Information about Repeater
A repeater is an electronic device that receives a
signal and retransmits it at a higher level or higher power, or onto the other side of an obstruction, so that the signal can cover longer distances without degradation.
The term "repeater" originated with telegraphy and referred to an electromechanical device used to regenerate telegraph signals. Use of the term has continued in telephony and data communications.
In telecommunication, the term repeater has the following standardized meanings:
(Source: from Federal Standard 1037C in support of MIL-STD-188)
Because repeaters work with the actual physical signal, and do not attempt to interpret the data being transmitted, they operate on the Physical layer, the first layer of the OSI model.
A digipeater is a blend meaning "digital repeater", particularly used in amateur radio. Store and forward digipeaters generally receive a packet radio transmission and then retransmit it on the same frequency, unlike repeaters that receive on one and transmit on another frequency.
Repeaters are often used in trans-continental and trans-oceanic cables, because the attenuation (signal loss) over such distances would be completely unacceptable without them. Repeaters are used in both copper-wire cables carrying electrical signals, and in fibre optics carrying light - see Optical communications repeater.
Repeaters are used in radio communication services - see Radio Repeater. Radio repeaters often transmit and receive on different frequencies. A special subgroup of those repeaters is those used in amateur radio - see amateur radio repeater.
Repeaters are also used extensively in broadcasting, where they are known as translators or boosters. See broadcast translator for more.
When providing a point-to-point telecom link using radio beyond line of sight, one uses repeaters in a microwave radio relay. A reflector, often on a mountaintop, that relays such signals around an obstacle, is called a passive repeater or Passive Radio Link Deflection.
In optical communications the term repeater is used to describe a piece of equipment that receives an optical signal, converts that signal into an electrical one, regenerates it, and then retransmits an optical signal. Since such a device converts the optical signal into an electrical one, and then back to an optical signal, they are often known as Optical-Electrical-Optical (OEO) repeaters.
Before the invention of electronic amplifiers, mechanically coupled carbon microphones were used as amplifiers in telephone repeaters. The invention of the audion tube made transcontinental telephony practical. In the 1930s vacuum tube repeaters using hybrid coils became commonplace, allowing the use of thinner wires. In the 1950s negative impedance gain devices were more popular, and a transistorized version called the E6 repeater was the final major type used in the Bell System before the low cost of digital transmission made all voiceband repeaters obsolete.
Debt, AIDS, Trade in Africa (or DATA) is a multinational non-government organization founded in January 2002 in London by U2's Bono along with Bobby Shriver and activists from the Jubilee 2000 Drop
..... Click the link for more information.
The term "repeater" originated with telegraphy and referred to an electromechanical device used to regenerate telegraph signals. Use of the term has continued in telephony and data communications.
In telecommunication, the term repeater has the following standardized meanings:
- An analog device that amplifies an input signal regardless of its nature (analog or digital).
- A digital device that amplifies, reshapes, retimes, or performs a combination of any of these functions on a digital input signal for retransmission.
(Source: from Federal Standard 1037C in support of MIL-STD-188)
Because repeaters work with the actual physical signal, and do not attempt to interpret the data being transmitted, they operate on the Physical layer, the first layer of the OSI model.
A digipeater is a blend meaning "digital repeater", particularly used in amateur radio. Store and forward digipeaters generally receive a packet radio transmission and then retransmit it on the same frequency, unlike repeaters that receive on one and transmit on another frequency.
Repeaters are often used in trans-continental and trans-oceanic cables, because the attenuation (signal loss) over such distances would be completely unacceptable without them. Repeaters are used in both copper-wire cables carrying electrical signals, and in fibre optics carrying light - see Optical communications repeater.
Repeaters are used in radio communication services - see Radio Repeater. Radio repeaters often transmit and receive on different frequencies. A special subgroup of those repeaters is those used in amateur radio - see amateur radio repeater.
Repeaters are also used extensively in broadcasting, where they are known as translators or boosters. See broadcast translator for more.
When providing a point-to-point telecom link using radio beyond line of sight, one uses repeaters in a microwave radio relay. A reflector, often on a mountaintop, that relays such signals around an obstacle, is called a passive repeater or Passive Radio Link Deflection.
In optical communications the term repeater is used to describe a piece of equipment that receives an optical signal, converts that signal into an electrical one, regenerates it, and then retransmits an optical signal. Since such a device converts the optical signal into an electrical one, and then back to an optical signal, they are often known as Optical-Electrical-Optical (OEO) repeaters.
Before the invention of electronic amplifiers, mechanically coupled carbon microphones were used as amplifiers in telephone repeaters. The invention of the audion tube made transcontinental telephony practical. In the 1930s vacuum tube repeaters using hybrid coils became commonplace, allowing the use of thinner wires. In the 1950s negative impedance gain devices were more popular, and a transistorized version called the E6 repeater was the final major type used in the Bell System before the low cost of digital transmission made all voiceband repeaters obsolete.
See also
- 12-channel carrier system
- Amateur radio repeater
- Broadcast translator
- Cellular repeater (also known as cell phone repeater)
- Ethernet hub - can be considered a multiport repeater
- L-carrier
- Microwave radio relay
- Optical communications repeater
- Radio repeater
- Repeater insertion in integrated circuits
- Signal strength
- Wireless Distribution System
Repeater lists
References
Electronics is the study of the flow of charge through various materials and devices such as, semiconductors, resistors, inductors, capacitors, nano-structures, and vacuum tubes. All applications of electronics involve the transmission of power and possibly information.
..... Click the link for more information.
..... Click the link for more information.
signal is any time-varying quantity. Signals are often scalar-valued functions of time (waveforms), but may be vector valued and may be functions of any other relevant independent variable.
The concept is broad, and hard to define precisely.
..... Click the link for more information.
The concept is broad, and hard to define precisely.
..... Click the link for more information.
Retransmission might refer to:
..... Click the link for more information.
- Retransmission (data networks), the resending of packets which have been damaged or lost
- Replication of a signal at a repeater
..... Click the link for more information.
Telegraphy (from the Greek words (τηλη) = far and (γραφειν) = write) is the long-distance transmission of written messages without physical transport of letters, originally by changing something that could
..... Click the link for more information.
..... Click the link for more information.
In engineering, electromechanics combines the sciences of electromagnetism of electrical engineering and mechanics. Mechatronics is the discipline of engineering that combines mechanics, electronics and information technology (software engineering).
..... Click the link for more information.
..... Click the link for more information.
In telecommunication, telephony (IPA pronunciation: [tə'lɛfəˌni]) encompasses the general use of equipment to provide voice communication over distances, specifically by connecting telephones to each other.
..... Click the link for more information.
..... Click the link for more information.
- For other uses, see Data (disambiguation).
Debt, AIDS, Trade in Africa (or DATA) is a multinational non-government organization founded in January 2002 in London by U2's Bono along with Bobby Shriver and activists from the Jubilee 2000 Drop
..... Click the link for more information.
Telecommunication is the transmission of signals over a distance for the purpose of communication. In modern times, this process typically involves the sending of electromagnetic waves by electronic transmitters, but in earlier times telecommunication may have involved the use of
..... Click the link for more information.
..... Click the link for more information.
Telecommunication is the transmission of signals over a distance for the purpose of communication. In modern times, this process typically involves the sending of electromagnetic waves by electronic transmitters, but in earlier times telecommunication may have involved the use of
..... Click the link for more information.
..... Click the link for more information.
An analog or analogue signal is any time continuous signal where some time varying feature of the signal is a representation of some other time varying quantity. It differs from a digital signal in that small fluctuations in the signal are meaningful.
..... Click the link for more information.
..... Click the link for more information.
An information appliance (IA) is a device that focuses on handling a particular type of information and related tasks. Typical devices are smartphones and PDAs. The term is often confused with internet appliance, a type of consumer product which accesses services on the Internet.
..... Click the link for more information.
..... Click the link for more information.
amplifier is any device that will use a small amount of energy and convert it to a larger amount of energy. In popular use, the term today usually refers to an electronic amplifier, often as in audio applications.
..... Click the link for more information.
..... Click the link for more information.
Input is the term denoting either an entrance or changes which are inserted into a system and which activate/modify a process. It is an abstract concept, used in the modeling, system(s) design and system(s) exploitation. It is usually connected with other terms, e.g.
..... Click the link for more information.
..... Click the link for more information.
signal is any time-varying quantity. Signals are often scalar-valued functions of time (waveforms), but may be vector valued and may be functions of any other relevant independent variable.
The concept is broad, and hard to define precisely.
..... Click the link for more information.
The concept is broad, and hard to define precisely.
..... Click the link for more information.
A digital system is one that uses discrete values (often electrical voltages), representing numbers or non-numeric symbols such as letters or icons, for input, processing, transmission, storage, or display, rather than a continuous range of values (ie, as in an analog system).
..... Click the link for more information.
..... Click the link for more information.
A digital system is one that uses discrete values (often electrical voltages), representing numbers or non-numeric symbols such as letters or icons, for input, processing, transmission, storage, or display, rather than a continuous range of values (ie, as in an analog system).
..... Click the link for more information.
..... Click the link for more information.
In telecommunications, transmission is the forwarding of signal traffic over distances that are too great to be simply connected by a twisted pair wires. Techniques available now may be microwave link, satellite link, coaxial cable or fibre optic cable.
..... Click the link for more information.
..... Click the link for more information.
Federal Standard 1037C, entitled Telecommunications: Glossary of Telecommunication Terms is a United States Federal Standard, issued by the General Services Administration pursuant to the Federal Property and Administrative Services Act of 1949, as amended.
..... Click the link for more information.
..... Click the link for more information.
MIL-STD-188 is a series of U.S. military standards relating to telecommunications.
..... Click the link for more information.
Purpose
Faced with “past technical deficiencies in telecommunications systems and equipment and software…that were traced to basic inadequacies in the application of..... Click the link for more information.
Open Systems Interconnection Basic Reference Model (OSI Reference Model or OSI Model for short) is a layered, abstract description for communications and computer network protocol design, developed as part of the Open Systems Interconnection (OSI) initiative.
..... Click the link for more information.
..... Click the link for more information.
blend is a word formed from parts of two other words. These parts are sometimes, but not always, morphemes.
A blend is different from a portmanteau word in that a portmanteau refers strictly to a blending of two function words, similar to a contraction.
..... Click the link for more information.
A blend is different from a portmanteau word in that a portmanteau refers strictly to a blending of two function words, similar to a contraction.
..... Click the link for more information.
Amateur radio, often called ham radio, is both a hobby and a service that uses various types of radio communications equipment to communicate with other radio amateurs for public service, recreation and self-training.
..... Click the link for more information.
..... Click the link for more information.
Store and forward is a telecommunications technique in which information is sent to an intermediate station where it is kept and sent at a later time to the final destination or to another intermediate station.
..... Click the link for more information.
..... Click the link for more information.
Packet radio is a form of digital data transmission used to link computers. The most common use of PKT is in amateur radio, to construct wireless computer networks.
..... Click the link for more information.
..... Click the link for more information.
continent is one of several large landmasses on Earth. They are generally identified by convention rather than any strict criteria, but seven areas are commonly regarded as continents – they are (from largest in size to smallest): Asia, Africa, North America, South America,
..... Click the link for more information.
..... Click the link for more information.
Earth's oceans
(World Ocean)
..... Click the link for more information.
(World Ocean)
- Arctic Ocean
- Atlantic Ocean
- Indian Ocean
- Pacific Ocean
- Southern Ocean
..... Click the link for more information.
Attenuation is the reduction in amplitude and intensity of a signal. Signals may be attenuated exponentially by transmission through a medium, in which case attenuation is usually reported in dB with respect to distance traveled through the medium.
..... Click the link for more information.
..... Click the link for more information.
2, 1
(mildly basic oxide)
Electronegativity 1.90 (Pauling scale)
Ionization energies
(more) 1st: 745.5 kJmol−1
2nd: 1957.9 kJmol−1
3rd: 3666 kJmol−1
Atomic radius 135 pm
Atomic radius (calc.
..... Click the link for more information.
(mildly basic oxide)
Electronegativity 1.90 (Pauling scale)
Ionization energies
(more) 1st: 745.5 kJmol−1
2nd: 1957.9 kJmol−1
3rd: 3666 kJmol−1
Atomic radius 135 pm
Atomic radius (calc.
..... Click the link for more information.
A wire is a single, usually cylindrical, elongated strand of drawn metal. Wires are used to bear mechanical loads and to carry electricity and telecommunications signals . Standard sizes are determined by various wire gauges.
..... Click the link for more information.
..... Click the link for more information.
Electricity (from New Latin ēlectricus, "amberlike") is a general term for a variety of phenomena resulting from the presence and flow of electric charge. This includes many well-known physical phenomena such as lightning, electromagnetic fields and electric currents,
..... Click the link for more information.
..... Click the link for more information.
This article is copied from an article on Wikipedia.org - the free encyclopedia created and edited by online user community. The text was not checked or edited by anyone on our staff. Although the vast majority of the wikipedia encyclopedia articles provide accurate and timely information please do not assume the accuracy of any particular article. This article is distributed under the terms of GNU Free Documentation License.
Herod_Archelaus