercial enterprise (see water privatization). Water supply networks are part of the master planning of communities, counties, and municipalities. Their planning and design requires the expertise of city planners and civil engineers, who must consider many factors, such as location, current demand, future growth, leakage, pressure, pipe size, pressure loss, fire fighting flows, etc. Construction occurs using the expertise of builders, called contractors, with expertise in building hydraulic facilities. The advent of these systems, along with comparable sewage systems, was one of the great engineering advances that made urbanization possible. Improvement in the quality of the water has been one of the great advances in public health.

As water passes through the distribution system, the water quality can degrade by reactions chemical and biological processes. Corrosion of metal pipe materials in the distribution system can cause the release of metals into the water with undesirable aesthetic and health effects. Release of iron from unlined iron pipes can result in customer reports of "red water" at the tap . Release of copper from copper pipes can add a metallic taste to the water. Copper levels at the consumer's tap are regulated to protect consumer health. Release of lead can occur from the solder used to join copper pipe together or from brass fixtures.

Utilities will often adjust the chemistry of the water before distribution to minimize its corrosiveness. The simplest adjustment involves control of pH and alkalinity to produce a water that tends to passivate corrosion by depositing a layer of calcium carbonate. Corrosion inhibitors are often added to reduce release of metals into the water. Common corrosion inhibitors added to the water are phosphates and silicates.

Maintenance of a biologically safe drinking water is another goal in water distribution. Typically, a chlorine based disinfectant, such as sodium hypochlorite or monochloramine is added to the water as it leaves the treatment plant. Booster stations can be placed within the distribution system to ensure that all areas of the distribution system have adequate sustained levels of disinfection.

Topologies

Like electric power lines, roads, and microwave radio networks, water systems may have a loop or branch network topology, or a combination of both. The piping networks are circular or rectangular. If any one section of water distribution main fails or needs repair, that section can be isolated without disrupting all users on the network.

Most systems are divided into zones. Factors determining the extent or size of a zone can include hydraulics, telemetry systems, history, and population density. Sometimes systems are designed for a specific area then are modified to accommodate development. Terrain affects hydraulics and some forms of telemetry. While each zone may operate as a stand-alone system, there is usually some arrangement to interconnect zones in order to manage equipment failures or system failures.

Maintenance

Water supply networks usually represent the majority of assets of a water utility. Systematic documentation of maintenance works using a Computerized Maintenance Management System is a key to a successful operation of a water utility.

See also

• Aqueduct
• Domestic water system
• Goldfields Water Supply Scheme
• Hardy Cross
• Hosepipe ban
• Hydrology
• Plumbing
• Tap water
• Water supply in Hong Kong
• Water
• Water pipes
• Water Meters
• Automatic meter reading
• Strainers
• Water quality
• Water resources
• Water supply

External links

• DCMMS: A web-based GIS application to record maintenance activities for water and wastewater networks.