Information about Ceramic Tile
A tile is a manufactured piece of hard-wearing material such as ceramic, stone, metal or even glass. Tiles are generally used for covering roofs, floors, and walls, or other objects such as tabletops. Another category are the ceiling tiles, made from lightweight materials such as perlite, wood, and mineral wool. The word is derived from the French word tuile, which is, in turn, from the Latin word tegula, meaning a roof tile composed of baked clay. Less precisely, the modern term can refer to any sort of construction tile or similar object, such as rectangular counters used in playing games (see tile-based game).
Tiles are often used to form wall and floor coverings, and can range from simple square tiles to complex mosaics. Tiles are most often made from ceramic, with a hard glaze finish, but other materials are also commonly used, such as glass, marble, granite, slate, and reformed ceramic slurry, which is cast in a mould and fired.
In the past twenty years, the technology surrounding porcelain tile and glass tiles has become more efficient, allowing more mass production. Similarly, the invention of automated tile lines that use diamonds to cut and finish stone slabs into tiles has made stone tiles more available. This has allowed these tiles to move from being niche items into broader markets. The DSAN U.S. Ceramic Tile Demand Index has shown a growth of 5.5% annually for the 2000-2005 period. The DSAN World Demand for (finished) Granite Index has shown a growth of 14% annually for the 2000-2005 period, The DSAN World Demand for (finished) Marble Index has shown a growth of 10.5% annually for the 2000-2005 period. The U.S. market for ceramic tile is over $3 billion.
Accompanying the growth in tile demand has been some shifts in the world ceramic tile industry. In 1990, Europe accounted for 54% of world ceramic tile production. By 2002, Europe was down to 25% of world ceramic tile production. In 2005, world ceramic tile production was about 7 billion sq. meters, of which China produced 35%, and Spain, Italy, and Brazil shared the next 25%, with their productions spaced neck and neck. Except for Spain, European ceramic tile production in the same period has dropped a little absolutely. Asia now has state-of-the-art equipment in its ceramic tile plants, which means much lower costs. The Europeans still do well with higher-priced ceramic tile with sophisticated and fashionable designs, and with porcellanato (high-quality porcelain) tiles. Beginning in 2004, the stronger Euro made it much cheaper to manufacture ceramic tile in the U.S. and distribute them from such a plant. The U.S. is the world's largest market for ceramic tile. A number of European (mostly Italian) ceramic tile manufacturers built or expanded their U.S. plants, or bought out domestic ceramic tile firms. The European tile firms not only benefitted from lower manufacturing costs but also from distributing at a lower cost and faster; of course, less inventory was required.
Things have been different in the dimension stone tile industry. By the beginning of the 1980s, automated stone tile plants were busy in Italy, the world leader that had close to a monopoly. The plants were not quite equivalent to those today, since additional innovations have crept in. Italy is now one among many; China has many plants with automated stone tile lines, as does Spain, Turkey, Brazil, and other countries. The three U.S. automated tile lines that were short-time producers of granite tile from the mid1980s to the mid1990s closed one by one; the last one actually closed in mid2002. Marble tile is still produced to a limited extent, but most American marble tile comes from tile plants in Carrara, Italy that make it from rough blocks of Vermont (Danby) marble. The amount of slate flooring tile has dwindled a little since 2000.
Roof tiles are designed mainly to keep out rain, and are traditionally made from locally available materials such as clay or slate. Modern materials such as concrete and plastic are also used and some clay tiles have a waterproof glaze.
A large number of shapes (or "profiles") of roof tiles have evolved. These include:
There are also roof tiles for special positions, particularly where the planes of the several pitches meet. They include ridge, hip and valley tiles.
The earliest finds of roof tiles in archaic Greece are documented from a very restricted area around Corinth (Greece), where fired tiles began to replace thatchet roofs at two temples of Apollo and Poseidon between 700-650 BC.[5] Spreading rapidly, roof tiles were within fifty years in evidence for a large number of sites around the Eastern Mediterranean, including Mainland Greece, Western Asia Minor, Southern and Central Italy.[6] Early roof tiles showed an S-shape, with the pan and cover tile forming one piece. They were rather bulky affairs, weighting around 30 kg apiece.[7] Being more expensive and labour-intensive to produce than thatchet, their introduction has been explained with their greatly enhanced fire resistance which gave desired protection to the costly temples.[8]
The spread of the roof tile technique has to be viewed in connection with the simultaneous rise of monumental architecture in Archaic Greece. Only the appearing stone walls, which were replacing the earlier mudbrick and wood walls, were strong enough to support the weight of a tiled roof.[9] As a side-effect, it has been assumed that the new stone and tile construction also ushered in the end of 'Chinese roof' (Knickdach) construction in Greek architecture, as they made the need for an extended roof as rain protection for the mudbrick walls obsolete.[10]
These are commonly made of ceramic or stone, although recent technological advances have resulted in glass tiles for floors as well. Ceramic tiles may be painted and glazed. Small mosaic tiles may be laid in various patterns. Floor tiles are typically set into mortar consisting of sand, cement and often a latex additive for extra strength. The spaces between the tiles are nowadays filled with sanded or unsanded floor grout, but traditionally mortar was used.
Natural stone tiles can be especially beautiful. However, as a natural product they are a little less uniform in color and pattern and require more planning for use and installation. Since stone tiles are mass-produced, they have very uniform width and length dimensions. Stone tiles such as those of granite or marble are sawn on both sides and then polished or finished on the facing up side, so that they have a uniform thickness. Other natural stone tiles such as slate are typically "riven" (split) on the facing up side so that the thickness of the tile varies slightly from one spot on the tile to another and from one tile to another. Variations in tile thickness can be handled by adjusting the amount of mortar under each part of the tile, by using wide grout lines that "ramp" between different thicknesses, or by using a cold chisel to knock off high spots.
Some stone tiles such as polished granite and marble are inherently very slippery when wet. Stone tiles with a riven (split) surface such as slate or with a sawn and then sandblasted or honed surface will be more slip resistant. Ceramic tile for use in wet areas can be made more slip resistant either by using very small tiles so that the grout lines acts as grooves or by imprinting a contour pattern onto the face of the tile.
The hardness of natural stone tiles varies such that some of the softer stone (i.e. limestone) tiles are not suitable for very heavy traffic floor areas. On the other hand, ceramic tiles typically have a glazed upper surface and when that become scratched or pitted the floor looks worn, whereas the same amount of wear on natural stone tiles won't show or will be less noticeable.
Natural stone tiles can be stained by spilled liquids; they must be sealed and periodically resealed with a sealant in contrast to ceramic tiles which only need their grout lines sealed. However, because of the complex, non repeating patterns in natural stone, small amounts of dirt on many natural stone floor tiles do not show.
Most vendors of stone tiles emphasize that there will be variation in color and pattern from one batch of tiles to another of the same description and variation within the same batch.
Stone floor tiles tend to be heavier than ceramic tiles and somewhat more prone to breakage during shipment.
Ceiling tiles are lightweight tiles used in the interior of buildings. They are placed on a steel grid and, depending on the tile selected, may provide thermal insulation, sound absorption, enhanced fire protection, and improved indoor air quality. Also frequently called ceiling panels, or drop-ceiling tiles, they offer the advantage of easy access to wiring and plumbing above the ceiling grid, and can be easily changed, removed, or replaced as needed. They are fabricated from perlite, wood, mineral wool, plastic, tin, aluminum, and fibers from recycled paper. They frequently have patterns comprised of holes, to improve their sound absorption properties, though many have a molded surface providing a textured, sculpted, or
pressed-tin look to the ceiling. Some tiles are available with decorative photo/transfer surfaces, some are approved for installation under fire suppression sprinkler heads so the sprinklers do not show, some are approved for use in food preparation areas, and some are certified for indoor air quality by the GreenGuard Institute. Tiles are available that resist mold and moisture damage, that have enhanced acoustical properties, and that can be easily trimmed with household scissors. Recycling old tiles depends upon the material used to make them, and some landfills no longer accept traditional mineral fiber tiles, so they must be recycled to the manufacturer.
Decorative typically takes the form of mosaic upon the walls, floor, or ceiling of a building. Although decorative tilework was known and extensively practiced in the ancient world (as evidenced in the magnificent mosaics of Pompeii and Herculaneum), it perhaps reached its greatest expression during the Islamic period.
Some places, notably Portugal and São LuÃs, have a tradition of tilework (called azulejos) on buildings that continues today.
In the United States, decorative tiles were in vogue, especially in southern California, in the 1920s and 1930s. Prominent among art tile makers during this period was Ernest A. Batchelder.
Ceramic Tile
Tiles are often used to form wall and floor coverings, and can range from simple square tiles to complex mosaics. Tiles are most often made from ceramic, with a hard glaze finish, but other materials are also commonly used, such as glass, marble, granite, slate, and reformed ceramic slurry, which is cast in a mould and fired.
In the past twenty years, the technology surrounding porcelain tile and glass tiles has become more efficient, allowing more mass production. Similarly, the invention of automated tile lines that use diamonds to cut and finish stone slabs into tiles has made stone tiles more available. This has allowed these tiles to move from being niche items into broader markets. The DSAN U.S. Ceramic Tile Demand Index has shown a growth of 5.5% annually for the 2000-2005 period. The DSAN World Demand for (finished) Granite Index has shown a growth of 14% annually for the 2000-2005 period, The DSAN World Demand for (finished) Marble Index has shown a growth of 10.5% annually for the 2000-2005 period. The U.S. market for ceramic tile is over $3 billion.
Accompanying the growth in tile demand has been some shifts in the world ceramic tile industry. In 1990, Europe accounted for 54% of world ceramic tile production. By 2002, Europe was down to 25% of world ceramic tile production. In 2005, world ceramic tile production was about 7 billion sq. meters, of which China produced 35%, and Spain, Italy, and Brazil shared the next 25%, with their productions spaced neck and neck. Except for Spain, European ceramic tile production in the same period has dropped a little absolutely. Asia now has state-of-the-art equipment in its ceramic tile plants, which means much lower costs. The Europeans still do well with higher-priced ceramic tile with sophisticated and fashionable designs, and with porcellanato (high-quality porcelain) tiles. Beginning in 2004, the stronger Euro made it much cheaper to manufacture ceramic tile in the U.S. and distribute them from such a plant. The U.S. is the world's largest market for ceramic tile. A number of European (mostly Italian) ceramic tile manufacturers built or expanded their U.S. plants, or bought out domestic ceramic tile firms. The European tile firms not only benefitted from lower manufacturing costs but also from distributing at a lower cost and faster; of course, less inventory was required.
Things have been different in the dimension stone tile industry. By the beginning of the 1980s, automated stone tile plants were busy in Italy, the world leader that had close to a monopoly. The plants were not quite equivalent to those today, since additional innovations have crept in. Italy is now one among many; China has many plants with automated stone tile lines, as does Spain, Turkey, Brazil, and other countries. The three U.S. automated tile lines that were short-time producers of granite tile from the mid1980s to the mid1990s closed one by one; the last one actually closed in mid2002. Marble tile is still produced to a limited extent, but most American marble tile comes from tile plants in Carrara, Italy that make it from rough blocks of Vermont (Danby) marble. The amount of slate flooring tile has dwindled a little since 2000.
Roof tiles
)
Fancy Japanese roof tiles
)
Ancient Greek roof tiles
A large number of shapes (or "profiles") of roof tiles have evolved. These include:
- Flat tiles - the simplest type, which are laid in regular overlapping rows. This profile is suitable for stone and wooden tiles, and most recently, solar cells.
- Imbrex and tegula, an ancient Roman pattern of curved and flat tiles that make rain channels on a roof
- Roman tiles - flat in the middle, with a curve at one end at a curve at the other, to allow interlocking.
- Pantiles - with an S-shaped profile, allowing adjacent tiles to interlock. These result in a ridged pattern resembling a ploughed field.
- Mission or barrel tiles are semi-cylindrical tiles made by forming clay around a curved surface, often a log or one's thigh, and laid in alternating columns of convex and concave tiles.
There are also roof tiles for special positions, particularly where the planes of the several pitches meet. They include ridge, hip and valley tiles.
Invention
Fired roof tiles are found as early as the 3rd millennium BC in the Early Helladic House of the tiles in Lerna, Greece.[1] [2] Debris found at the site contained thousands of terracotta tiles having fallen from the roof.[3] In the Mycenaean period, roofs tiles are documented for Gla and Midea.[4]The earliest finds of roof tiles in archaic Greece are documented from a very restricted area around Corinth (Greece), where fired tiles began to replace thatchet roofs at two temples of Apollo and Poseidon between 700-650 BC.[5] Spreading rapidly, roof tiles were within fifty years in evidence for a large number of sites around the Eastern Mediterranean, including Mainland Greece, Western Asia Minor, Southern and Central Italy.[6] Early roof tiles showed an S-shape, with the pan and cover tile forming one piece. They were rather bulky affairs, weighting around 30 kg apiece.[7] Being more expensive and labour-intensive to produce than thatchet, their introduction has been explained with their greatly enhanced fire resistance which gave desired protection to the costly temples.[8]
The spread of the roof tile technique has to be viewed in connection with the simultaneous rise of monumental architecture in Archaic Greece. Only the appearing stone walls, which were replacing the earlier mudbrick and wood walls, were strong enough to support the weight of a tiled roof.[9] As a side-effect, it has been assumed that the new stone and tile construction also ushered in the end of 'Chinese roof' (Knickdach) construction in Greek architecture, as they made the need for an extended roof as rain protection for the mudbrick walls obsolete.[10]
Floor tiles
)
6"x6" porcelain floor tiles
)
The elaborate floor pattern of the Sydney Queen Victoria Building
Natural stone tiles can be especially beautiful. However, as a natural product they are a little less uniform in color and pattern and require more planning for use and installation. Since stone tiles are mass-produced, they have very uniform width and length dimensions. Stone tiles such as those of granite or marble are sawn on both sides and then polished or finished on the facing up side, so that they have a uniform thickness. Other natural stone tiles such as slate are typically "riven" (split) on the facing up side so that the thickness of the tile varies slightly from one spot on the tile to another and from one tile to another. Variations in tile thickness can be handled by adjusting the amount of mortar under each part of the tile, by using wide grout lines that "ramp" between different thicknesses, or by using a cold chisel to knock off high spots.
)
Floor tile in Karpas, northeastern Cyprus.
The hardness of natural stone tiles varies such that some of the softer stone (i.e. limestone) tiles are not suitable for very heavy traffic floor areas. On the other hand, ceramic tiles typically have a glazed upper surface and when that become scratched or pitted the floor looks worn, whereas the same amount of wear on natural stone tiles won't show or will be less noticeable.
Natural stone tiles can be stained by spilled liquids; they must be sealed and periodically resealed with a sealant in contrast to ceramic tiles which only need their grout lines sealed. However, because of the complex, non repeating patterns in natural stone, small amounts of dirt on many natural stone floor tiles do not show.
Most vendors of stone tiles emphasize that there will be variation in color and pattern from one batch of tiles to another of the same description and variation within the same batch.
Stone floor tiles tend to be heavier than ceramic tiles and somewhat more prone to breakage during shipment.
Ceiling tiles
)
Vinyl Ceiling Tile
)
A high school in the United States covered with tiles
pressed-tin look to the ceiling. Some tiles are available with decorative photo/transfer surfaces, some are approved for installation under fire suppression sprinkler heads so the sprinklers do not show, some are approved for use in food preparation areas, and some are certified for indoor air quality by the GreenGuard Institute. Tiles are available that resist mold and moisture damage, that have enhanced acoustical properties, and that can be easily trimmed with household scissors. Recycling old tiles depends upon the material used to make them, and some landfills no longer accept traditional mineral fiber tiles, so they must be recycled to the manufacturer.
)
Panel of glazed tiles by Jorge Colaço (1922) representing an episode of the battle of Aljubarrota (1385) between the Portuguese and Castillian armies. Lisboa, Pavilhão Carlos Lopes.
Decorative tilework
)
Ancient mosaic in the British Museum.
)
Typical tilework on buildings in Santarém, Portugal.
Decorative typically takes the form of mosaic upon the walls, floor, or ceiling of a building. Although decorative tilework was known and extensively practiced in the ancient world (as evidenced in the magnificent mosaics of Pompeii and Herculaneum), it perhaps reached its greatest expression during the Islamic period.
Some places, notably Portugal and São LuÃs, have a tradition of tilework (called azulejos) on buildings that continues today.
In the United States, decorative tiles were in vogue, especially in southern California, in the 1920s and 1930s. Prominent among art tile makers during this period was Ernest A. Batchelder.
Islamic tilework
Perhaps because of the tenets of Muslim law (sharia) which disavow religious icons and images in favor of more abstract and universal representations of the divine, many consider decorative tilework to have reached a pinnacle of expression and detail during the Islamic period. Palaces, public buildings, and mosques were heavily decorated with dense, often massive mosaics and friezes of astonishing complexity. As both the influence and the extent of Islam spread during the Middle Ages this artistic tradition was carried along, finding expression from the gardens and courtyards of Málaga in Moorish Spain to the mosaics of the Hagia Sophia in Constantinople.The mathematics of tiling
Certain shapes of tiles, most obviously rectangles, can be replicated to cover a surface with no gaps. These shapes are said to tessellate (from the Latin tessera, 'tile'). For detailed information on tilings see the tessellation page.Literature
Roof tiles- Marilyn Y. Goldberg, “Greek Temples and Chinese Roofs,” American Journal of Archaeology, Vol. 87, No. 3. (Jul., 1983), pp. 305-310
- Orjan Wikander, “Archaic Roof Tiles the First Generations,” Hesperia, Vol. 59, No. 1. (Jan. - Mar., 1990), pp. 285-290
- William Rostoker; Elizabeth Gebhard, “The Reproduction of Rooftiles for the Archaic Temple of Poseidon at Isthmia, Greece,” Journal of Field Archaeology, Vol. 8, No. 2. (Summer, 1981), pp. 211-227
See also
- Dimension stone
- Dropped Ceiling
- Encaustic tile
- Glass tiles
- Laying tile
- Marble
- Mosaic
- Porcelain tile
- Quarry tile
- Roof shingle
- Slate
- Tile-based game
- Tiles Brands
- Tile Mural
- Tiling puzzle
- Toynbee tiles
- Zinc tile
References
1. ^ Joseph W. Shaw, The Early Helladic II Corridor House: Development and Form, American Journal of Archaeology, Vol. 91, No. 1. (Jan., 1987), pp. 59-79 (59)
2. ^ John C. Overbeck, “Greek Towns of the Early Bronze Age”, The Classical Journal, Vol. 65, No. 1. (Oct., 1969), pp. 1-7 (5)
3. ^ J. L. Caskey, "Lerna in the Early Bronze Age", American Journal of Archaeology, Vol. 72, No. 4. (Oct., 1968), pp. 313-316 (314)
4. ^ Ione Mylonas Shear, “Excavations on the Acropolis of Midea: Results of the Greek-Swedish Excavations under the Direction of Katie Demakopoulou and Paul Ã¥ström”, American Journal of Archaeology, Vol. 104, No. 1. (Jan., 2000), pp. 133-134
5. ^ Orjan Wikander, p.285
6. ^ Orjan Wikander, p.286
7. ^ William Rostoker; Elizabeth Gebhard, p. 212
8. ^ Orjan Wikander, p.289
9. ^ Marilyn Y. Goldberg, p.309
10. ^ Marilyn Y. Goldberg, p.305
2. ^ John C. Overbeck, “Greek Towns of the Early Bronze Age”, The Classical Journal, Vol. 65, No. 1. (Oct., 1969), pp. 1-7 (5)
3. ^ J. L. Caskey, "Lerna in the Early Bronze Age", American Journal of Archaeology, Vol. 72, No. 4. (Oct., 1968), pp. 313-316 (314)
4. ^ Ione Mylonas Shear, “Excavations on the Acropolis of Midea: Results of the Greek-Swedish Excavations under the Direction of Katie Demakopoulou and Paul Ã¥ström”, American Journal of Archaeology, Vol. 104, No. 1. (Jan., 2000), pp. 133-134
5. ^ Orjan Wikander, p.285
6. ^ Orjan Wikander, p.286
7. ^ William Rostoker; Elizabeth Gebhard, p. 212
8. ^ Orjan Wikander, p.289
9. ^ Marilyn Y. Goldberg, p.309
10. ^ Marilyn Y. Goldberg, p.305
External links
ceramic is derived from the Greek word κεραμικός (keramikos). The term covers inorganic non-metallic materials which are formed by the action of heat.
..... Click the link for more information.
..... Click the link for more information.
Balanced Rock stands in Garden of the Gods park in Colorado Springs, CO]] A rock is a naturally occurring aggregate of minerals and/or mineraloids. The Earth's lithosphere is made of rock. In general rocks are of three types, namely, igneous, sedimentary, and metamorphic.
..... Click the link for more information.
..... Click the link for more information.
Glass is a noncrystalline material that can maintain indefinitely, if left undisturbed, its overall form and amorphous microstructure at a temperature below its glass transition temperature.
..... Click the link for more information.
..... Click the link for more information.
roof is the uppermost, covering, part of a building. The purpose of the roof is to protect both the building itself and its living or material contents from the effects of weather.
..... Click the link for more information.
..... Click the link for more information.
floor is generally the lower horizontal surface of a room, and/or the supporting structure underneath it. It also commonly refers to flooring, or a wall-to-wall floor covering, which forms the decorative surface of the floor.
..... Click the link for more information.
..... Click the link for more information.
A 'wall' is a usually solid structure that defines and sometimes protects an area. Most commonly, a wall delineates a building and supports its superstructure, separates space in buildings into rooms, or protects or delineates a space in the open air.
..... Click the link for more information.
..... Click the link for more information.
ceiling is an overhead interior surface that bounds the upper limit of a room. Generally not a structural element, but a finished surface concealing the underside of the floor or roof structure above.
A cathedral ceiling is any tall ceiling area similar to those in a church.
..... Click the link for more information.
A cathedral ceiling is any tall ceiling area similar to those in a church.
..... Click the link for more information.
Perlite is an amorphous volcanic glass that has a relatively high water content, typically formed by the hydration of obsidian. It occurs naturally and has the unusual property of greatly expanding when heated sufficiently.
..... Click the link for more information.
..... Click the link for more information.
The WOOD callsign may refer to:
..... Click the link for more information.
- WOOD-TV – an NBC-affiliated television station in Grand Rapids, Michigan
- WOOD (AM) – an AM radio station in Grand Rapids, Michigan
- WOOD-FM - an FM radio station in Grand Rapids, Michigan
..... Click the link for more information.
rockwool packing that still requires topcaulking.]] Mineral wool, means fibers made from minerals or metal oxides, be they synthetic or natural. In industry use, MMMF (man-made-mineral-fibres) generally refer to synthetic materials.
..... Click the link for more information.
..... Click the link for more information.
A tile-based game is a game that uses tiles as one of the fundamental elements of play. It has different meanings depending on how it is used. There are many traditional games which use tiles, but when referring to video games, normally a tile-based game means a game which uses
..... Click the link for more information.
..... Click the link for more information.
A 'wall' is a usually solid structure that defines and sometimes protects an area. Most commonly, a wall delineates a building and supports its superstructure, separates space in buildings into rooms, or protects or delineates a space in the open air.
..... Click the link for more information.
..... Click the link for more information.
floor is generally the lower horizontal surface of a room, and/or the supporting structure underneath it. It also commonly refers to flooring, or a wall-to-wall floor covering, which forms the decorative surface of the floor.
..... Click the link for more information.
..... Click the link for more information.
MOSAIC may refer to:
..... Click the link for more information.
- MOSAIC Research Group
- MOSAIC Threat Assessment Systems
- MOSAIC (housing cooperative)
- Maui Optical System and Integration Center
This article is about a decorative art.
..... Click the link for more information.
ceramic is derived from the Greek word κεραμικός (keramikos). The term covers inorganic non-metallic materials which are formed by the action of heat.
..... Click the link for more information.
..... Click the link for more information.
glaze is a specialised form of glass and therefore can be described as an amorphous solid. Glazing is the process of coating the piece with a thin layer the raw materials which, after being fired in a kiln, will form a hard, glass-like coating.
..... Click the link for more information.
..... Click the link for more information.
Glass is a noncrystalline material that can maintain indefinitely, if left undisturbed, its overall form and amorphous microstructure at a temperature below its glass transition temperature.
..... Click the link for more information.
..... Click the link for more information.
Marble is a nonfoliated metamorphic rock resulting from the metamorphism of limestone, composed mostly of calcite (a crystalline form of calcium carbonate, CaCO3). It is extensively used for sculpture, as a building material, and in many other applications.
..... Click the link for more information.
..... Click the link for more information.
Granite (IPA: /ˈɡrænɪt/) is a common and widely occurring type of intrusive, felsic, igneous rock. Granites are usually medium to coarsely crystalline, occasionally with some individual crystals larger than the
..... Click the link for more information.
..... Click the link for more information.
Slate is a fine-grained, foliated, , metamorphic rock derived from an original shale-type sedimentary rock composed of clay or volcanic ash through low grade regional metamorphism.
..... Click the link for more information.
..... Click the link for more information.
Porcelain tiles are ceramic tiles with a water absorption rate of less than 0.5 percent that are used to cover floors and walls. They can either be unglazed or glazed.
The hardness of the tile is rated from zero to five according to the Porcelain Enamel Institute scale.
..... Click the link for more information.
The hardness of the tile is rated from zero to five according to the Porcelain Enamel Institute scale.
..... Click the link for more information.
Glass tiles are pieces of glass formed into consistent shapes. Glass was used in mosaics as early as 2500 BC, but it took until the 3rd Century BC before innovative artisans in Greece, Persia and India created glass tiles.
..... Click the link for more information.
..... Click the link for more information.
Rain is a type of precipitation, a product of the condensation of atmospheric water vapor that is deposited on the earth's surface. It forms when separate drops of water fall to the Earth's surface from clouds.
..... Click the link for more information.
..... Click the link for more information.
Slate is a fine-grained, foliated, , metamorphic rock derived from an original shale-type sedimentary rock composed of clay or volcanic ash through low grade regional metamorphism.
..... Click the link for more information.
..... Click the link for more information.
Concrete is a construction material that consists of cement (commonly Portland cement) as well as other cementitious materials such as fly ash and slag cement, aggregate (generally a coarse aggregate such as gravel limestone or granite, plus a fine aggregate such as sand or
..... Click the link for more information.
..... Click the link for more information.
Plastic is the general term for a wide range of synthetic or semisynthetic polymerization products. They are composed of organic condensation or addition polymers and may contain other substances to improve performance or economics.
..... Click the link for more information.
..... Click the link for more information.
A solar cell or photovoltaic cell is a device that converts light energy into electrical energy. Sometimes the term solar cell is reserved for devices intended specifically to capture energy from sunlight, while the term photovoltaic cell
..... Click the link for more information.
..... Click the link for more information.
imbrex and tegula (plurals imbrices and tegulae) were interlocking roofing tiles used in ancient Greek and Roman architecture as a waterproof and durable roof covering.
..... Click the link for more information.
..... Click the link for more information.
In mathematics, the concept of a curve tries to capture the intuitive idea of a geometrical one-dimensional and continuous object. A simple example is the circle.
..... Click the link for more information.
..... Click the link for more information.
The name pantiles originally referred to a form of tile used in paving and (more often) roofing. Today the name is also used to refer to an area in the town of Tunbridge Wells, Kent, England which formerly used such tiling.
..... Click the link for more information.
..... Click the link for more information.
This article is copied from an article on Wikipedia.org - the free encyclopedia created and edited by online user community. The text was not checked or edited by anyone on our staff. Although the vast majority of the wikipedia encyclopedia articles provide accurate and timely information please do not assume the accuracy of any particular article. This article is distributed under the terms of GNU Free Documentation License.
Herod_Archelaus
