Information about Inertial Guidance
An inertial-navigation system is a navigation aid that uses a computer and motion sensors to continuously track the position, orientation, and velocity (direction and speed of movement) of a vehicle without the need for external references. Other terms used to refer to inertial navigation systems or closely related devices include inertial guidance system, inertial reference platform, and many other variations.
An INS can detect a change in its geographic position (a move east or north, for example), a change in its velocity (speed and direction of movement), and a change in its orientation (rotation about an axis). It does this by measuring the linear and angular accelerations applied to the system. Since it requires no external reference (after initialization), it is immune to jamming and deception.
Inertial-navigation systems are used in many different types of vehicles, including aircraft, submarines, spacecraft, and guided missiles. Their cost and complexity does place constraints on the environments in which they are practical for use, however.
Gyroscopes measure the angular velocity of the system in the inertial reference frame. By using the original orientation of the system in the inertial reference frame as the initial condition and integrating the angular velocity, the system's current orientation is known at all times. This can be thought of as the ability of a blindfolded passenger in a car to feel the car turn left and right or tilt up and down as the car ascends or descends hills. Based on this information alone, he knows what direction the car is facing but not how fast or slow it is moving, or whether it is sliding sideways.
Accelerometers measure the linear acceleration of the system in the inertial reference frame, but in directions that can only be measured relative to the moving system (since the accelerometers are fixed to the system and rotate with the system, but are not aware of their own orientation). This can be thought of as the ability of a blindfolded passenger in a car to feel himself pressed back into his seat as the vehicle accelerates forward or pulled forward as it slows down; and feel himself pressed down into his seat as the vehicle accelerates up a hill or rise up out of his seat as the car passes over the crest of a hill and begins to descend. Based on this information alone, he knows how the vehicle is moving relative to itself, that is, whether it is going forward, backward, left, right, up (toward the car's ceiling), or down (toward the car's floor) measured relative to the car, but not the direction relative to the Earth, since he did not know what direction the car was facing relative to the Earth when he felt the accelerations.
However, by tracking both the current angular velocity of the system and the current linear acceleration of the system measured relative to the moving system, it is possible to determine the linear acceleration of the system in the inertial reference frame. Performing integration on the inertial accelerations (using the original velocity as the initial conditions) using the correct kinematic equations yields the inertial velocities of the system, and integration again (using the original position as the initial condition) yields the inertial position. In our example, if the blindfolded passenger knew how the car was pointed and what its velocity was before he was blindfolded, and he is able to keep track of both how the car has turned and how it has accelerated and decelerated since, he can accurately know the current orientation, position, and velocity of the car at any time.
All inertial navigation systems suffer from integration drift: Small errors in the measurement of acceleration and angular velocity are integrated into progressively larger errors in velocity, which is compounded into still greater errors in position. This is a problem that is inherent in every open loop control system. The inaccuracy of a good-quality navigational system is normally less than 0.6 nautical miles per hour in position and on the order of tenths of a degree per hour in orientation.
Inertial navigation may also be used to supplement other navigation systems, providing a higher degree of accuracy than is possible with the use of any single navigation system. For example, if, in terrestrial use, the inertially tracked velocity is intermittently updated to zero by stopping, the position will remain precise for a much longer time, a so-called zero velocity update.
Control theory in general and Kalman filtering in particular provide a theoretical framework for combining information from various sensors. One of the most common alternative sensors is a satellite navigation radio, such as GPS. By properly combining the information from an INS and the GPS system, the errors in position and velocity are stableGPS/INS.
INSs have angular and linear accelerometers (for changes in position); some include a gyroscopic element (for maintaining an absolute angular reference).
Angular accelerometers measure how the vehicle is rotating in space. Generally, there's at least one sensor for each of the three axes: pitch (nose up and down), yaw (nose left and right) and roll (clockwise or counter-clockwise from the cockpit).
Linear accelerometers measure how the vehicle is moving in space. Since it can move in three axes (up & down, left & right, forward & back), there is a linear accelerometer for each axis.
A computer continually calculates the vehicle's current position. First, for each of the six degrees of freedom (x,y,z and θ x, θ y and θ z), it integrates the sensed amount of acceleration over time to figure the current velocity. Then it integrates the velocity to figure the current position.
Inertial guidance is difficult without computers. The desire to use inertial guidance in the Minuteman missile and Project Apollo drove early attempts to miniaturize computers.
Inertial guidance systems are now usually combined with satellite navigation systems through a digital filtering system. The inertial system provides short term data, while the satellite system corrects accumulated errors of the inertial system.
An inertial guidance system that will operate near the surface of the earth must incorporate Schuler tuning so that its platform will continue pointing towards the center of the earth as a vehicle moves from place to place.
Two gyroscopes are used to cancel gyroscopic precession, the tendency of a gyroscope to twist at right angles to an input force. By mounting a pair of gyroscopes (of the same rotational inertia and spinning at the same speed) at right angles the precessions are cancelled, and the platform will resist twisting.
This system allows a vehicle's roll, pitch, and yaw angles to be measured directly at the bearings of the gimbals. Relatively simple electronic circuits can be used to add up the linear accelerations, because the directions of the linear accelerometers do not change.
The big disadvantage of this scheme is that it uses many expensive precision mechanical parts. It also has moving parts that can wear out or jam, and is vulnerable to gimbal lock. The primary guidance system of the Apollo spacecraft used a three-axis gyrostabilized platform, feeding data to the Apollo Guidance Computer. Maneuvers had to be carefully planned to avoid gimbal lock.
The fluid bearings are pads with holes through which pressurized inert gas (such as Helium) or oil press against the spherical shell of the platform. The fluid bearings are very slippery, and the spherical platform can turn freely. There are usually four bearing pads, mounted in a tetrahedral arrangement to support the platform.
In premium systems, the angular sensors are usually specialized transformer coils made in a strip on a flexible printed circuit board. Several coil strips are mounted on great circles around the spherical shell of the gyrostabilized platform. Electronics outside the platform uses similar strip-shaped transformers to read the varying magnetic fields produced by the transformers wrapped around the spherical platform. Whenever a magnetic field changes shape, or moves, it will cut the wires of the coils on the external transformer strips. The cutting generates an electric current in the external strip-shaped coils, and electronics can measure that current to derive angles.
Cheap systems sometimes use bar codes to sense orientations, and use solar cells or a single transformer to power the platform. Some small missiles have powered the platform with light from a window or optic fibers to the motor. A research topic is to suspend the platform with pressure from exhaust gases. Data is returned to the outside world via the transformers, or sometimes LEDs communicating with external photodiodes.
A strapdown system has a dynamic measurement range several hundred times that required by a gimbaled system. That is, it must integrate the vehicle's attitude changes in pitch, roll and yaw, as well as gross movements. Gimballed systems could usually do well with update rates of 50 to 60 updates per second. However, strapdown systems normally update about 2000 times per second. The higher rate is needed to keep the maximum angular measurement within a practical range for real rate gyros: about 4 milliradians. Most rate gyros are now laser interferometers.
The data updating algorithms ("direction cosines" or "quaternions") involved are too complex to be accurately performed except by digital electronics. However, digital computers are now so inexpensive and fast that rate gyro systems can now be practically used and mass-produced. The Apollo lunar module used a strapdown system in its backup Abort Guidance System (AGS).
Align In Motion allows initialization of a Strapdown Inertial Navigation System while an aircraft is moving, in the air or on the ground. This is accomplished using Civilian grade GPS and an inertial reasonableness test, thereby allowing commercial data integrity requirements to be met. Align In Motion has been FAA certified to recover pure INS performance equivalent to stationary align procedures for civilian flight times up to 18 hours.
This Align In Motion capability allows the removal of dedicated backup batteries on aircraft resulting in weight, cost, and reliability improvements. Align In Motion also has benefits for aircraft operations on the ground, on board ship, and in the air such as reduced turn backs, quicker dispatch, and world-wide alignment including polar regions.
A laser gyro splits a beam of laser light into two beams in opposite directions through narrow tunnels in a closed optical circular path around the perimeter of a triangular block of temperature stable cervit glass block with reflecting mirrors placed in each corner. When the gyro is rotating at some angular rate, the distance traveled by each beam becomes different - the shorter path being opposite to the rotation. The phase-shift between the two beams can be measured by an interferometer, and is proportional to the rate of rotation (Sagnac effect).
In practice, at low rotation rates the output frequency can drop to zero after the result of "Back scattering" causing the beams to synchronise and lock together. This is known as a "lock-in, or laser-lock." The result is that there is no change in the interference pattern, and therefore no measurement change.
To unlock the counter-rotating light beams, laser gyros either have independent light paths for the two directions (usually in fiber optic gyros), or the laser gyro is mounted on a piezo-electric dither motor that rapidly vibrates the laser ring back and forth about its input axis through the lock-in region to decouple the light waves.
Alas, the shaker is the most accurate, because both light beams use exactly the same path. Thus laser gyros retain moving parts, but they do not move as far.
This system has almost no moving parts, and is very accurate. However it is still relatively expensive due to the cost of the precision ground and polished hollow quartz spheres.
Although successful systems were constructed, and an HRG's kinematics appear capable of greater accuracy, they never really caught on. Laser gyros were just more popular.
The classic system is the Delco 130Y Hemispherical Resonator Gyro, developed about 1986. See also for a picture of an HRG resonator.
As the forks are twisted about the axis of the handle, the vibration of the tines tends to continue in the same plane of motion. This motion has to be resisted by electrostatic forces from the electrodes under the tines. By measuring the difference in capacitance between the two tines of a fork, the system can determine the rate of angular motion.
Current state of the art non-military technology (2005) can build small solid state sensors that can measure human body movements. These devices have no moving parts, and weigh about 50 grams.
Solid state devices using the same physical principles are used to stabilize images taken with small cameras or camcorders. These can be extremely small (≈5 mm) and are built with MEMS (Microelectromechanical Systems) technologies.
The basic, open-loop accelerometer consists of a mass attached to a spring. The mass is constrained to move only in-line with the spring. Acceleration causes deflection of the mass and the offset distance is measured. The acceleration is derived from the values of deflection distance, mass, and the spring constant. The system must also be damped to avoid oscillation.
A closed-loop accelerometer achieves higher performance by using a feedback loop to cancel the deflection, thus keeping the mass nearly stationary. Whenever the mass deflects, the feedback loop causes an electric coil to apply an equally negative force on the mass, cancelling the motion. Acceleration is derived from the amount of negative force applied. Because the mass barely moves, the non-linearities of the spring and damping system are greatly reduced. In addition, this accelerometer provides for increased bandwidth past the natural frequency of the sensing element.
Both types of accelerometers have been manufactured as integrated micromachinery on silicon chips.
Guided Missile is a London based independent record label set up by Paul Kearney in 1994.
Guided Missile has always focused on 'the underground', preferring to put out a steady flow of considered and quality releases
..... Click the link for more information.
..... Click the link for more information.
Control theory is an interdisciplinary branch of engineering and mathematics, that deals with the behavior of dynamical systems. The desired output of a system is called the reference.
..... Click the link for more information.
Guided Missile is a London based independent record label set up by Paul Kearney in 1994.
Guided Missile has always focused on 'the underground', preferring to put out a steady flow of considered and quality releases
..... Click the link for more information.
Overview
An inertial navigation system includes at least a computer and a platform or module containing accelerometers, gyroscopes, or other motion-sensing devices. The INS is initially provided with its position and velocity from another source (a human operator, a GPS satellite receiver, etc.), and thereafter computes its own updated position and velocity by integrating information received from the motion sensors. The advantage of an INS is that it requires no external references in order to determine its position, orientation, or velocity once it has been initialized.An INS can detect a change in its geographic position (a move east or north, for example), a change in its velocity (speed and direction of movement), and a change in its orientation (rotation about an axis). It does this by measuring the linear and angular accelerations applied to the system. Since it requires no external reference (after initialization), it is immune to jamming and deception.
Inertial-navigation systems are used in many different types of vehicles, including aircraft, submarines, spacecraft, and guided missiles. Their cost and complexity does place constraints on the environments in which they are practical for use, however.
Gyroscopes measure the angular velocity of the system in the inertial reference frame. By using the original orientation of the system in the inertial reference frame as the initial condition and integrating the angular velocity, the system's current orientation is known at all times. This can be thought of as the ability of a blindfolded passenger in a car to feel the car turn left and right or tilt up and down as the car ascends or descends hills. Based on this information alone, he knows what direction the car is facing but not how fast or slow it is moving, or whether it is sliding sideways.
Accelerometers measure the linear acceleration of the system in the inertial reference frame, but in directions that can only be measured relative to the moving system (since the accelerometers are fixed to the system and rotate with the system, but are not aware of their own orientation). This can be thought of as the ability of a blindfolded passenger in a car to feel himself pressed back into his seat as the vehicle accelerates forward or pulled forward as it slows down; and feel himself pressed down into his seat as the vehicle accelerates up a hill or rise up out of his seat as the car passes over the crest of a hill and begins to descend. Based on this information alone, he knows how the vehicle is moving relative to itself, that is, whether it is going forward, backward, left, right, up (toward the car's ceiling), or down (toward the car's floor) measured relative to the car, but not the direction relative to the Earth, since he did not know what direction the car was facing relative to the Earth when he felt the accelerations.
However, by tracking both the current angular velocity of the system and the current linear acceleration of the system measured relative to the moving system, it is possible to determine the linear acceleration of the system in the inertial reference frame. Performing integration on the inertial accelerations (using the original velocity as the initial conditions) using the correct kinematic equations yields the inertial velocities of the system, and integration again (using the original position as the initial condition) yields the inertial position. In our example, if the blindfolded passenger knew how the car was pointed and what its velocity was before he was blindfolded, and he is able to keep track of both how the car has turned and how it has accelerated and decelerated since, he can accurately know the current orientation, position, and velocity of the car at any time.
All inertial navigation systems suffer from integration drift: Small errors in the measurement of acceleration and angular velocity are integrated into progressively larger errors in velocity, which is compounded into still greater errors in position. This is a problem that is inherent in every open loop control system. The inaccuracy of a good-quality navigational system is normally less than 0.6 nautical miles per hour in position and on the order of tenths of a degree per hour in orientation.
Inertial navigation may also be used to supplement other navigation systems, providing a higher degree of accuracy than is possible with the use of any single navigation system. For example, if, in terrestrial use, the inertially tracked velocity is intermittently updated to zero by stopping, the position will remain precise for a much longer time, a so-called zero velocity update.
Control theory in general and Kalman filtering in particular provide a theoretical framework for combining information from various sensors. One of the most common alternative sensors is a satellite navigation radio, such as GPS. By properly combining the information from an INS and the GPS system, the errors in position and velocity are stableGPS/INS.
History
Inertial navigation systems were originally developed for rockets. American rocket pioneer Robert Goddard experimented with rudimentary gyroscopic systems. Dr. Goddard's systems were of great interest to contemporary German pioneers including Wernher von Braun. The systems entered more widespread use with the advent of spacecraft, guided missiles, and commercial airliners.Inertial navigation systems in detail
)
INSs have angular and linear accelerometers (for changes in position); some include a gyroscopic element (for maintaining an absolute angular reference).
Angular accelerometers measure how the vehicle is rotating in space. Generally, there's at least one sensor for each of the three axes: pitch (nose up and down), yaw (nose left and right) and roll (clockwise or counter-clockwise from the cockpit).
Linear accelerometers measure how the vehicle is moving in space. Since it can move in three axes (up & down, left & right, forward & back), there is a linear accelerometer for each axis.
A computer continually calculates the vehicle's current position. First, for each of the six degrees of freedom (x,y,z and θ x, θ y and θ z), it integrates the sensed amount of acceleration over time to figure the current velocity. Then it integrates the velocity to figure the current position.
Inertial guidance is difficult without computers. The desire to use inertial guidance in the Minuteman missile and Project Apollo drove early attempts to miniaturize computers.
Inertial guidance systems are now usually combined with satellite navigation systems through a digital filtering system. The inertial system provides short term data, while the satellite system corrects accumulated errors of the inertial system.
An inertial guidance system that will operate near the surface of the earth must incorporate Schuler tuning so that its platform will continue pointing towards the center of the earth as a vehicle moves from place to place.
Basic schemes
Gimbaled Gyrostabilized platforms
Some systems place the linear accelerometers on a gimbaled gyrostabilized platform. The gimbals are a set of three rings, each with a pair of bearings initially at right angles. They let the platform twist about any rotational axis (or, rather, they let the platform keep the same orientation while the vehicle rotates around it). There are two gyroscopes (usually) on the platform.Two gyroscopes are used to cancel gyroscopic precession, the tendency of a gyroscope to twist at right angles to an input force. By mounting a pair of gyroscopes (of the same rotational inertia and spinning at the same speed) at right angles the precessions are cancelled, and the platform will resist twisting.
This system allows a vehicle's roll, pitch, and yaw angles to be measured directly at the bearings of the gimbals. Relatively simple electronic circuits can be used to add up the linear accelerations, because the directions of the linear accelerometers do not change.
The big disadvantage of this scheme is that it uses many expensive precision mechanical parts. It also has moving parts that can wear out or jam, and is vulnerable to gimbal lock. The primary guidance system of the Apollo spacecraft used a three-axis gyrostabilized platform, feeding data to the Apollo Guidance Computer. Maneuvers had to be carefully planned to avoid gimbal lock.
Fluidically Suspended Gyrostabilized Platforms
Gimbal lock constrains maneuvring, and it would be beneficial to eliminate the slip rings and bearings of the gimbals. Therefore, some systems use fluid bearings or a flotation chamber to mount a gyrostabilized platform. These systems can have very high precisions. Like all gyrostabilized platforms, this system runs well with relatively slow, low-power computers.The fluid bearings are pads with holes through which pressurized inert gas (such as Helium) or oil press against the spherical shell of the platform. The fluid bearings are very slippery, and the spherical platform can turn freely. There are usually four bearing pads, mounted in a tetrahedral arrangement to support the platform.
In premium systems, the angular sensors are usually specialized transformer coils made in a strip on a flexible printed circuit board. Several coil strips are mounted on great circles around the spherical shell of the gyrostabilized platform. Electronics outside the platform uses similar strip-shaped transformers to read the varying magnetic fields produced by the transformers wrapped around the spherical platform. Whenever a magnetic field changes shape, or moves, it will cut the wires of the coils on the external transformer strips. The cutting generates an electric current in the external strip-shaped coils, and electronics can measure that current to derive angles.
Cheap systems sometimes use bar codes to sense orientations, and use solar cells or a single transformer to power the platform. Some small missiles have powered the platform with light from a window or optic fibers to the motor. A research topic is to suspend the platform with pressure from exhaust gases. Data is returned to the outside world via the transformers, or sometimes LEDs communicating with external photodiodes.
Strapdown systems
Lightweight digital computers permit the system to eliminate the gimbals, creating "strapdown" systems, so called because their sensors are simply strapped to the vehicle. This reduces the cost, eliminates gimbal lock, removes the need for some calibrations, and increases the reliability by eliminating some of the moving parts. Angular rate sensors called "rate gyros" measure how the angular velocity of the vehicle changes.A strapdown system has a dynamic measurement range several hundred times that required by a gimbaled system. That is, it must integrate the vehicle's attitude changes in pitch, roll and yaw, as well as gross movements. Gimballed systems could usually do well with update rates of 50 to 60 updates per second. However, strapdown systems normally update about 2000 times per second. The higher rate is needed to keep the maximum angular measurement within a practical range for real rate gyros: about 4 milliradians. Most rate gyros are now laser interferometers.
The data updating algorithms ("direction cosines" or "quaternions") involved are too complex to be accurately performed except by digital electronics. However, digital computers are now so inexpensive and fast that rate gyro systems can now be practically used and mass-produced. The Apollo lunar module used a strapdown system in its backup Abort Guidance System (AGS).
GPS Align in Motion
Honeywell has developed a new initialization process called Align in Motion. Strapdown inertial navigation systems require an initialization process that establishes the relationship between the aircraft body frame and the local geographic reference. This process, called alignment, generally requires the device to remain stationary for some period of time in order to establish this initial state. This paperhttp://www.honeywell.com/sites/servlet/com.merx.npoint.servlets.DocumentServlet?docid=D1A8786B5-5658-438B-AB93-7B37E787F29A describes an alignment process where the initialization occurs while the device is moving. This is possible because an accurate determination of the aircraft motion is available based on measurements obtained from GPS.Align In Motion allows initialization of a Strapdown Inertial Navigation System while an aircraft is moving, in the air or on the ground. This is accomplished using Civilian grade GPS and an inertial reasonableness test, thereby allowing commercial data integrity requirements to be met. Align In Motion has been FAA certified to recover pure INS performance equivalent to stationary align procedures for civilian flight times up to 18 hours.
This Align In Motion capability allows the removal of dedicated backup batteries on aircraft resulting in weight, cost, and reliability improvements. Align In Motion also has benefits for aircraft operations on the ground, on board ship, and in the air such as reduced turn backs, quicker dispatch, and world-wide alignment including polar regions.
Types of sensors
Laser gyros
Laser gyroscopes were supposed to eliminate the bearings in the gyroscopes, and thus the last bastion of precision machining and moving parts.A laser gyro splits a beam of laser light into two beams in opposite directions through narrow tunnels in a closed optical circular path around the perimeter of a triangular block of temperature stable cervit glass block with reflecting mirrors placed in each corner. When the gyro is rotating at some angular rate, the distance traveled by each beam becomes different - the shorter path being opposite to the rotation. The phase-shift between the two beams can be measured by an interferometer, and is proportional to the rate of rotation (Sagnac effect).
In practice, at low rotation rates the output frequency can drop to zero after the result of "Back scattering" causing the beams to synchronise and lock together. This is known as a "lock-in, or laser-lock." The result is that there is no change in the interference pattern, and therefore no measurement change.
To unlock the counter-rotating light beams, laser gyros either have independent light paths for the two directions (usually in fiber optic gyros), or the laser gyro is mounted on a piezo-electric dither motor that rapidly vibrates the laser ring back and forth about its input axis through the lock-in region to decouple the light waves.
Alas, the shaker is the most accurate, because both light beams use exactly the same path. Thus laser gyros retain moving parts, but they do not move as far.
Vibrating gyros
Less-expensive navigation systems, intended for use in automobiles, may use a Vibrating structure gyroscope to detect changes in heading, and the odometer pickup to measure distance covered along the vehicle's track. This type of system is much less accurate than a higher-end INS, but it is adequate for the typical automobile application where GPS is the primary navigation system, and dead reckoning is only needed to fill gaps in GPS coverage when buildings or terrain block the satellite signals.Hemispherical Resonator Gyros ("Brandy Snifter Gyros")
If a standing wave is induced in a globular brandy snifter, and then the snifter is tilted, the waves tend to continue in the same plane of movement. They don't fully tilt with the snifter. This trick is used to measure angles. Instead of brandy snifters, the system uses hollow globes machined from piezoelectric materials such as quartz. The electrodes to start and sense the waves are evaporated directly onto the quartz.This system has almost no moving parts, and is very accurate. However it is still relatively expensive due to the cost of the precision ground and polished hollow quartz spheres.
Although successful systems were constructed, and an HRG's kinematics appear capable of greater accuracy, they never really caught on. Laser gyros were just more popular.
The classic system is the Delco 130Y Hemispherical Resonator Gyro, developed about 1986. See also for a picture of an HRG resonator.
Quartz rate sensors
This system is usually integrated on a silicon chip. It has two mass-balanced quartz tuning forks, arranged "handle-to-handle" so forces cancel. Aluminum electrodes evaporated onto the forks and the underlying chip both drive and sense the motion. The system is both manufacturable and inexpensive. Since quartz is dimensionally stable, the system can be accurate.As the forks are twisted about the axis of the handle, the vibration of the tines tends to continue in the same plane of motion. This motion has to be resisted by electrostatic forces from the electrodes under the tines. By measuring the difference in capacitance between the two tines of a fork, the system can determine the rate of angular motion.
Current state of the art non-military technology (2005) can build small solid state sensors that can measure human body movements. These devices have no moving parts, and weigh about 50 grams.
Solid state devices using the same physical principles are used to stabilize images taken with small cameras or camcorders. These can be extremely small (≈5 mm) and are built with MEMS (Microelectromechanical Systems) technologies.
MHD sensor
Sensors based on magnetohydrodynamic principles can be used to measure angular velocities and are described in "MHD sensor".Pendular accelerometers
)
Principle of open loop accelerometer. Acceleration in the upward direction causes the mass to deflect downward.
Both types of accelerometers have been manufactured as integrated micromachinery on silicon chips.
See also
- Inertial measurement unit
- Aircraft
- Spacecraft
- Attitude control
- Kalman filter
- Schuler tuning
- SIGI
- Dead reckoning
External links
- Inertial Instruments- Where to Now? a survey from Draper Lab; describes the precision needed for various applications, as well as common technologies. (.pdf format)
- A history of inertial navigation systems (.pdf format)
- Principle of Operation of an Accelerometer (.pdf format)
- GPS Align in Motion of Civilian Strapdown INS
Manufacturers
- Crossbow Technology Inc., USA
- Applanix - A Trimble Company, Canada
- Dewetron, Austria
- Deutsche Montan Technologie GmbH, Germany
- Flexit, Sweden borehole positioning systems.
- Honeywell Inc., USA
- IGI, Germany
- iMAR Navigation GmbH, Germany European solutions for global industrial and defence applications with all kinds of inertial sensor technology
- InterSense, USA Miniature Inertial Sensors and Hybrid Tracking Systems.
- iXSea, France
- Kearfott Guidance & Navigation Corporation, USA
- Kongsberg Maritime, Norway
- Northrop Grumman Italia, Italy (a division of Northrop Grumman, USA)
- Litef, Germany (a division of Northrop Grumman, USA)
- Sperry Marine (a division of Northrop Grumman, USA)
- Microbotics Inc, USA GPS Aided INS
- nec-tokin, japan miniature ceramic sensors
- Northrop Grumman, USA, see especially
- Sagem, France
- SEG, Germany
- Systron Donner Inertial, USA (a company of Schneider Electric)
- Verhaert, Belgium
- Xsens, The Netherlands miniature solid state sensors
- Xsens, The Netherlands miniature solid state sensors
- TUBITAK - SAGE, Turkey Integrated Inertial Navigation Systems
- Invensense silicon chip sensors
Navigation is the process of planning, recording, and controlling the movement of a craft or vehicle from one place to another.[1] The word navigate is derived from the Latin roots navis meaning "ship" and agere meaning "to move" or "to direct.
..... Click the link for more information.
..... Click the link for more information.
computer is a machine which manipulates data according to a list of instructions.
Computers take numerous physical forms. The first devices that resemble modern computers date to the mid-20th century (around 1940 - 1941), although the computer concept and various machines
..... Click the link for more information.
Computers take numerous physical forms. The first devices that resemble modern computers date to the mid-20th century (around 1940 - 1941), although the computer concept and various machines
..... Click the link for more information.
velocity is defined as the rate of change of position. It is a vector physical quantity, both speed and direction are required to define it. In the SI (metric) system, it is measured in meters per second (m/s). The scalar absolute value (magnitude) of velocity is speed.
..... Click the link for more information.
..... Click the link for more information.
accelerometer is a measuring device for specific external force. Specific external force is the sum total of external forces acting on an object divided by the mass. Accelerometers do not measure internal forces such as gravity.
..... Click the link for more information.
..... Click the link for more information.
A gyroscope is a device for measuring or maintaining orientation, based on the principle of conservation of angular momentum. The device is a spinning wheel whose axle is free to take any orientation.
..... Click the link for more information.
..... Click the link for more information.
acceleration is defined as the rate of change of velocity, or, equivalently, as the second derivative of position. It is thus a vector quantity with dimension length/time². In SI units, acceleration is measured in metres/second² (m·s-²).
..... Click the link for more information.
..... Click the link for more information.
Jamming may mean:
..... Click the link for more information.
- Techniques to limit the effectiveness of an opponent's communications and/or detection equipment.
- *Radio jamming
- *Radar jamming
- *Cell phone jammer
..... Click the link for more information.
aircraft is a vehicle which is able to fly through the air (or through any other atmosphere). All the human activity which surrounds aircraft is called aviation. (Most rocket vehicles are not aircraft because they are not supported by the surrounding air).
..... Click the link for more information.
..... Click the link for more information.
submarine is a watercraft that can operate underwater. Military submarines were first widely used in World War I and are used by all major navies today. Civilian submarines and submersibles are used for scientific work at depths too great for human divers.
..... Click the link for more information.
..... Click the link for more information.
spacecraft is a vehicle or device designed for spaceflight. On a sub-orbital spaceflight, a spacecraft enters outer space but then returns to the planetary surface (such as Earth) without making a complete orbit.
..... Click the link for more information.
..... Click the link for more information.
For the weapon, see .
Guided Missile is a London based independent record label set up by Paul Kearney in 1994.
Guided Missile has always focused on 'the underground', preferring to put out a steady flow of considered and quality releases
..... Click the link for more information.
angular velocity is a vector quantity (more precisely, a pseudovector) which specifies the angular speed at which an object is rotating along with the direction in which it is rotating.
..... Click the link for more information.
..... Click the link for more information.
An inertial frame of reference, or inertial reference frame, is one in which Newton's first and second laws of motion are valid. Newton's laws are valid in any reference frame that is neither rotating nor accelerating relative to the sun and other stars.
..... Click the link for more information.
..... Click the link for more information.
In mathematics, in the field of differential equations, an initial value problem is an ordinary differential equation together with specified value, called the initial condition, of the unknown function at a given point in the domain of the solution.
..... Click the link for more information.
..... Click the link for more information.
INTErnational Gamma-Ray Astrophysics Laboratory (INTEGRAL) is detecting some of the most energetic radiation that comes from space. It is the most sensitive gamma ray observatory ever launched.
..... Click the link for more information.
..... Click the link for more information.
An open-loop controller, also called a non-feedback controller, is a type of controller which computes its input into a system using only the current state and its model of the system.
..... Click the link for more information.
..... Click the link for more information.
1 nautical mile =
SI units
0 m 0 km
US customary / Imperial units
0 ft 0 mi
A nautical mile or sea mile is a unit of length.SI units
0 m 0 km
US customary / Imperial units
0 ft 0 mi
..... Click the link for more information.
For control theory in psychology and sociology, see .
Control theory is an interdisciplinary branch of engineering and mathematics, that deals with the behavior of dynamical systems. The desired output of a system is called the reference.
..... Click the link for more information.
The Kalman filter is an efficient recursive filter that estimates the state of a dynamic system from a series of incomplete and noisy measurements. It was developed by Rudolf Kalman.
..... Click the link for more information.
..... Click the link for more information.
Global Navigation Satellite System (GNSS) is the standard generic term for satellite navigation systems that provide autonomous geo-spatial positioning with global coverage.
..... Click the link for more information.
..... Click the link for more information.
Global Positioning System (GPS) is the only fully functional Global Navigation Satellite System (GNSS). Utilizing a constellation of at least 24 medium Earth orbit satellites that transmit precise microwave signals, the system enables a GPS receiver to determine its
..... Click the link for more information.
..... Click the link for more information.
In the mathematical subfield of numerical analysis, numerical stability is a desirable property of numerical algorithms. The precise definition of stability depends on the context, but it is related to the accuracy of the algorithm.
..... Click the link for more information.
..... Click the link for more information.
GPS/INS refers to the use of GPS satellite signals to correct or calibrate a solution from an Inertial Navigation System. Inertial navigation systems usually can only provide an accurate solution for a short period of time.
..... Click the link for more information.
..... Click the link for more information.
rocket is a vehicle, missile or aircraft which obtains thrust by the reaction to the ejection of fast moving fluid from within a rocket engine.
The history of rockets goes back to at least the 13th century[1].
..... Click the link for more information.
The history of rockets goes back to at least the 13th century[1].
..... Click the link for more information.
Robert Hutchings Goddard, Ph.D. (October 5, 1882 – August 10, 1945), U.S. professor and scientist, was a pioneer of controlled, liquid-fueled rocketry. He launched the world's first liquid-fueled rocket on March 16, 1926.
..... Click the link for more information.
..... Click the link for more information.
A gyroscope is a device for measuring or maintaining orientation, based on the principle of conservation of angular momentum. The device is a spinning wheel whose axle is free to take any orientation.
..... Click the link for more information.
..... Click the link for more information.
Wernher Magnus Maximilian Freiherr[1] von Braun (March 23 1912 – June 16 1977) was one of the leading figures in the development of rocket technology in Germany and the United States.
..... Click the link for more information.
..... Click the link for more information.
spacecraft is a vehicle or device designed for spaceflight. On a sub-orbital spaceflight, a spacecraft enters outer space but then returns to the planetary surface (such as Earth) without making a complete orbit.
..... Click the link for more information.
..... Click the link for more information.
For the weapon, see .
Guided Missile is a London based independent record label set up by Paul Kearney in 1994.
Guided Missile has always focused on 'the underground', preferring to put out a steady flow of considered and quality releases
..... Click the link for more information.
airliner is a large fixed-wing aircraft with the primary function of transporting paying passengers. Such aircraft are usually operated by an airline which owns or leases the aircraft.
..... Click the link for more information.
..... Click the link for more information.
This article is copied from an article on Wikipedia.org - the free encyclopedia created and edited by online user community. The text was not checked or edited by anyone on our staff. Although the vast majority of the wikipedia encyclopedia articles provide accurate and timely information please do not assume the accuracy of any particular article. This article is distributed under the terms of GNU Free Documentation License.
Herod_Archelaus
