Information about Trumpeter



The trumpet is a musical instrument in the brass family. The trumpet has the highest register in the brass section; a standard B flat trumpet has a range comparable to the B flat cornet, a piccolo trumpet is an octave higher. A musician who plays the trumpet is called a trumpet player or trumpeter. The most common trumpet by far is a transposing instrument pitched in B flat - the note read as middle C sounds as the B flat 2 semitones below - but there are many other trumpets in this family of instruments.

Construction

The trumpet is constructed of brass tubing bent into a rough spiral. The trumpet and trombone share a cylindrical bore which results in a bright, loud sound. By comparison, the cornet and flugelhorn have a conical bore and produce a more mellow tone. More precisely, the bore is a complex series of tapers, smaller at the mouthpiece receiver and larger just before the flare of the bell begins; careful design of these tapers is critical to the intonation of the instrument.

As with all brass instruments, sound is produced by blowing air through closed lips, producing a "buzzing" sound into the mouthpiece and starting a standing wave vibration in the air column inside the trumpet. The player can select the pitch from a range of overtones or harmonics by changing the lip aperture and tension (known as the embouchure). Modern trumpets also have three piston valves, each of which increases the length of tubing when engaged, thereby lowering the pitch. The first valve lowers the instrument's pitch by a whole step (2 semitones), the second valve by a half step (1 semitone), and the third valve by one-and-a-half steps (3 semitones). When a fourth valve is present, as with some piccolo trumpets, it lowers the pitch a perfect fourth (5 semitones). Used alone and in combination these valves make the instrument fully chromatic, i.e., able to play all twelve pitches of Western music. The sound is projected outward by the bell.

The trumpet's harmonic series is closely matched to the musical scale, but there are some notes in the series which are a compromise and thus slightly off key; these are known as wolf tones. Some trumpets have a slide mechanism built in to compensate for this.

The mouthpiecehas a circular rim which provides a comfortable environment for the lips' vibration. Directly behind the rim is the cup, which channels the air into a much smaller opening (the backbore or shank) which tapers out slightly to match the diameter of the trumpet's lead pipe. The dimensions of these parts of the mouthpiece affect the timbre or quality of sound, the ease of playability, and player comfort. Generally, the wider and deeper the cup, the darker the sound and timbre.

Types of trumpets

The most common type is the B-flat trumpet, but C, D, E-flat, E, F, G and A trumpets are also available. The C trumpet is most commonly used in American orchestral playing, where its slightly smaller size gives it a brighter, more lively sound than the B-flat trumpet. Because music written for early trumpets required the use of a different trumpet for each key — they did not have valves and therefore were not chromatic — and also because a player may choose to play a particular passage on a different trumpet from the one indicated on the written music, orchestra trumpet players are generally adept at transposing music at sight, sometimes playing music written for the B-flat trumpet on the C trumpet, and vice versa.

Each trumpet's range extends from the written F sharp immediately below Middle C up to about three octaves higher. Standard repertoire rarely calls for notes beyond this range, and the fingering tables of most method books peak at the C (high C) two octaves above middle C. Several trumpeters have achieved fame for their proficiency in the extreme high register, among them Bill Chase, Roger Ingram, Maynard Ferguson, Wayne Bergeron, Dizzy Gillespie, Jon Faddis, Cat Anderson, Malcolm McNab, James Morrison,and Arturo Sandoval. It is also possible to produce pedal tones below the low F sharp, although this technique is more often encountered as a sound-production exercise rather than as a written trumpet part.

Enlarge picture
Piccolo trumpet in B-flat, with swappable leadpipes to tune the instrument to B-flat (shorter) or A (longer)
The smallest trumpets are referred to as piccolo trumpets. The most common of these are built to play in both B-flat and A, with separate leadpipes for each key. The tubing in the B-flat piccolo trumpet is one-half the length of that in a standard B-flat trumpet. Piccolo trumpets in G, F and even C are also manufactured, but are rarer. Many players use a smaller mouthpiece on the piccolo trumpet. Because of the smaller mouthpiece size, endurance is often limited and the sound production technique is different from that used on the B-flat trumpet. Almost all piccolo trumpets have four valves instead of the usual three: the fourth valve lowers the pitch, usually by a fourth, to facilitate the playing of lower notes. Maurice André, Håkan Hardenberger, and Wynton Marsalis are some well-known piccolo trumpet players.

Trumpets pitched in the key of G are also called sopranos, or soprano bugles, after their adaptation from military bugles. Traditionally used in drum and bugle corps, sopranos have featured both rotary valves and piston valves.

The bass trumpet is usually played by a trombone player, being at the same pitch and using a similar mouthpiece. Bass trumpet is played with a trombone or euphonium mouthpiece, and music for it is written in treble clef.

Enlarge picture
trumpet in C with rotary valves
The modern slide trumpet is a B-flat trumpet that has a slide instead of valves. It is similar to a soprano trombone. The first slide trumpets emerged during the Renaissance, predating the modern trombone, and are the first attempts to increase chromaticism on the instrument. Slide trumpets were the first trumpets allowed in the Christian church.[1]

The historical slide trumpet probably was first developed in the late fourteenth century, for use in alta capella wind bands. Deriving from early straight trumpets, the Renaissance slide trumpet was essentially a natural trumpet with a sliding leadpipe. This single slide was rather awkward, as the entire corpus of the instrument moved; also, the range of this slide was probably no more than a major third. Originals were probably pitched in D, to fit with shawms in D and G - probably at a typical pitch standard near A=466. As no instruments from this period are known to survive, the details - and even the existence - of a Renaissance slide trumpet is a matter of some conjecture, and there continues to be some debate among scholars.

Some slide trumpet designs saw use in England in the eighteenth century; the 'tromba da tirarsi' called for in some Bach cantatas may also have been some manner of slide trumpet.

The pocket trumpet is a compact B-flat trumpet. The bell is usually smaller than a standard trumpet and the tubing is more tightly wound to reduce the instrument size without reducing the total tube length. Its design is not standardized, and the quality of various models varies greatly. It can have a tone quality and projection unique in the trumpet world: a warm sound and a voice-like articulation. Unfortunately, since many pocket trumpet models suffer from poor design as well as cheap and sloppy manufacturing, the intonation, tone color and dynamic range of such instruments are severely hindered. Professional-standard instruments are, however, available. While they are not a substitute for the full-sized instrument, they can be useful in certain contexts.

There are also rotary-valve, or German, trumpets, as well as alto and Baroque trumpets.

The trumpet is often confused with its close relative, the cornet, which has a more conical tubing shape compared to the trumpet's more cylindrical tube. This, along with additional bends in the cornet's tubing, gives the cornet a slightly mellower tone, but the instruments are otherwise nearly identical. They have the same length of tubing and, therefore, the same pitch, so music written for cornet and trumpet is interchangeable. Another relative, the flugelhorn, has tubing that is even more conical than that of the cornet, and an even richer tone. It is sometimes augmented with a fourth valve to improve the intonation of some lower notes.

History

Enlarge picture
Moche Trumpet. 300 A.D. Larco Museum Collection Lima, Peru.
The oldest trumpets date back to 1500 B.C.E. and earlier. The bronze and silver trumpets from Tutankhamun's grave in Egypt, bronze lurs from Scandinavia, and metal trumpets from China date back to this period.[2] Trumpets from the Oxus civilization (3rd millennium B.C.E.) of Central Asia have decorated swellings in the middle, yet are made out of one sheet of metal, which is considered a technical wonder.[3] The Moche people of ancient Peru depicted trumpets in their art dating back to 300 A.D. [4] The earliest trumpets were signaling instruments used for military or religious purposes, rather than music in the modern sense. "The sound of these instruments was described as terrible, that is, producing terror, and was compared to the braying of an ass." The modern bugle continues the signaling tradition, with different tunes corresponding to different instructions, but the advent of radio made its use more ceremonial.
Enlarge picture
Reproduction Baroque trumpet by Michael Laird
In medieval times, trumpet playing was a guarded craft, its instruction occurring only within highly selective guilds. The trumpet players were often among the most heavily guarded members of a troop, as they were relied upon to relay instructions to other sections of the army. Improvements to instrument design and metal making in the late Middle Ages and Renaissance led to an increased usefulness of the trumpet as a musical instrument. The development of the upper, "clarino" register, by specialist trumpeters, would lend itself well to the Baroque era, also known as the "Golden Age of the natural trumpet." The melody-dominated homophony of the classical and romantic periods, relegated the trumpet to a secondary role by most major composers. An exception is Haydn's Trumpet Concerto written for keyed trumpet in 1796. The trumpet was slow to adopt the modern valves (invented around the mid 1830s), and its cousin, the cornet would take the spotlight as solo instrument for the next hundred years. Crooks and shanks (removable tubing of various lengths) as opposed to keys or valves, were standard, into the first part of the 20th century.

The Arabic word for trumpet was naffir. The Spanish used the Arabic name al naffir and changed it into anafil, while the French gave the trumpet its own name, buisine, derived from the Latin word buccina.

Today, the trumpet is used in nearly all forms of music, including classical, jazz, rock, blues, pop, ska, polka and funk. Among the great modern trumpet players are Maurice André, Louis Armstrong, Miles Davis, Dizzy Gillespie, Jon Faddis, Maynard Ferguson, Adolph "Bud" Herseth, Harry James, Charles Schlueter, Malcolm McNab, Wynton Marsalis,Allen Vizzutti, Sergei Nakariakov, Freddie Hubbard, Lee Morgan, Chet Baker, James Morrison, Arturo Sandoval, Doc Severinsen, and Philip Smith. See List of 20th century brass instrumentalists for a more comprehensive list.

Fingering

Trumpeter performing with the United States Air Force Band in Europe
On any trumpet, cornet, or flugelhorn, pressing the valves indicated by the numbers below will produce the written notes shown - "OPEN" means all valves up, "1" means first valve, "1-2" means first and second valve simultaneously and so on. The concert pitch which sounds depends on the transposition of the instrument. Engaging the fourth valve, if present, drops any of these pitches by a perfect fourth as well. Within each overtone series, the different pitches are attained by changing the embouchure, or lip position and tightness, along with increasing air velocity. Standard fingerings above high C are the same as for the notes an octave below (C sharp is 1-2, D is 1, etc.).

Note that the fundamental of each overtone series does not exist - the series begins with the first overtone. Notes in parentheses are the sixth overtone, representing a pitch with a frequency of seven times that of the fundamental; while this pitch is close to the note shown, it is slightly flat relative to equal temperament, and use of those fingerings is generally avoided.



The fingering schemas arises from the length of each valve's tubing (air passing through longer lengths of tubing produces a lower pitch). Valve "1" increases the tubing length enough to lower the pitch by one whole step, valve "2" by one half step, and valve "3" by one and a half steps. This schema and the nature of the overtone series create the possibility of alternate fingerings for certain notes. For example, third-space "C" can be produced with no valves engaged (standard fingering) or with valves 2-3. Also, any note produced with 1-2 as its standard fingering can also be produced with valve 3 - each drops the pitch by 1-1/2 steps. Alternate fingerings may be used to improve facility in certain passages. Extending the third valve slide when using the fingerings 1-3 or 1-2-3 further lowers the pitch slightly to improve intonation.

Solos

Enlarge picture
Trumpet mouthpiece showing the rim, cup, and backbore
The chromatic trumpet was first made in the late 1700s, but there were several solos written for the natural trumpet that are now played on piccolo trumpet. Some important works of trumpet repertoire are:

Chromatic Trumpet Natural Trumpet/Piccolo Trumpet

Other

Instruction and method books

Enlarge picture
Chromatic scale exercises from Arban method
One trumpet method publication of long-standing popularity is Jean-Baptiste Arban's Complete Conservatory Method for Trumpet (Cornet). Other well-known method books include "Technical Studies" by Herbert L. Clarke, "Grand Method" Louis Saint-Jacome, and methods by Claude Gordon and Charles Colin. The Charlier and Brandt books below are used in many college and conservatory trumpet studios, containing drills on permutations of standard orchestral trumpet repertoire, transpositions, and other advanced material. A common method book for beginners is the "Walter Beeler Method", and there have been several instruction books written by virtuoso Allen Vizzutti. The Breeze Eazy method is sometimes used to teach younger students, as it includes general musical information.

Some notable books include:
  • Arban, Jean-Baptiste (1894, 1936, 1982). Arban's Complete Conservatory Method for TRUMPET. Carl Fischer, Inc. ISBN 0-8258-0385-3.
  • Bitsch, Marcel. Vingt Etudes
  • Callet, Jerome, and Bahb Civiletti (2002). Trumpet Secrets: The Secrets of the Tongue-Controlled Embouchure. New York: Royal Press Printing Company.
  • Herbert L. Clarke (1984). Technical Studies for the Cornet,''C. Carl Fischer, Inc. ISBN 0-8258-0158-3.
  • Colin, Charles. Advanced Lip Flexibilities.
  • Schlossberg, Max. Daily Drills & Technical Studies.
  • Vassily Brandt Orchestral Etudes and Last Etudes. ISBN 0-7692-9779-X
  • Theo Charlier. Trente-six Etudes Transcendantes pour Trompette. ISBN M-046-20452-4
  • Robert W. Getchell First & Second Books of Practical Studies for Cornet and Trumpet
  • Pearson, Bruce. Standard of Excellence series
  • Gordon, Claude. Systematic Approach to Daily Practice for Trumpet

Further reading

  • The music and history of the baroque trumpet before 1721, 1973, ISBN 0815621574
  • The trumpet and trombone : an outline of their history, development, and construction, 1978, ISBN 0393021297
  • The trumpeter's handbook : a comprehensive guide to playing and teaching the trumpet, 1979, ISBN 0918194024
  • You can't be timid with a trumpet : notes from the orchestra, 1980, ISBN 0688419631
  • The art of the trumpet-maker : the materials, tools, and techniques of the seventeeth [sic] and eighteenth centuries in Nuremberg, 1992, ISBN 0198162235
  • The last trumpet : a history of the English slide trumpet, 1996, ISBN 0945193815
  • Trumpet technique, 2005, ISBN 0195166922

Notes

1. ^ Tarr
2. ^ Edward Tarr, The Trumpet (Portland, Oregon: Amadeus Press, 1988), 20-30.
3. ^ "Trumpet with a swelling decorated with a human head," Musée du Louvre, [2]
4. ^ Berrin, Katherine & Larco Museum. The Spirit of Ancient Peru:Treasures from the Museo Arqueológico Rafael Larco Herrera. New York: Thames and Hudson, 1997.

See also

External links

Trumpeter may refer to:

People
  • A musician who plays the trumpet.
Animals
  • Trumpeter Finch, a small passerine bird
  • Several birds in the family Psophiidae:
*Grey-winged Trumpeter
*Trumpeter (bird)

..... Click the link for more information.
A musical instrument is a device constructed or modified with the purpose of making music. In principle anything that, produces sound, and can somehow be controlled by a person playing it, can serve as a musical instrument.
..... Click the link for more information.
brass instrument is a musical instrument whose tone is produced by vibration of the lips as the player blows into a tubular resonator. They are also called labrosones, literally meaning "lip-vibrated instruments" (Baines, 1993).
..... Click the link for more information.
cornet is a brass instrument that visually resembles the trumpet. It is not to be confused with the Medieval instrument, the cornett or cornetto. It differs from the trumpet in that it has a conical bore, a compact shape, and a mellower tone quality.
..... Click the link for more information.
A transposing instrument is a musical instrument whose music is written at a pitch different from concert pitch. Concert pitch is the pitch as notated for piano (or any other non-transposing instrument) - e.g., the note "C" on piano is a concert C.
..... Click the link for more information.
Do or C is the first note of the fixed-Do solfege.

In Western music, the expression "middle C" refers to the note "C" (or "Do" in fixed-Do solfege) located exactly between the two staves of the grand staff, quoted as C4 in scientific pitch
..... Click the link for more information.
semitone
Inverse major seventh; diminished octave
Name
Other names minor second
or diatonic semitone;
augmented unison
or chromatic semitone
Abbreviation m2; aug1
Size
Semitones 1
Interval class 1

..... Click the link for more information.
A family of musical instruments is a grouping of several different but related sizes or types of instruments. Some schemes of musical instrument classification, such as the Hornbostel-Sachs system, are based on a hierarchy of instrument families and families of families.
..... Click the link for more information.
Brass is any alloy of copper and zinc; the proportions of zinc and copper can be varied to create a range of brasses, each of which has unique properties[1]. Note that in comparison bronze is principally an alloy of copper and tin.[2].
..... Click the link for more information.
spiral is a curve which emanates from a central point, getting progressively farther away as it revolves around the point.

Spiral or helix

A "spiral" and a "helix" are two terms that are easily confused, but represent different objects.
..... Click the link for more information.
The trombone is a musical instrument in the brass family. Like all brass instruments, it is a lip-reed aerophone; sound is produced when the player’s buzzing lips (embouchure) cause the air column inside the instrument to vibrate.
..... Click the link for more information.
cylinder is a quadric surface, with the following equation in Cartesian coordinates:



This equation is for an elliptic cylinder, a generalization of the ordinary, circular cylinder (a = b).
..... Click the link for more information.
The flugelhorn (also spelled fluegelhorn or flügelhorn) is a brass instrument resembling a trumpet but with a wider, conical bore. Some consider it to be a member of the saxhorn family developed by Adolphe Sax (who also developed the saxophone); however, other
..... Click the link for more information.
In music, there are two common meanings for tuning:
  • Tuning practice, the act of tuning an instrument or voice.
  • Tuning systems, the various systems of pitches used to tune an instrument, and their theoretical basis.

..... Click the link for more information.
mouthpiece is the part of the instrument which is placed upon the player's lips. The purpose of the mouthpiece is a resonator, which passes vibration from the lips to the column of air contained within the instrument, giving rise to the standing wave pattern of vibration in the air
..... Click the link for more information.
standing wave, also known as a stationary wave, is a wave that remains in a constant position. This phenomenon can occur because the medium is moving in the opposite direction to the wave, or it can arise in a stationary medium as a result of interference between two waves
..... Click the link for more information.
Pitch is the perceived fundamental frequency of a sound. While the actual fundamental frequency can be precisely determined through physical measurement, it may differ from the perceived pitch because of overtones, or partials, in the sound.
..... Click the link for more information.
"Overtones" redirects here. For the album by Just Jack, see Overtones (album).


An overtone is a natural resonance or vibration frequency of a system.
..... Click the link for more information.
harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency. For example, if the frequency is f, the harmonics have frequency 2f, 3f, 4f, etc.
..... Click the link for more information.
The embouchure is the use of facial muscles and the shaping of the lips to the mouthpiece of a wind instrument. Less frequently, it is used to mean the mouthpiece itself. The word is of French origin and is related to the root bouche (fr.), 'mouth'.
..... Click the link for more information.
A piston valve is a device used to control the motion of a fluid along a tube or pipe by means of the linear motion of a piston within a chamber or cylinder.

Examples of piston valves are:

..... Click the link for more information.
semitone
Inverse major seventh; diminished octave
Name
Other names minor second
or diatonic semitone;
augmented unison
or chromatic semitone
Abbreviation m2; aug1
Size
Semitones 1
Interval class 1

..... Click the link for more information.
piccolo trumpet ("picc" in trumpeter slang). The most common of these are built to play in both B-flat and A, with separate leadpipes for each key. The tubing in the B-flat piccolo trumpet is exactly one-half the length of that in a standard B-flat trumpet.
..... Click the link for more information.
perfect fourth
Inverse perfect fifth
Name
Other names diatessaron
Abbreviation P4
Size
Semitones 5
Interval class 5
Just interval 4:3
Cents
Equal temperament 500
Just intonation ~498.
..... Click the link for more information.
The chromatic scale is a musical scale with twelve pitches, each a semitone or half step apart.

The most common conception of the chromatic scale before equal temperament was the Pythagorean chromatic scale, which is essentially a series of eleven 3:2 perfect fifths.
..... Click the link for more information.
Western music is the genres of music originating in the Western world (Europe and its former colonies) including Western classical music, American Jazz, Country and Western, pop music and rock and roll.
..... Click the link for more information.
For similar sounding terms, see wolf tone (disambiguation)
A wolf tone or wolf note is a note that is not properly harmonious.

The even-tempered scale

In tuning, a wolf tone is one which is not perfectly aligned in the harmonic series.
..... Click the link for more information.
In music, timbre, or sometimes timber, (from Fr. timbre; IPA /'tæmbəɹ/ as in the first two syllables of tambourine, or /'tɪmbəɹ/, like timber)[1]
..... Click the link for more information.
orchestra is an instrumental ensemble, usually fairly large with string, brass, woodwind sections, and possibly a percussion section as well. The term orchestra derives from the name for the area in front of an ancient Greek stage reserved for the Greek chorus.
..... Click the link for more information.
Do or C is the first note of the fixed-Do solfege.

In Western music, the expression "middle C" refers to the note "C" (or "Do" in fixed-Do solfege) located exactly between the two staves of the grand staff, quoted as C4 in scientific pitch
..... Click the link for more information.


This article is copied from an article on Wikipedia.org - the free encyclopedia created and edited by online user community. The text was not checked or edited by anyone on our staff. Although the vast majority of the wikipedia encyclopedia articles provide accurate and timely information please do not assume the accuracy of any particular article. This article is distributed under the terms of GNU Free Documentation License.
Herod_Archelaus


page counter