Information about Petroleum

Enlarge picture
Pumpjack pumping an oil well near Lubbock, Texas
Enlarge picture
Ignacy Łukasiewicz - inventor of the refining of kerosene from crude oil.


Petroleum (Latin Petroleum derived from Greek πέτρα (Latin petra) - rock + έλαιον (Latin oleum) - oil) or crude oil is a naturally occurring liquid found in formations in the Earth consisting of a complex mixture of hydrocarbons (mostly alkanes) of various lengths. The approximate length range is C5H12 to C18H38. Any shorter hydrocarbons are considered natural gas or natural gas liquids, while long-chain hydrocarbons are more viscous, and the longest chains are paraffin wax. In its naturally occurring form, it may contain other nonmetallic elements such as sulfur, oxygen, and nitrogen.[1] It is usually black or dark brown (although it may be yellowish or even greenish) but varies greatly in appearance, depending on its composition. Crude oil may also be found in semi-solid form mixed with sand, as in the Athabasca oil sands in Canada, where it may be referred to as crude bitumen.

Petroleum is used mostly, by volume, for producing fuel oil and gasoline (petrol), both important "primary energy" sources. [2] 84% by volume of the hydrocarbons present in petroleum is converted into energy-rich fuels (petroleum-based fuels), including gasoline, diesel, jet, heating, and other fuel oils, and liquefied petroleum gas. [3]

Due to its high energy density, easy transportability and relative abundance, it has become the world's most important source of energy since the mid-1950s. Petroleum is also the raw material for many chemical products, including pharmaceuticals, solvents, fertilizers, pesticides, and plastics; the 16% not used for energy production is converted into these other materials.

Petroleum is found in porous rock formations in the upper strata of some areas of the Earth's crust. There is also petroleum in oil sands (tar sands). Known reserves of petroleum are typically estimated at around 1.2 trillion barrels without oil sands [4] , or 3.74 trillion barrels with oil sands [5] . However, oil production from oil sands is currently severely limited. Consumption is currently around 84 million barrels per day, or 3.6 trillion liters per year. Because of reservoir engineering difficulties, recoverable oil reserves are significantly less than total oil-in-place. At current consumption levels, and assuming that oil will be consumed only from reservoirs, known reserves would be gone around 2039, potentially leading to a global energy crisis. However, this ignores any new discoveries, rapidly increasing consumption in China & India, using oil sands, using synthetic petroleum, and other factors which may extend or reduce this estimate.

Formation

Chemistry

Enlarge picture
Octane, a hydrocarbon found in petroleum, lines are single bonds, black spheres are carbon, white spheres are hydrogen
The chemical structure of petroleum is composed of hydrocarbon chains of different lengths. These different hydrocarbon chemicals are separated by distillation at an oil refinery to produce gasoline, jet fuel, kerosene, and other hydrocarbons. The general formula for these alkanes is CnH2n+2. For example 2,2,4-trimethylpentane (isooctane), widely used in gasoline, has a chemical formula of C8H18 and it reacts with oxygen exothermically:[6]



Incomplete combustion of petroleum or gasoline results in production of potentially toxic byproducts. Too little oxygen results in carbon monoxide. Combustion in air (which contains mostly nitrogen) results in nitric oxides. For example:



Formation of petroleum occurs in a variety of mostly endothermic reactions in high temperature and/or pressure. For example, a kerogen may break down into hydrocarbons of different lengths. [7]

Biogenic theory

Most geologists view crude oil and natural gas as the product of compression and heating of ancient organic materials over geological time. Oil is formed from the preserved remains of prehistoric zooplankton and algae which have been settled to the sea (or lake) bottom in large quantities under anoxic conditions. Terrestrial plants, on the other hand, tend to form coal. Over geological time this organic matter, mixed with mud, is buried under heavy layers of sediment. The resulting high levels of heat and pressure cause the organic matter to chemically change during diagenesis, first into a waxy material known as kerogen which is found in various oil shales around the world, and then with more heat into liquid and gaseous hydrocarbons in a process known as catagenesis.

Geologists often refer to an "oil window" which is the temperature range that oil forms in—below the minimum temperature oil remains trapped in the form of kerogen, and above the maximum temperature the oil is converted to natural gas through the process of thermal cracking. Though this happens at different depths in different locations around the world, a 'typical' depth for the oil window might be 4–6 km. Note that even if oil is formed at extreme depths, it may be trapped at much shallower depths, even if it is not formed there (the Athabasca Oil Sands is one example).

Because most hydrocarbons are lighter than rock or water, these often migrate upward through adjacent rock layers until they they either reach the surface or become trapped beneath impermeable rocks, within porous rocks called reservoirs. However, the process is not straightforward since it is influenced by underground water flows, and oil may migrate hundreds of kilometres horizontally or even short distances downward before becoming trapped in a reservoir. Concentration of hydrocarbons in a trap forms an oil field, from which the liquid can be extracted by drilling and pumping.

Three conditions must be present for oil reservoirs to form: first, a source rock rich in organic material buried deep enough for subterranean heat to cook it into oil; second, a porous and permeable reservoir rock for it to accumulate in; and last a cap rock (seal) or other mechanism that prevents it from escaping to the surface. Within these reservoirs fluids will typically organize themselves like a three-layer cake with with a layer of water below the oil layer and a layer of gas above it, although the different layers vary in size between reservoirs.

The vast majority of oil that has been produced by the earth has long ago escaped to the surface and been biodegraded by oil-eating bacteria. Oil companies are looking for the small fraction that has been trapped by this rare combination of circumstances. Oil sands are reservoirs of partially biodegraded oil still in the process of escaping, but contain so much migrating oil that, although most of it has escaped, vast amounts are still present - more than can be found in conventional oil reservoirs. On the other hand, oil shales are source rocks that have never been buried deep enough to convert their trapped kerogen into oil.

The reactions that produce oil and natural gas are often modeled as first order breakdown reactions, where kerogen is broken down to oil and natural gas by a set of parallel reactions, and oil eventually breaks down to natural gas by another set of reactions. The first set was originally patented in 1694 under British Crown Patent No. 330 covering,
"a way to extract and make great quantityes of pitch, tarr, and oyle out of a sort of stone."
The latter set is regularly used in petrochemical plants and oil refineries.

Abiogenic theory

The idea of abiogenic petroleum origin was championed in the Western world by astronomer Thomas Gold based on thoughts from Russia, mainly on studies of Nikolai Kudryavtsev. The idea proposes that hydrocarbons of purely geological origin exist in the planet. Hydrocarbons are less dense than aqueous pore fluids, and are proposed to migrate upward through deep fracture networks. Thermophilic, rock-dwelling microbial life-forms are proposed to be in part responsible for the biomarkers found in petroleum.

This theory is a minority opinion, especially amongst Western geologists; no Western oil companies are currently known to explore for oil based on this theory, although Russia is known to have applied this theory with some success.

Classification

See also:


The oil industry classifies "crude" by the location of its origin (e.g., "West Texas Intermediate, WTI" or "Brent") and often by its relative weight or viscosity ("light", "intermediate" or "heavy"); refiners may also refer to it as "sweet," which means it contains relatively little sulfur, or as "sour," which means it contains substantial amounts of sulfur and requires more refining in order to meet current product specifications. Each crude oil has unique molecular characteristics which are understood by the use of crude oil assay analysis in petroleum laboratories.

Barrels from an area in which the crude oil's molecular characteristics have been determined and the oil has been classified are used as pricing references throughout the world. These references are known as Crude oil benchmarks:

Means of production

Main article: Petroleum Industry

Extraction



The most common method of obtaining petroleum is extracting it from oil wells found in oil fields. With improved technologies and higher demand for hydrocarbons various methods are applied in petroleum exploration and development to optimize the recovery of oil and gas. Primary recovery methods are used to extract oil that is brought to the surface by underground pressure, and can generally recover about 20% of the oil present. The natural pressure can come from several different sources; where it is provided by an underlying water layer it is called a water drive reservoir and where it is from the gas cap above it is called gas drive. After the reservoir pressure has depleted to the point that the oil is no longer brought to the surface, secondary recovery methods draw another 5 to 10% of the oil in the well to the surface. In a water drive oil field, water can be injected into the water layer below the oil, and in a gas drive field it can be injected into the gas cap above to repressurize the reservoir. Finally, when secondary oil recovery methods are no longer viable, tertiary recovery methods reduce the viscosity of the oil in order to bring more to the surface. These generally involve the injection of heat and/or solvents.

Alternative methods

During the last oil price peak, other alternatives to producing oil gained importance. The best known such methods involve extracting oil from sources such as oil shale or tar sands. These resources are known to exist in large quantities; however, extracting the oil at low cost without negatively impacting the environment remains a challenge.

It is also possible to transform natural gas or coal into oil (or, more precisely, the various hydrocarbons found in oil). The best-known such method is the Fischer-Tropsch process. It was a concept pioneered in Nazi Germany when imports of petroleum were restricted due to war and Germany found a method to extract oil from coal. It was known as Ersatz ("substitute" in German), and accounted for nearly half the total oil used in WWII by Germany. However, the process was used only as a last resort as naturally occurring oil was much cheaper. As crude oil prices increase, the cost of coal to oil conversion becomes comparatively cheaper. The method involves converting high ash coal into synthetic oil in a multi-stage process. Ideally, a ton of coal produces nearly 200 liters (1.25 bbl, 52 US gallons) of crude, with by-products ranging from tar to rare chemicals.

Currently, two companies have commercialised their Fischer-Tropsch technology. Shell in Bintulu, Malaysia, uses natural gas as a feedstock, and produces primarily low-sulfur diesel fuels. [8] Sasol [9] in South Africa uses coal as a feedstock, and produces a variety of synthetic petroleum products.

The process is today used in South Africa to produce most of the country's diesel fuel from coal by the company Sasol. The process was used in South Africa to meet its energy needs during its isolation under Apartheid. This process has received renewed attention in the quest to produce low sulfur diesel fuel in order to minimize the environmental impact from the use of diesel engines.

An alternative method of converting coal into petroleum is the Karrick process, which was pioneered in the 1930s in the United States. It uses high temperatures in the absence of ambient air, to distill the short-chain hydrocarbons of petroleum out of coal.

More recently explored is thermal depolymerization (TDP), a process for the reduction of complex organic materials into light crude oil. Using pressure and heat, long chain polymers of hydrogen, oxygen, and carbon decompose into short-chain petroleum hydrocarbons. This mimics the natural geological processes thought to be involved in the production of fossil fuels. In theory, TDP can convert any organic waste into petroleum.

History

Petroleum, in some form or other, is not a substance new in the world's history. More than four thousand years ago, according to Herodotus and confirmed by Diodorus Siculus, asphalt was employed in the construction of the walls and towers of Babylon; there were oil pits near Ardericca (near Babylon), and a pitch spring on Zacynthus.[10] Great quantities of it were found on the banks of the river Issus, one of the tributaries of the Euphrates. Ancient Persian tablets indicate the medicinal and lighting uses of petroleum in the upper levels of their society.

The earliest known oil wells were drilled in China in 347 CE or earlier. They had depths of up to about 800 feet (244 m) and were drilled using bits attached to bamboo poles.[11] The oil was burned to evaporate brine and produce salt. By the 10th century, extensive bamboo pipelines connected oil wells with salt springs. The ancient records of China and Japan are said to contain many allusions to the use of natural gas for lighting and heating. Petroleum was known as burning water in Japan in the 7th century. [11]

The Middle East petroleum industry was established by the 8th century, when the streets of the newly constructed Baghdad were paved with tar, derived from easily accessible petroleum from natural fields in the region. In the 9th century, oil fields were exploited in the area around modern Baku, Azerbaijan, to produce naphtha. These fields were described by the geographer Masudi in the 10th century, and by Marco Polo in the 13th century, who described the output of those wells as hundreds of shiploads. Petroleum was distilled by Persian chemist al-Razi in the 9th century, producing chemicals such as kerosene in the al-ambiq. [12] (See also: Alchemy (Islam), Islamic science, and Timeline of science and technology in the Islamic world.)

The earliest mention of American petroleum occurs in Sir Walter Raleigh's account of the Trinidad Pitch Lake in 1595; whilst thirty-seven years later, the account of a visit of a Franciscan, Joseph de la Roche d'Allion, to the oil springs of New York was published in Sagard's Histoire du Canada. A Russian traveller, Peter Kalm, in his work on America published in 1748 showed on a map the oil springs of Pennsylvania. [11]

The modern history of petroleum began in 1846 with the discovery of the process of refining kerosene from coal by Nova Scotia's Abraham Pineo Gesner.

Oil sands were mined from 1745 in Merkwiller-Pechelbronn, Alsace under the direction of Louis Pierre Ancillon de la Sablonnière, by special appointement of Louis XV. [13] The Pechelbronn oil field was active until 1970, and was the birth place of companies like Antar and Schlumberger. The first modern refinery was built there in 1857. [13]

Poland's Ignacy Łukasiewicz improved Gesner's method to develop a means of refining kerosene from the more readily available "rock oil" ("petr-oleum") seeps in 1852 and the first rock oil mine was built in Bóbrka, near Krosno in southern Poland in the following year. These discoveries rapidly spread around the world, and Meerzoeff built the first Russian refinery in the mature oil fields at Baku in 1861. At that time Baku produced about 90% of the world's oil.

Oil field in California, 1938.


The first commercial oil well drilled in North America was in Oil Springs, Ontario, Canada in 1858, dug by James Miller Williams. The US petroleum industry began with Edwin Drake's drilling of a 69 foot (21 m) oil well in 1859, on Oil Creek near Titusville, Pennsylvania, for the Seneca Oil Company (originally yielding 25 barrels a day, by the end of the year output was at the rate of 15 barrels). [11] The industry grew slowly in the 1800s, driven by the demand for kerosene and oil lamps. It became a major national concern in the early part of the 20th century; the introduction of the internal combustion engine provided a demand that has largely sustained the industry to this day. Early "local" finds like those in Pennsylvania and Ontario were quickly outpaced by demand, leading to "oil booms" in Texas, Oklahoma, and California.

Early production of crude petroleum in the United States: [11]
  • 1859:  bbl ( t)
  • 1869:  bbl ( t)
  • 1879:  bbl ( t)
  • 1889:  bbl ( t)
  • 1899:  bbl ( t)
  • 1906: 126,493,936 barrels (~21,600,000 t)
By 1910, significant oil fields had been discovered in Canada (specifically, in the province of Ontario), the Dutch East Indies (1885, in Sumatra), Iran (1908, in Masjed Soleiman), Peru, Venezuela, and Mexico, and were being developed at an industrial level.

Even until the mid-1950s, coal was still the world's foremost fuel, but oil quickly took over. Following the 1973 energy crisis and the 1979 energy crisis, there was significant media coverage of oil supply levels. This brought to light the concern that oil is a limited resource that will eventually run out, at least as an economically viable energy source. At the time, the most common and popular predictions were always quite dire, and when they did not come true, many dismissed all such discussion. The future of petroleum as a fuel remains somewhat controversial. USA Today news (2004) reports that there are 40 years of petroleum left in the ground. Some would argue that because the total amount of petroleum is finite, the dire predictions of the 1970s have merely been postponed. Others argue that technology will continue to allow for the production of cheap hydrocarbons and that the earth has vast sources of unconventional petroleum reserves in the form of tar sands, bitumen fields and oil shale that will allow for petroleum use to continue in the future, with both the Canadian tar sands and United States shale oil deposits representing potential reserves matching existing liquid petroleum deposits worldwide.

Today, about 90% of vehicular fuel needs are met by oil. Petroleum also makes up 40% of total energy consumption in the United States, but is responsible for only 2% of electricity generation. Petroleum's worth as a portable, dense energy source powering the vast majority of vehicles and as the base of many industrial chemicals makes it one of the world's most important commodities. Access to it was a major factor in several military conflicts including World War II and the Persian Gulf Wars of the late twentieth and early twenty-first centuries. The top three oil producing countries are Saudi Arabia, Russia, and the United States. About 80% of the world's readily accessible reserves are located in the Middle East, with 62.5% coming from the Arab 5: Saudi Arabia (12.5%), UAE, Iraq, Qatar and Kuwait. However, with today's oil prices, Venezuela has larger reserves than Saudi Arabia due to crude reserves derived from bitumen.

Uses

The chemical structure of petroleum is composed of hydrocarbon chains of different lengths. Because of this, petroleum may be taken to oil refineries and the hydrocarbon chemicals separated by distillation and treated by other chemical processes, to be used for a variety of purposes. See Petroleum products.

Fuels

Further information: alternative fuel
Generaly used in transportation, power plants and heating.

Petroleum vehicles are internal combustion engine vehicles.

Other derivatives

Certain types of resultant hydrocarbons may be mixed with other non-hydrocarbons, to create other end products:

Consumption statistics

Enlarge picture
Global fossil carbon emissions, an indicator of consumption, for 1800-2000. Total is black. Oil is in blue.





2004 U.S. government predictions for oil production other than in OPEC and the former Soviet Union

World energy consumption, 1980-2030. Source: International Energy Outlook 2006.


Environmental effects

Enlarge picture
Diesel fuel spill on a road


The presence of oil has significant social and environmental impacts, from accidents and routine activities such as seismic exploration, drilling, and generation of polluting wastes not produced by other alternative energies.

Extraction

Oil extraction is costly and sometimes environmentally damaging, although Dr. John Hunt of the Woods Hole Oceanographic Institution pointed out in a 1981 paper that over 70% of the reserves in the world are associated with visible macroseepages, and many oil fields are found due to natural leaks. Offshore exploration and extraction of oil disturbs the surrounding marine environment. [14] But at the same time, offshore oil platforms also form micro-habitats for marine creatures. Extraction may involve dredging, which the seabed, killing the sea plants that marine creatures need to survive.

Oil spills

Enlarge picture
Volunteers cleaning up the aftermath of the Prestige oil spill


Crude oil and refined fuel spills from tanker ship accidents have damaged natural ecosystems in Alaska, the Galapagos Islands, France and many other places and times in Spain (i.e. Ibiza).

The quantity of oil spilled during accidents has ranged from a few hundred tons to several hundred thousand tons (Atlantic Empress, Amoco Cadiz...). Smaller spills have already proven to have a great impact on ecosystems, such as the Exxon Valdez oil spill

Global warming

Main article: Global warming
Burning oil releases carbon dioxide into the atmosphere, which contributes to global warming. Per energy unit, oil produces less CO2 than coal, but more than natural gas. However, oil's unique role as a transportation fuel makes reducing its CO2 emissions a particularly thorny problem; amelioration strategies such as carbon sequestering are generally geared for large power plants, not individual vehicles.

Whales

It has been argued that the advent of kerosene was one development, which saved the great cetaceans from extinction.[15]

Alternatives to petroleum

Main article: Renewable energy

Alternatives to petroleum-based vehicle fuels



The term alternative propulsion or "alternative methods of propulsion" includes both: Nowadays, cars can be classified between the next main groups:

The future of petroleum production

Hubbert peak theory

Main article: Hubbert peak theory
The Hubbert peak theory (also known as peak oil) is a proposition which predicts that future world petroleum production must inevitably reach a peak and then decline at a similar rate to the rate of increase before the peak as these reserves are exhausted. It also suggests a method to calculate mathematically the timing of this peak, based on past production rates, past discovery rates, and proven oil reserves.

Controversy surrounds the theory for numerous reasons. Past predictions regarding the timing of the global peak have failed, causing a number of observers to disregard the theory. Further, predictions regarding the timing of the peak are highly dependent on the past production and discovery data used in the calculation.

Proponents of peak oil theory also refer as an example of their theory, that when any given oil well produces oil in similar volumes to the amount of water used to obtain the oil, it tends to produce less oil afterwards, leading to the relatively quick exhaustion and/or commercial inviability of the well in question.

The issue can be considered from the point of view of individual regions or of the world as a whole. Hubbert's prediction for when US oil production would peak turned out to be correct, and after this occurred in 1971 - causing the US to lose its excess production capacity - OPEC was finally able to manipulate oil prices, which led to the 1973 oil crisis. Since then, most other countries have also peaked: the United Kingdom's North Sea, for example in the late 1990s. China has confirmed that two of its largest producing regions are in decline, and Mexico's national oil company, Pemex, has announced that Cantarell Field, one of the world's largest offshore fields, was expected to peak in 2006, and then decline 14% per annum.

It is difficult to predict the oil peak in any given region (due to the lack of transparency in accounting of global oil reserves [16]) . Based on available production data, proponents have previously (and incorrectly) predicted the peak for the world to be in years 1989, 1995, or 1995-2000. Some of these predictions date from before the recession of the early 1980s, and the consequent reduction in global consumption, the effect of which was to delay the date of any peak by several years. A new prediction by Goldman Sachs picks 2007 for oil and some time later for natural gas. Just as the 1971 U.S. peak in oil production was only clearly recognized after the fact, a peak in world production will be difficult to discern until production clearly drops off.

Many proponents of the Hubbert peak theory expound the belief that the production peak is imminent, for various reasons. The year 2005 saw a dramatic fall in announced new oil projects coming to production from 2008 onwards - in order to avoid the peak, these new projects would have to not only make up for the depletion of current fields, but increase total production annually to meet increasing demand.

The year 2005 also saw substantial increases in oil prices due to a number of circumstances, including war and political instability. Oil prices rose to new highs. Analysts such as Kenneth Deffeyes [17] argue that these price increases indicate a general lack of spare capacity, and the price fluctuations can be interpreted as a sign that peak oil is imminent.

Pricing

International market

Main article: Petroleum Industry


Enlarge picture
Oil consumption per capita (darker colors represent more consumption).

Petroleum efficiency among countries

There are two main ways to measure the petroleum efficiency of countries: by population or by GDP (gross domestic product). This metric is important in the global debate over oil consumption/energy consumption/climate change because it takes social and economic considerations into account when scoring countries on their oil consumption/energy consumption/climate change goals. Nations such as China and India with large populations tend to promote the use of population based metrics, while nations with large economies such as the United States would tend to promote the GDP based metric.

Selected Nations Oil Efficiency (US dollar/barrel/day)
Switzerland3.75
United Kingdom3.34
Norway3.31
Austria2.96
France2.65
Germany2.89
Sweden2.71
Italy2.57
European Union2.52
DRC2.4
Japan2.34
Australia2.21
Spain1.96
Bangladesh1.93
Poland1.87
United States1.65
Belgium1.59
World1.47
Turkey1.39
Canada1.35
Mexico1.07
Ethiopia1.04
South Korea1.00
Philippines1.00
Brazil0.99
Taiwan0.98
China0.94
Nigeria0.94
Pakistan0.93
Myanmar0.89
India0.86
Russia0.84
Indonesia0.71
Vietnam0.61
Thailand0.53
Saudi Arabia0.46
Egypt0.41
Singapore0.40
Iran0.35

Selected Nations Oil Efficiency (barrel/person/year)
DRC0.13
Ethiopia0.37
Bangladesh0.57
Myanmar0.73
Pakistan1.95
Nigeria2.17
India2.18
Vietnam2.70
Philippines3.77
Indonesia4.63
China4.96
Egypt7.48
Turkey9.85
Brazil11.67
Poland11.67
World12.55
Thailand13.86
Russia17.66
Mexico18.07
Iran21.56
European Union29.70
United Kingdom30.18
Germany32.31
France32.43
Italy32.43
Austria34.01
Spain35.18
Switzerland34.64
Sweden34.68
Taiwan41.68
Japan42.01
Australia42.22
South Korea43.84
Norway52.06
Belgium61.52
United States68.81
Canada69.85
Saudi Arabia75.08
Singapore178.45


(Note: The figure for Singapore is skewed because of its small
population compared with its large oil refining capacity.
Most of this oil is sent to other countries.)

Top petroleum-producing countries

Source: Energy Statistics from the U.S. Government.

For oil reserves by country, see Oil reserves by country.



In order of amount produced in 2004 in MMbbl/d & ML/d:
# Producing Nation for 2004 (×106bbl/d) (×10³/d)
1Saudi Arabia (OPEC)10.371,649
2Russia9.271,474
3United States 18.691,382
4Iran (OPEC)4.09650
5Mexico 13.83609
6China 13.62576
7Norway 13.18506
8Canada 1,33.14499
9Venezuela (OPEC) 12.86455
10United Arab Emirates (OPEC)2.76439
11Kuwait (OPEC)2.51399
12Nigeria (OPEC)2.51399
13United Kingdom 12.08331
14Iraq (OPEC) ²2.03323
1 peak production of conventional oil already passed in this state

² Though still a member, Iraq has not been included in production figures since 1998

³ Canada has the world's second largest oil reserves when tar sands are included, and is the leading source of U.S. imports, averaging 1.7 MMbbl/d in April 2006 [1].

Top petroleum-exporting countries

Enlarge picture
Oil exports by country
In order of amount exported in 2003:
  1. Saudi Arabia (OPEC)
  2. Russia
  3. Norway 1
  4. Iran (OPEC)
  5. United Arab Emirates (OPEC)
  6. Venezuela (OPEC) 1
  7. Kuwait (OPEC)
  8. Nigeria (OPEC)
  9. Mexico 1
  10. Algeria (OPEC)
  11. Libya (OPEC) 1
1 peak production already passed in this state

Note that the USA consumes almost all of its own production, while the UK has recently become a net-importer rather than net-exporter.

Total world production/consumption (as of 2005) is approximately 84 million barrels per day.

See also: Organization of Petroleum Exporting Countries.

Top petroleum-consuming countries

# Consuming Nation (bbl/day) (m³/day)
1United States20,030,0003,184,516
2China6,391,0001,016,088
3Japan5,578,000886,831
4Russia2,800,000445,164
5Germany2,677,000425,609
6India2,320,000368,851
7Canada2,300,000365,671
8South Korea2,061,000327,673
9France2,060,000327,514
10Italy1,874,000297,942
11Saudi Arabia1,775,000282,202
12Mexico1,752,000278,546
13United Kingdom1,722,000273,776
14Brazil1,610,000255,970
Source: [https://www.cia.gov/library/publications/the-world-factbook/rankorder/2174rank.html CIA World Factbook]

Top petroleum-importing countries

Enlarge picture
Oil imports by country
# Importing Nation (bbl/day) (m³/day)
1United States13,150,0002,790,683
2Japan5,449,000866,322
3China3,226,000512,893
4Netherlands2,284,000363,127
5France2,281,000362,650
6South Korea2,263,000359,788
7Italy2,158,000343,095
8Germany2,135,000339,438
9India2,090,000332,283
10Spain1,582,000251,518
11United Kingdom1,084,000172,342
12Belgium1,042,000165,665
13Canada963,000153,105
14Turkey616,50098,016
Source: [https://www.cia.gov/library/publications/the-world-factbook/rankorder/2175rank.html CIA World Factbook]

Top petroleum non-producing and consuming countries

# Consuming Nation (bbl/day) (m³/day)
1Japan5,578,000886,831
2Germany2,677,000425,609
3India2,320,000368,851
4South Korea2,061,000327,673
5France2,060,000327,514
6Italy1,874,000297,942
7Spain1,537,000244,363
8Netherlands946,700150,513
Source : [https://www.cia.gov/library/publications/the-world-factbook/rankorder/2175rank.html CIA World Factbook]

Writers covering the petroleum industry

See also

References

1. ^ Manual of Petroleum Measurement Standards (MPMS), by the American Petroleum Institute
2. ^ IEA Key World Energy Statistics
3. ^ "Crude oil is made into different fuels"
4. ^ EIA reserves estimates
5. ^ CERA report on total world oil
6. ^ Heat of Combustion of Fuels
7. ^ Petroleum Study
8. ^ Shell Middle Distillate Synthesis Malaysia
9. ^ Sasol corporate website
10. ^
11. ^ ASTM timeline of Oil
12. ^ Dr. Kasem Ajram (1992). The Miracle of Islam Science, 2nd Edition, Knowledge House Publishers. ISBN 0-911119-43-4. 
13. ^ History of Pechelbronn oil
14. ^ Waste discharges during the offshore oil and gas activity by Stanislave Patin
15. ^ How Capitalism Saved the Whales by James S. Robbins, The Freeman, August, 1992.
16. ^ New study raises doubts about Saudi oil reserves
17. ^ Deffeyes, Kenneth (2005). Beyond Oil: The View from Hubbert;s Peak, 1st Edition, Hill and Wang. ISBN 0-8090-2957-X. 
18. ^ Kenney, J., Shnyukov, A., Krayushkin, V., Karpov, I., Kutcherov, V. and Plotnikova, I. (2001). "Dismissal of the claims of a biological connection for natural petroleum". Energia 22 (3): 26-34. 
19. ^ Brad Lemley (2003). "Anything Into Oil". Discover 24 (5). 

External links

Analysis

Articles

Data

Industry

Opinion

Pricing

Latin}}} 
Official status
Official language of: Vatican City
Used for official purposes, but not spoken in everyday speech
Regulated by: Opus Fundatum Latinitas
Roman Catholic Church
Language codes
ISO 639-1: la
ISO 639-2: lat
..... Click the link for more information.
Greek}}} 
Writing system: Greek alphabet 
Official status
Official language of:  Greece
 Cyprus
 European Union
recognised as minority language in parts of:
 European Union
 Italy
 Turkey
Regulated by:
..... Click the link for more information.
EARTH was a short-lived Japanese vocal trio which released 6 singles and 1 album between 2000 and 2001. Their greatest hit, their debut single "time after time", peaked at #13 in the Oricon singles chart.
..... Click the link for more information.
hydrocarbon is an organic compound consisting entirely of hydrogen and carbon. With relation to chemical terminology, aromatic hydrocarbons or arenes, alkanes, alkenes and alkyne-based compounds composed entirely of carbon or hydrogen are referred to as "Pure" hydrocarbons, whereas
..... Click the link for more information.
Alkanes, also known as Paraffins, are chemical compounds that consist only of the elements carbon (C) and hydrogen (H) (i.e. hydrocarbons), where each of these atoms are linked together exclusively by single bonds (i.e. they are saturated compounds) without any cyclic structure (i.
..... Click the link for more information.
gas, especially when compared to other energy sources such as electricity. Before natural gas can be used as a fuel, it must undergo extensive processing to remove almost all materials other than methane.
..... Click the link for more information.
Natural gas processing plants, or fractionators, are used to purify the raw natural gas extracted from underground gas fields and brought up to the surface by gas wells.
..... Click the link for more information.
Paraffin is a common name for a group of alkane hydrocarbons with the general formula CnH2n+2, where n is the number of carbon atoms. The simplest paraffin molecule is that of methane, CH4, a gas at room temperature.
..... Click the link for more information.
6
(strongly acidic oxide)
Electronegativity 2.58 (Pauling scale)
Ionization energies
(more) 1st: 999.6 kJmol−1
2nd: 2252 kJmol−1
3rd: 3357 kJmol−1

Atomic radius 100 pm
Atomic radius (calc.
..... Click the link for more information.
2, −1
(neutral oxide)
Electronegativity 3.44 (Pauling scale)
Ionization energies
(more) 1st: 1313.9 kJmol−1
2nd: 3388.3 kJmol−1
3rd: 5300.5 kJmol−1

Atomic radius 60 pm
Atomic radius (calc.
..... Click the link for more information.
3, 5, 4, 2
(strongly acidic oxide)
Electronegativity 3.04 (Pauling scale)
Ionization energies
(more) 1st: 1402.3 kJmol−1
2nd: 2856 kJmol−1
3rd: 4578.1 kJmol−1

Atomic radius 65 pm
Atomic radius (calc.
..... Click the link for more information.
Athabasca Oil Sands are a large deposit of oil-rich bitumen located in northern Alberta, Canada. These oil sands consist of a mixture of crude bitumen (a semi-solid form of crude oil), silica sand, clay minerals, and water.
..... Click the link for more information.
This page is currently protected from editing until disputes have been resolved.
Protection is not an endorsement of the current [ version] ([ protection log]).
..... Click the link for more information.
Bitumen is a mixture of organic liquids that are highly viscous, black, sticky, entirely soluble in carbon disulfide, and composed primarily of highly condensed polycyclic aromatic hydrocarbons.
..... Click the link for more information.
Fuel oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking, fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except
..... Click the link for more information.
Gasoline or petrol is a petroleum-derived liquid mixture consisting mostly of aliphatic hydrocarbons and enhanced with aromatic hydrocarbons toluene, benzene or iso-octane to increase octane ratings, primarily used as fuel in internal combustion engines.
..... Click the link for more information.
Gasoline or petrol is a petroleum-derived liquid mixture consisting mostly of aliphatic hydrocarbons and enhanced with aromatic hydrocarbons toluene, benzene or iso-octane to increase octane ratings, primarily used as fuel in internal combustion engines.
..... Click the link for more information.
Primary energy is energy that has not been subjected to any conversion or transformation process.

Primary energy is energy contained in raw fuels and any other forms of energy received by a system as input to the system.
..... Click the link for more information.
Liquefied petroleum gas (also called LPG, LP Gas, or autogas) is a mixture of hydrocarbon gases used as a fuel in heating appliances and vehicles, and increasingly replacing chlorofluorocarbons as an aerosol propellant and a refrigerant to reduce damage to the
..... Click the link for more information.
Energy density is the amount of energy stored in a given system or region of space per unit volume, or per unit mass, depending on the context. In some cases it is obvious from context which quantity is most useful: for example, in rocketry, energy per unit mass is the most
..... Click the link for more information.
Transport or transportation is the movement of people and goods from one place to another. The term is derived from the Latin trans ("across") and portare ("to carry").
..... Click the link for more information.
Oil reserves refer to portions of oil in place that are claimed to be recoverable under economic constraints.

Oil in the ground is not a "reserve" unless it is claimed to be economically recoverable, since as the oil is extracted, the cost of recovery increases incrementally
..... Click the link for more information.
Editing of this page by unregistered or newly registered users is currently disabled due to vandalism.
If you are prevented from editing this page, and you wish to make a change, please discuss changes on the talk page, request unprotection, log in, or .
..... Click the link for more information.
A pharmaceutical company, or drug company, is a commercial business whose focus is to research, develop, market and/or distribute drugs, most commonly in the context of healthcare. They can deal in generic and/or brand medications.
..... Click the link for more information.
A solvent is a liquid that dissolves a solid, liquid, or gaseous solute, resulting in a solution. The most common solvent in everyday life is water. Most other commonly-used solvents are organic (carbon-containing) chemicals. These are called organic solvents.
..... Click the link for more information.
Fertilizers (also spelled fertilisers) are compounds given to plants to promote growth; they are usually applied either via the soil, for uptake by plant roots, or by foliar feeding, for uptake through leaves.
..... Click the link for more information.
worldwide view.
A pesticide is a substance or mixture of substances used for preventing, controlling, or lessening the damage caused by a pest.[1] A pesticide may be a chemical substance, biological agent (such as a virus or bacteria), antimicrobial,
..... Click the link for more information.
Plastic is the general term for a wide range of synthetic or semisynthetic polymerization products. They are composed of organic condensation or addition polymers and may contain other substances to improve performance or economics.
..... Click the link for more information.
Porosity is a measure of the void spaces in a material, and is measured as a fraction, between 0–1, or as a percentage between 0–100%. The term porosity is used in multiple fields including manufacturing, earth sciences and construction.
..... Click the link for more information.


Rock formations as used in this article refers to isolated, scenic, or spectacular surface rock outcrops. These are usually the result of weathering and erosion sculpting the existing rock.
..... Click the link for more information.


This article is copied from an article on Wikipedia.org - the free encyclopedia created and edited by online user community. The text was not checked or edited by anyone on our staff. Although the vast majority of the wikipedia encyclopedia articles provide accurate and timely information please do not assume the accuracy of any particular article. This article is distributed under the terms of GNU Free Documentation License.
Herod_Archelaus


page counter