Ultracentrifuge

Information about Ultracentrifuge

The ultracentrifuge is a centrifuge optimized for spinning a rotor at very high speeds, capable of generating acceleration as high as 1,000,000 g (9,800 km/sÂ²). There are two kinds of ultracentrifuges, the preparative and the analytical ultracentrifuge. Both classes of instruments find important uses in molecular biology, biochemistry and polymer science. Theodor Svedberg invented the analytical ultracentrifuge in 1923, and won the Nobel Prize in Chemistry in 1926 for his research on colloids and proteins using the ultracentrifuge.

The vacuum ultracentrifuge was invented by Edward Greydon Pickels. It was his contribution of the vacuum which allowed a reduction in friction generated at high speeds. Vacuum systems also enabled the maintenance of constant temperature.

In 1946, Pickels cofounded Spinco (Specialized Instruments Corp.) and marketed an ultracentrifuge based on his design. Pickels, however, considered his design to be complicated and developed a more “foolproof” version. But even with the enhanced design, sales of the technology remained low, and Spinco almost went bankrupt. The company survived and was the first to commercially manufacture ultracentrifuges, in 1947. In 1949, Spinco introduced the Model L, the first preparative ultracentrifuge to reach a maximum speed of 40,000 rpm. In 1954, Beckman Instruments (now Beckman Coulter) purchased the company, forming the basis of its Spinco centrifuge division.

Analytical Ultracentrifuge

In an analytical ultracentrifuge, a sample being spun can be monitored in real time through an optical detection system, using ultraviolet light absorption and/or interference optical refractive index sensitive system. This allows the operator to observe the evolution of the sample concentration versus the axis of rotation profile as a result of the applied centrifugal field. With modern instrumentation, these observations are electronically digitized and stored for further mathematical analysis. Two kinds of experiments are commonly performed on these instruments: sedimentation velocity experiments and sedimentation equilibrium experiments.

Sedimentation velocity experiments aim to interpret the entire time-course of sedimentation, and report on the shape and molar mass of the dissolved macromolecules, as well as their size-distribution. The size resolution of this method scales approximately with the square of the particle radii, and by adjusting the rotor speed of the experiment size-ranges from 100 Da to 10 GDa can be covered. Sedimentation velocity experiments can also be used to study reversible chemical equilibria between macromolecular species, by either monitoring the number and molar mass of macromolecular complexes, by gaining information about the complex composition from multi-signal analysis exploiting differences in each components spectroscopic signal, or by following the composition dependence of the sedimentation rates of the macromolecular system, as described in Gilbert-Jenkins theory.

Sedimentation equilibrium experiments are concerned only with the final steady-state of the experiment, where sedimentation is balanced by diffusion opposing the concentration gradients, resulting in a time-independent concentration profile. Sedimentation equilibrium distributions in the centrifugal field are characterized by Boltzmann distributions. This experiment is insensitive to the shape of the macromolecule, and directly reports on the molar mass of the macromolecules and, for chemically reacting mixtures, on chemical equilibrium constants.

The kinds of information that can be obtained from an analytical ultracentrifuge include the gross shape of macromolecules, the conformational changes in macromolecules, and size distributions of macromolecular samples. For macromolecules, such as proteins, that exist in chemical equilibrium with different non-covalent complexes, the number and subunit stoichiometry of the complexes and equilibrium constant constants can be studied.

Preparative Ultracentrifuge

Preparative ultracentrifuges are available with a wide variety of rotors suitable for a great range of experiments. Most rotors are designed to hold tubes that contain the samples. Swinging bucket rotors allow the tubes to hang on hinges so the tubes reorient to the horizontal as the rotor initially accelerates. Fixed angle rotors are made of a single block of metal and hold the tubes in cavities bored at a predetermined angle. Zonal rotors are designed to contain a large volume of sample in a single central cavity rather than in tubes. Some zonal rotors are capable of dynamic loading and unloading of samples while the rotor is spinning at high speed.

Preparative rotors are used in biology for pelleting of fine particulate fractions, such as cellular organelles (mitochondria, microsomes, ribosomes) and viruses. They can also be used for gradient separations, in which the tubes are filled from top to bottom with an increasing concentration of a dense substance in solution. Sucrose gradients are typically used for separation of cellular organelles. Gradients of cesium salts are used for separation of nucleic acids. After the sample has spun at high speed for sufficient time to produce the separation, the rotor is allowed to coast to a smooth stop and the gradient is gently pumped out of each tube to isolate the separated components.

Hazards

The tremendous rotational kinetic energy of the rotor in an operating ultracentrifuge makes the catastrophic failure of a spinning rotor a serious concern. The stresses of routine use and harsh chemical solutions eventually cause rotors to deteriorate. Proper use of the instrument and rotors within recommended limits and careful maintenance of rotors to prevent corrosion and to detect deterioration are necessary to avoid this hazard.

External links

centrifuge is a piece of equipment, generally driven by a motor, that puts an object in rotation around a fixed axis, applying force perpendicular to the axis. The centrifuge works using the sedimentation principle, where the centripetal acceleration is used to separate substances
..... Click the link for more information.

Theodor Svedberg

Theodor Svedberg
Born 30 July 1884
FlerÃ¤ng, Valbo, GÃ¤vleborg, Sweden
..... Click the link for more information.

19th century - 20th century - 21st century
1890s 1900s 1910s - 1920s - 1930s 1940s 1950s
1920 1921 1922 - 1923 - 1924 1925 1926

Year 1923 (MCMXXIII
..... Click the link for more information.

Nobel Prize in Chemistry (Swedish: Nobelpriset i kemi) is awarded once a year by the Royal Swedish Academy of Sciences. It is one of the six Nobel Prizes. The first prize was awarded in 1901.
..... Click the link for more information.

19th century - 20th century - 21st century
1890s 1900s 1910s - 1920s - 1930s 1940s 1950s
1923 1924 1925 - 1926 - 1927 1928 1929

Year 1926 (MCMXXVI
..... Click the link for more information.

A vacuum is a volume of space that is essentially empty of matter, such that its gaseous pressure is much less than standard atmospheric pressure. The Latin term in vacuo is used to describe an object as being in what would otherwise be a vacuum.
..... Click the link for more information.

Friction is the force of two surfaces in contact. It is not a fundamental force, as it is derived from electromagnetic forces between atoms. When contacting surfaces move relative to each other, the friction between the two objects converts kinetic energy into thermal energy, or
..... Click the link for more information.

trillion fold).]]

Temperature is a physical property of a system that underlies the common notions of hot and cold; something that is hotter generally has the greater temperature. Temperature is one of the principal parameters of thermodynamics.
..... Click the link for more information.

19th century - 20th century - 21st century
1910s 1920s 1930s - 1940s - 1950s 1960s 1970s
1943 1944 1945 - 1946 - 1947 1948 1949

Year 1646 (MCMXLVI
..... Click the link for more information.

19th century - 20th century - 21st century
1910s 1920s 1930s - 1940s - 1950s 1960s 1970s
1944 1945 1946 - 1947 - 1948 1949 1950

Year 1947 (MCMXLVII
..... Click the link for more information.

19th century - 20th century - 21st century
1910s 1920s 1930s - 1940s - 1950s 1960s 1970s
1946 1947 1948 - 1949 - 1950 1951 1952

Year 1949 (MCMXLIX
..... Click the link for more information.

Revolutions per minute (abbreviated rpm, RPM, r/min, or rÂ·min⁻¹) is a unit of frequency: the number of full rotations completed in one minute around a fixed axis.
..... Click the link for more information.

19th century - 20th century - 21st century
1920s 1930s 1940s - 1950s - 1960s 1970s 1980s
1951 1952 1953 - 1954 - 1955 1956 1957

Year 1954 (MCMLIV
..... Click the link for more information.

This article needs sources or references that appear in reliable, third-party publications. Alone, primary sources and sources affiliated with the subject of this article are not sufficient for an accurate encyclopedia article.
..... Click the link for more information.

Ludwig Boltzmann

Ludwig Eduard Boltzmann (1844-1906)
Born January 20 1844
Vienna, Austrian Empire
..... Click the link for more information.

chemical equilibrium is the state in which the chemical activities or concentrations of the reactants and products have no net change over time. Usually, this state results when the forward chemical process proceeds at the same rate as their reverse reaction.
..... Click the link for more information.

macromolecule implies large molecule. In the context of science and engineering, the term may be applied to conventional polymers and biopolymers (such as DNA) as well as non-polymeric molecules with large molecular mass such as lipids or macrocycles.
..... Click the link for more information.

Proteins are large organic compounds made of amino acids arranged in a linear chain and joined together by peptide bonds between the carboxyl and amino groups of adjacent amino acid residues.
..... Click the link for more information.

Stoichiometry (sometimes called reaction stoichiometry to distinguish it from composition stoichiometry) is the calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).
..... Click the link for more information.

Editing of this page by unregistered or newly registered users is currently disabled due to vandalism.
If you are prevented from editing this page, and you wish to make a change, please discuss changes on the talk page, request unprotection, log in, or .
..... Click the link for more information.

In cell biology, a microsome is a small vesicle that is derived from fragmented smooth endoplasmic reticulum (SER) produced when tissues such as liver are mechanically broken (homogenized).
..... Click the link for more information.

A ribosome is a small, dense, functional structure found in most known cells that assemble proteins and polypeptides used in cell division. It catalyses the assembly of individual amino acids into polypeptide chains by reading messenger RNAs and binding amino acids that are
..... Click the link for more information.

gradient of a scalar field is a vector field which points in the direction of the greatest rate of increase of the scalar field, and whose magnitude is the greatest rate of change.
..... Click the link for more information.

Sucrose (common name: table sugar, also called saccharose) is a disaccharide (glucose + fructose) with the molecular formula C₁₂H₂₂O₁₁. Its systematic name is α-D-glucopyranosyl-(1→2)-β-D-fructofuranose.
..... Click the link for more information.

Caesium (also spelled cesium, IPA: /ˈsiːziəm/) is a chemical element in the periodic table that has the symbol Cs and atomic number 55.
..... Click the link for more information.

kinetic energy of an object is the extra energy which it possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its current velocity.
..... Click the link for more information.

This article is copied from an article on Wikipedia.org - the free encyclopedia created and edited by online user community. The text was not checked or edited by anyone on our staff. Although the vast majority of the wikipedia encyclopedia articles provide accurate and timely information please do not assume the accuracy of any particular article. This article is distributed under the terms of GNU Free Documentation License.

Herod_Archelaus

iPedia Free Information Center