Information about Radiograph

Enlarge picture
A radiograph of a right elbow-joint
Radiography is the use of certain types of electromagnetic radiation—usually ionizing—to view objects. The use of non-ionizing radiations (visible light and ultraviolet light) to view objects should be considered as a normal “optical” method (e.g., light microscopy). The modification of an object through the use of ionizing radiation is not radiography. Depending on the nature of the object and the intended outcome it can be radiotherapy, food irradiation, or radiation processing. [1]

Medical and industrial radiography

Radiography is used for both medical and industrial applications; for further details please see the Medical radiography and Industrial radiography pages. If the object being examined is living (human or animal) it is regarded as medical, and all other radiography is regarded as being industrial radiographic work.

History of radiography

Radiography started in 1895 with the discovery of X-rays (also called Roentgen rays after the man who first described their properties in rigorous detail), a type of electromagnetic radiation. Soon X-rays were used in various applications, from helping to fit shoes, to the medical uses that have persisted. X-rays were put to diagnostic use very early, before the dangers of ionizing radiation were discovered. Initially, many kinds of staff conducted radiography in hospitals, including physicists, photographers, doctors, nurses, and engineers. The medical specialty of radiology grew up over many years around the new technology. When new diagnostic tests involving X-rays were developed, it was natural for the radiographers to be trained in and to adopt this new technology. This happened first with fluoroscopy, computed tomography (1960s), mammography, ultrasound (1970s), and magnetic resonance imaging (1980s). Although a nonspecialist dictionary might define radiography quite narrowly as "taking X-ray images", this has long been only part of the work of "X-ray departments", radiographers, and radiologists.

Equipment

Below is a very short overview. For more details please see the radiographic equipment page.

Sources

A number of sources of X-ray photons have been used, these include sealed X-ray tubes, betatrons and linacs. For gamma photons, radioactive sources such as 192Ir have been used.

Detectors

A range of detectors including photographic film, scintillator and semiconductor diode arrays have been used to collect images.

Theory of X-ray attenuation

Medical usage X-ray photons are more likely to be formed by an event involving an electron, while gamma ray photons are more likely to be formed from the nucleus of an atom. In general, medical radiography is done using X-rays formed in an X-ray tube. Nuclear medicine typically involves gamma rays.

The types of electromagnetic radiation of most interest to radiography are X-ray and gamma radiation. This radiation is much more energetic than the more familiar types such as radio waves and visible light. It is this relatively high energy which makes gamma rays useful in radiography but potentially hazardous to living organisms.

The radiation is produced by X-ray tubes, high energy X-ray equipment or natural radioactive elements, such as radium and radon, and artificially produced radioactive isotopes of elements, such as cobalt-60 and iridium-192. Electromagnetic radiation consists of oscillating electric and magnetic fields, but is generally depicted as a single sinusoidal wave. While in the past radium and radon have both been used for radiography, they have fallen out of use as they are radiotoxic alpha radiation emitters which are expensive; iridium-192 and cobalt-60 are far better photon sources. For further details see commonly used gamma emitting isotopes.

Such a wave is characterised by its wavelength (the distance from a point on one cycle to the corresponding point on the next cycle) or its frequency (the number of oscillations per second). In a vacuum, all electromagnetic waves travel at the same speed, the speed of light (c). The wavelength (λ, lambda) and the frequency (f) are all related by the equation:

f = c / λ


This is true for all electromagnetic radiation.

Electromagnetic radiation is known by various names, depending on its energy. The energy of these waves is related to the frequency and the wavelength by the relationship:

E = hf = h (c / λ)


Where h is a constant known as Planck's Constant.

Gamma rays are indirectly ionizing radiation. A gamma ray passes through matter until it undergoes an interaction with an atomic particle, usually an electron. During this interaction, energy is transferred from the gamma ray to the electron, which is a directly ionizing particle. As a result of this energy transfer, the electron is liberated from the atom and proceeds to ionize matter by colliding with other electrons along its path. Other times, the passing gamma ray interferes with the orbit of the electron, and slows it, releasing energy but not becoming dislodged. The atom is not ionised, and the gamma ray continues on, although at a lower energy. This energy released is usually heat or another, weaker photon, and causes biological harm as a radiation burn. The chain reaction caused by the initial dose of radiation can continue after exposure, much like a sunburn continues to damage skin even after one is out of direct sunlight.

For the range of energies commonly used in radiography, the interaction between gamma rays and electrons occurs in two ways. One effect takes place where all the gamma ray's energy is transmitted to an entire atom. The gamma ray no longer exists and an electron emerges from the atom with kinetic (motion in relation to force) energy almost equal to the gamma energy. This effect is predominant at low gamma energies and is known as the photoelectric effect. The other major effect occurs when a gamma ray interacts with an atomic electron, freeing it from the atom and imparting to it only a fraction of the gamma ray's kinetic energy. A secondary gamma ray with less energy (hence lower frequency) also emerges from the interaction. This effect predominates at higher gamma energies and is known as the Compton effect.

In both of these effects the emergent electrons lose their kinetic energy by ionizing surrounding atoms. The density of ions so generated is a measure of the energy delivered to the material by the gamma rays.

The most common means of measuring the variations in a beam of radiation is by observing its effect on a photographic film. This effect is the same as that of light, and the more intense the radiation is, the more it darkens, or exposes, the film. Other methods are in use, such as the ionizing effect measured electronically, its ability to discharge an electrostatically charged plate or to cause certain chemicals to fluoresce as in fluoroscopy.

Obsolete terminology

The term skiagrapher was used until about 1918 to mean radiographer. It was derived from Ancient Greek words for 'shadow' and 'writer'.

See also

References

External links

Electromagnetic (EM) radiation is a self-propagating wave in space with electric and magnetic components. These components oscillate at right angles to each other and to the direction of propagation, and are in phase with each other.
..... Click the link for more information.
Ionizing radiation is energetic particles or waves that have the potential to ionize an atom or molecule through atomic interactions. It is a function of the energy of the individual particles or waves, and not a function of the number of particles or waves present.
..... Click the link for more information.
visible spectrum (or sometimes optical spectrum) is the portion of the electromagnetic spectrum that is visible to (can be detected by) the human eye. Electromagnetic radiation in this range of wavelengths is called visible light or simply light.
..... Click the link for more information.
Ultraviolet (UV) light is electromagnetic radiation with a wavelength shorter than that of visible light, but longer than soft X-rays. It is so named because the spectrum starts with wavelengths slightly shorter than the wavelengths humans identify as the color violet
..... Click the link for more information.
Editing of this page by unregistered or newly registered users is currently disabled due to vandalism.
If you are prevented from editing this page, and you wish to make a change, please discuss changes on the talk page, request unprotection, log in, or .
..... Click the link for more information.
Radiation therapy (or radiotherapy) is the medical use of ionizing radiation as part of cancer treatment to control malignant cells (not to be confused with radiology, the use of radiation in medical imaging and diagnosis).
..... Click the link for more information.
Food irradiation is the process of exposing food to ionizing radiation in order to destroy microorganisms, bacteria, viruses, or insects that might be present in the food. Further applications include sprout inhibition, delay of ripening, increase of juice yield, and improvement of
..... Click the link for more information.
Medicine is the science and "" of maintaining and/or restoring human health through the study, diagnosis, and treatment of patients. The term is derived from the Latin ars medicina meaning the art of healing.
..... Click the link for more information.
Industry (from Latin industrius, "diligent, industrious"), is the segment of economy concerned with production of goods. Industry began in its present form during the 1800s, aided by technological advances, and it has continued to develop to this day.
..... Click the link for more information.
Radiography is the use of ionising electromagnetic radiation to view objects. The modification of objects with radiation is not radiography. In cases of modification, when the object is a human or an animal and the purpose is a cure of disease, it is radiotherapy (or in a few cases
..... Click the link for more information.
Radiography is the use of ionising electromagnetic radiation to view objects in a way that can't be seen otherwise. Radiography in general should not be confused with the use of ionizing radiation to change or modify objects; radiography's purpose is strictly for viewing.
..... Click the link for more information.
Editing of this page by unregistered or newly registered users is currently disabled due to vandalism.
If you are prevented from editing this page, and you wish to make a change, please discuss changes on the talk page, request unprotection, log in, or .
..... Click the link for more information.
Editing of this page by unregistered or newly registered users is currently disabled until (UTC) due to vandalism.
If you are prevented from editing this page, and you wish to make a change, please discuss changes on the talk page, request unprotection, log in, or
..... Click the link for more information.
X-rays (or Röntgen rays) are a form of electromagnetic radiation with a wavelength in the range of 10 to 0.01 nanometers, corresponding to frequencies in the range 30 PHz to 30 EHz. X-rays are primarily used for diagnostic radiography and crystallography.
..... Click the link for more information.
Wilhelm Röntgen

Wilhelm Conrad Röntgen
Born March 27 1845(1845--)
Lennep, Prussia
Died January 10 1923 (aged 79)
..... Click the link for more information.
Electromagnetic (EM) radiation is a self-propagating wave in space with electric and magnetic components. These components oscillate at right angles to each other and to the direction of propagation, and are in phase with each other.
..... Click the link for more information.
A radiologic technologist, or radiographer, is a person who uses ionizing radiation to create medical images of the body to help doctors diagnose and treat illness and injury. They work in hospitals, clinics, medical laboratories, nursing homes, and in private industry.
..... Click the link for more information.
Fluoroscopy is an imaging technique commonly used by physicians to obtain real-time images of the internal structures of a patient through the use of a fluoroscope.
..... Click the link for more information.
Computed tomography (CT), originally known as computed axial tomography (CAT or CT scan) and body section roentgenography, is a medical imaging method employing tomography where digital geometry processing is used to generate a three-dimensional image of the
..... Click the link for more information.
Mammography is the process of using low-dose X-rays (usually around 0.7 mSv) to examine the human breast. It is used to look for different types of tumors and cysts. Mammography has been proven to reduce mortality from breast cancer.
..... Click the link for more information.
Ultrasound is a cyclic sound pressure with a frequency greater than the upper limit of human hearing, this limit being approximately 20 kilohertz (20,000 hertz).

Ability to hear ultrasound


..... Click the link for more information.
Magnetic resonance imaging (MRI), formerly referred to as magnetic resonance tomography (MRT) and, in scientific circles and as originally marketed by companies such as General Electric, nuclear magnetic resonance imaging (NMRI) or NMR zeugmatography imaging
..... Click the link for more information.
This is a page devoted to the equipment used for radiographic work, both medical and industrial.

Photon sources [1]

X-ray sources

A high energy X-ray machine can be used for industrial radiography while for medical radiography a lower voltage can be
..... Click the link for more information.
X-rays (or Röntgen rays) are a form of electromagnetic radiation with a wavelength in the range of 10 to 0.01 nanometers, corresponding to frequencies in the range 30 PHz to 30 EHz. X-rays are primarily used for diagnostic radiography and crystallography.
..... Click the link for more information.
Photon

Photons emitted in a coherent beam from a laser
Composition: Elementary particle
Family: Boson
Group: Gauge boson
Interaction: Electromagnetic
Theorized: Albert Einstein (1905–17)
Symbol: or
Mass: 0[1]
..... Click the link for more information.
An X-ray tube is a vacuum tube that produces X-rays on demand. X-ray tubes are part of X-ray machines. X-rays are part of the electromagnetic spectrum, which extends from radio waves to microwaves, infrared, visible light, ultraviolet, X-rays and gamma rays.
..... Click the link for more information.
A betatron is a particle accelerator developed by Donald Kerst at the University of Illinois in 1940 to accelerate electrons. The betatron is essentially a transformer with a torus-shaped vacuum tube as its secondary coil.
..... Click the link for more information.
Linac or LINAC may refer to
  • LINear particle ACcelerator
  • Linac, a commune of the Lot département, France

..... Click the link for more information.
Gamma (uppercase Γ, lowercase γ) is the third letter of the Greek alphabet. In the system of Greek numerals it has a value of 3. It was derived from the Phoenician letter Gimel .
..... Click the link for more information.
Radioactive decay is the process in which an unstable atomic nucleus loses energy by emitting radiation in the form of particles or electromagnetic waves. This decay, or loss of energy, results in an atom of one type, called the parent nuclide
..... Click the link for more information.


This article is copied from an article on Wikipedia.org - the free encyclopedia created and edited by online user community. The text was not checked or edited by anyone on our staff. Although the vast majority of the wikipedia encyclopedia articles provide accurate and timely information please do not assume the accuracy of any particular article. This article is distributed under the terms of GNU Free Documentation License.
Herod_Archelaus


page counter