Information about Attractor

An attractor is a set to which a dynamical system evolves after a long enough time. That is, points that get close enough to the attractor remain close even if slightly disturbed. Geometrically, an attractor can be a point, a curve, a manifold, or even a complicated set with a fractal structure known as a strange attractor. Describing the attractors of chaotic dynamical systems has been one of the achievements of chaos theory.

A trajectory of the dynamical system in the attractor does not have to satisfy any special constraints except for remaining on the attractor. The trajectory may be periodic or chaotic or of any other type.

Motivation

A dynamical system is often described in terms of differential equations that describe its behavior for a short period of time. To determine the behavior for longer periods it is necessary to integrate the equations, either through analytical means or through iteration, often with the aid of computers.

Dynamical systems in the physical world tend to be dissipative: if it were not for some driving force, the motion would cease. (Dissipation may come from internal friction, thermodynamic losses, or loss of material, among many causes.) The dissipation and the driving force tend to combine to kill out initial transients and settle the system into its typical behavior. The part of the phase space of the dynamical system corresponding to the typical behavior is the attracting set or attractor.

Invariant sets and limit sets are similar to the attractor concept. An invariant set is a set that evolves to itself under the dynamics. Attractors may contain invariant sets. A limit set is a set of points such that there exists some initial state that ends up arbitrarily close to the limit set (i.e. to each point of the set) as time goes to infinity. Attractors are limit sets, but not all limit sets are attractors: It is possible to have some points of a system converge to a limit set, but different points when perturbed slightly off the limit set may get knocked off and never return to the vicinity of the limit set.

For example, the damped pendulum has two invariant points: the point of minimum height and the point of maximum height. The point is also a limit set, as trajectories converge to it; the point is not a limit set. Because of the dissipation, the point is also an attractor. If there were no dissipation, would not be an attractor.

Mathematical definition

Let f(t, •) be a function which specifies the dynamics of the system. That is, if s is an element of the phase space, i.e., s totally specifies the state of the system at some instant, then f(0, s) = s and for t>0, f(t, s) evolves s forward t units of time. For example, if our system is an isolated point particle in one dimension, then its position in phase space is given by (x,v) where x is the position of the particle and v is its velocity. If the particle is not acted on by any potential (flies around freely) then dynamics is given by f(t,(x,v)) = x+t*v.

An attractor is a subset A of the phase space such that:
  • A is invariant under f; i.e., if s is an element of A then so is f(t,s), for all t.
  • There is a neighborhood of A, B(A) called the basin of attraction for A, such that B(A) = {s| for all neighborhoods N of A there is a T so that for all t>T f(t,s) in N}. In other words, B(A) is the set of points that 'enter A in the limit'.
  • There is no subset of A with the first two properties.
Since the basin of attraction is a neighborhood of A, i.e. contains an open set containing A, every state 'close enough' to A is attracted to A. Technically the notion of an attractor depends on the topology placed on the phase space, but normally the standard topology on Rn is assumed.

Other definitions of attractor are sometimes used. For example, some require that an attractor have positive measure (preventing a point from being an attractor), others relax the requirement that B(A) be a neighborhood.

Types of attractors

Attractors are parts of the phase space of the dynamical system. Until the 1960s, as evidenced by textbooks of that era, attractors were thought of as being geometrical subsets of the phase space: points, lines, surfaces, volumes. The (topologically) wild sets that had been observed were thought to be fragile anomalies. Stephen Smale was able to show that his horseshoe map was robust and that its attractor had the structure of a Cantor set.

Two simple attractors are the fixed point and the limit cycle. There can be many other geometrical sets that are attractors. When these sets (or the motions on them), are hard to describe, then the attractor is a strange attractor, as described in the section below.

Fixed point

A fixed point is a point that a system evolves towards, such as the final states of a falling pebble, a damped pendulum, or the water in a glass. It corresponds to a fixed point of the evolution function that is also attracting.

Limit cycle

See main article limit cycle
A limit cycle is a periodic orbit of the system that is isolated. Examples include the swings of a pendulum clock, the tuning circuit of a radio, and the heartbeat while resting. The ideal pendulum is not an example because its orbits are not isolated. In phase space of the ideal pendulum, near any point of a periodic orbit there is another point that belongs to a different periodic orbit.

Limit tori

There may be more than one frequency in the periodic trajectory of the system through the state of a limit cycle. If two of these frequencies form an irrational fraction (i.e. they are incommensurate), the trajectory is no longer closed, and the limit cycle becomes a limit torus. We call this kind of attractor -torus if there are incommensurate frequencies. For example here is a 2-torus:



A time series corresponding to this attractor is a quasiperiodic series: A discretely sampled sum of periodic functions (not necessarily sine waves) with incommensurate frequencies. Such a time series does not have a strict periodicity, but its power spectrum still consists only of sharp lines.

Strange attractor

Enlarge picture
A plot of Lorenz's strange attractor for values ρ=28, σ = 10, β = 8/3
An attractor is informally described as strange if it has non-integer dimension or if the dynamics on it are chaotic. The term was coined by David Ruelle and Floris Takens to describe the attractor that resulted from a series of bifurcations of a system describing fluid flow. Strange attractors are often differentiable in a few directions, but some are like a Cantor dust, and therefore not differentiable.

Examples of strange attractors include the Hénon attractor, Rössler attractor, Lorenz attractor, Tamari attractor.

Partial differential equations

Parabolic partial differential equations may have finite-dimensional attractors. The diffusive part of the equation damps higher frequencies and in some cases leads to a global attractor. The Ginzburg-Landau, the Kuramoto-Sivashinsky, and the two-dimensional, forced Navier-Stokes equations are all known to have global attractors of finite dimension.

For the three-dimensional, incompressible Navier-Stokes equation with periodic boundary conditions, if it has a global attractor, then this attractor will be of finite dimensions.

Further reading

See also

External links

References

dynamical system concept is a mathematical formalization for any fixed "rule" which describes the time dependence of a point's position in its ambient space. Examples include the mathematical models that describe the swinging of a clock pendulum, the flow of water in a pipe, and
..... Click the link for more information.
A spatial point is a concept used to define an exact location in space. It has no volume, area or length, making it a zero dimensional object. Points are used in the basic language of geometry, physics, vector graphics (both 2D and 3D), and many other fields.
..... Click the link for more information.
In mathematics, the concept of a curve tries to capture the intuitive idea of a geometrical one-dimensional and continuous object. A simple example is the circle.
..... Click the link for more information.
manifold is an abstract mathematical space in which every point has a neighborhood which resembles Euclidean space, but in which the global structure may be more complicated. In discussing manifolds, the idea of dimension is important.
..... Click the link for more information.
fractal.]]

A fractal is generally "a rough or fragmented geometric shape that can be subdivided in parts, each of which is (at least approximately) a reduced-size copy of the whole,"[1] a property called self-similarity.
..... Click the link for more information.
chaos theory describes the behavior of certain nonlinear dynamical systems that under specific conditions exhibit dynamics that are sensitive to initial conditions (popularly referred to as the butterfly effect).
..... Click the link for more information.
trajectory is the path a moving object follows through space. The object might be a projectile or a satellite, for example. It thus includes the meaning of orbit - the path of a planet, an asteroid or a comet as it travels around a central mass.
..... Click the link for more information.
dynamical system concept is a mathematical formalization for any fixed "rule" which describes the time dependence of a point's position in its ambient space. Examples include the mathematical models that describe the swinging of a clock pendulum, the flow of water in a pipe, and
..... Click the link for more information.
differential equation is a mathematical equation for an unknown function of one or several variables that relates the values of the function itself and of its derivatives of various orders.
..... Click the link for more information.
INTErnational Gamma-Ray Astrophysics Laboratory (INTEGRAL) is detecting some of the most energetic radiation that comes from space. It is the most sensitive gamma ray observatory ever launched.
..... Click the link for more information.
Friction is the force of two surfaces in contact. It is not a fundamental force, as it is derived from electromagnetic forces between atoms. When contacting surfaces move relative to each other, the friction between the two objects converts kinetic energy into thermal energy, or
..... Click the link for more information.
Thermodynamics (from the Greek θερμη, therme, meaning "heat" and δυναμις, dynamis, meaning "power") is a branch of physics that studies the effects of changes in temperature, pressure, and volume on
..... Click the link for more information.
phase space, introduced by Willard Gibbs in 1901, is a space in which all possible states of a system are represented, with each possible state of the system corresponding to one unique point in the phase space.
..... Click the link for more information.
In mathematics, especially in the study of dynamical systems, a limit set is the state a dynamical system reaches after an infinite amount of time has passed, by either going forward or backwards in time.
..... Click the link for more information.
subset of a set B if A is "contained" inside B. Notice that A and B may coincide. The relationship of one set being a subset of another is called inclusion or containment.
..... Click the link for more information.
neighbourhood (or neighborhood) is one of the basic concepts in a topological space. Intuitively speaking, a neighbourhood of a point is a set containing the point where you can wiggle the point a bit without leaving the set.
..... Click the link for more information.
In mathematics, stability theory deals with the stability of solutions (or sets of solutions) of differential equations and dynamical systems.

Definition

Let (R, X, Φ) be a real dynamical system with R the real numbers, X
..... Click the link for more information.
In topology and related fields of mathematics, a set U is called open if, intuitively speaking, starting from any point x in U one can move by a small amount in any direction and still be in the set U.
..... Click the link for more information.
In mathematics the concept of a measure generalizes notions such as "length", "area", and "volume" (but not all of its applications have to do with physical sizes). Informally, given some base set, a "measure" is any consistent assignment of "sizes" to (some of) the subsets of the
..... Click the link for more information.
Centuries: 19th century - 20th century - 21st century

1930s 1940s 1950s - 1960s - 1970s 1980s 1990s
1960 1961 1962 1963 1964
1965 1966 1967 1968 1969

- -
-

Their 1960s decade refers to the years from 1960 to 1969, inclusive.
..... Click the link for more information.
A spatial point is a concept used to define an exact location in space. It has no volume, area or length, making it a zero dimensional object. Points are used in the basic language of geometry, physics, vector graphics (both 2D and 3D), and many other fields.
..... Click the link for more information.
line can be described as an ideal zero-width, infinitely long, perfectly straight curve (the term curve in mathematics includes "straight curves") containing an infinite number of points. In Euclidean geometry, exactly one line can be found that passes through any two points.
..... Click the link for more information.
surface is a two-dimensional manifold. The most familiar examples are those that arise as the boundaries of solid objects in ordinary three-dimensional Euclidean space, E³.
..... Click the link for more information.
The volume of a solid object is the three-dimensional concept of how much space it occupies, often quantified numerically. One-dimensional figures (such as lines) and two-dimensional shapes (such as squares) are assigned zero volume in the three-dimensional space.
..... Click the link for more information.
Topology (Greek topos, "place," and logos, "study") is a branch of mathematics that is an extension of geometry. Topology begins with a consideration of the nature of space, investigating both its fine structure and its global structure.
..... Click the link for more information.
Stephen Smale
Born 1930

Field Mathematics
Institutions University of Chicago, Columbia University and UC-Berkeley
Alma mater University of Michigan
..... Click the link for more information.
In the mathematics of chaos theory, a horseshoe map is any member of a class of chaotic maps of the square into itself. It is a core example in the study of dynamical systems. The map was introduced by Smale while studying the behavior of the orbits of the van der Pol oscillator.
..... Click the link for more information.
In mathematics, structural stability is an aspect of stability theory concerning whether a given function is sensitive to a small perturbation. The general idea is that a function or flow is structurally stable if any other function or flow close enough to it has similar dynamics
..... Click the link for more information.
In mathematics, the Cantor set, introduced by German mathematician Georg Cantor in 1883[1], is a set of points lying on a single line segment that has a number of remarkable and deep properties.
..... Click the link for more information.
In mathematics, in the area of dynamical systems, a limit-cycle on a plane or a two-dimensional manifold is a closed trajectory in phase space having the property that at least one other trajectory spirals into it either as time approaches infinity or as time approaches
..... Click the link for more information.


This article is copied from an article on Wikipedia.org - the free encyclopedia created and edited by online user community. The text was not checked or edited by anyone on our staff. Although the vast majority of the wikipedia encyclopedia articles provide accurate and timely information please do not assume the accuracy of any particular article. This article is distributed under the terms of GNU Free Documentation License.
Herod_Archelaus


page counter