iPedia Free Information Center

Information about Scientific Notation

Scientific notation, also known as standard form, is a notation for writing numbers that is often used by scientists and mathematicians to make it easier to write large and small numbers. A number that is written in scientific notation has several properties that make it very useful to scientists.

Variations

The basic concept for the practical notations is this mathematical exponential expression using powers of ten :
wherein exponent b is an integer, and the coefficient a any real number, called the significand or mantissa (using "mantissa" may cause confusion as it can also refer to the fractional part of the common logarithm).

Normalized notation

Written in the form a × 10b, exponent b is chosen such that the absolute value of a remains at least one but less than ten . Normal mathematics convention dictates a minus sign to precede the first of the decimal digits of a for a negative number; that of b for a number with absolute value between 0 and 1, e.g. minus one half is −5 × 10−1. There is no need to represent zero in normalized form, the digit 0 suffices. The normalized form allows easy comparison of two numbers of the same sign in a, as the exponent b gives the number's order of magnitude.

It is implicitly assumed that scientific notation should always be normalized except during calculations or when an unnormalized form, such as engineering notation, is desired. (Normalized) scientific notation is often called exponential notation — though the latter term is more general as it applies as well, for instance, to engineering notation or any value for a and to bases other than 10 like 315 × 220.

E notation

Most calculators and many computer programs present very large and very small results in scientific notation. Because exponents like 107 can't always be conveniently represented on computers, typewriters, and calculators, an alternate notation is often used: the letter "E" or "e" is used for "times ten raised to the power", thus replacing the "×10n" while the exponent is not superscripted but is left on the same level with the significand (e.g. a E−6 not a E−6). The sign is often given even if positive (e.g. a E+11 rather than a E11). For example, 6.0221415 E+23 or 6.0221415 e23 is the same as 6.0221415 × 1023(Avogadro's number). Note that this character "e" is not related to the mathematical constant e (a confusion not possible when using capital "E") ; and though it is short for exponent, the notation is referred to as (scientific) E notation or (scientific) e notation rather than (scientific) exponential notation though the latter also occurs. The E notation is a variant representation that strictly meets the mathematical requirements of the normalized notation. Examples:
  • In the FORTRAN programming language 6.0221415E23 is equivalent to 6.0221415 × 1023.
  • The ALGOL[1][2] programming language also uses the E notation, alternatively - when available - either character '₁₀' or '\' can be used, for example: 6.0221415₁₀23 and 6.0221415\23.

Engineering notation

Engineering notation differs from the normalized exponential notation by restricting the exponent b to multiples of 3. Consequently, the absolute value of a can need to be equal or larger than 10 (ranging from 1 to limit 1,000) and thus engineering notation does not meet the conditions set for the normalized form, and is rarely called scientific notation. Numbers in this form are easily read out using magnitude prefixes like mega- (b=6), kilo- (b=3), milli- (b=-3), micro- (b=-6) or nano- (b=-9). For example, 12.5 × 10−9 m can be read as "twelve point five nanometers" or written as 12.5 nm.

Usage of spaces

In scientific normalized exponential notation, in E notation, and in engineering notation, the space (which in typesetting may be represented with a normal width space or a thin space) that is allowed only before and after "×" or in front of "E" or "e", may as well be omitted though it is less common to disappear from before the alphabetical character.[3]

Motivation

Scientific notation is a very convenient way to write large or small numbers and do calculations with them. It also quickly conveys two properties of a measurement that are useful to scientists—significant figures and order of magnitude.

Examples

  • An electron's mass is about 0.000 000 000 000 000 000 000 000 000 000 910 938 26 kg. In scientific notation, this is written 9.1093826×10−31 kg.
  • The Earth's mass is about 5,973,600,000,000,000,000,000,000 kg. In scientific notation, this is written 5.9736×1024 kg.
  • The Earth's circumference is approximately 40,000,000 m (i.e. 4 followed by 7 zeroes). In scientific notation, this is written 4×107 m. In engineering notation, this is written 40×106 m. In SI writing style, this may be written "40 Mm" ("40 megameters").

Significant figures

It is a common mistake to confuse scientific notation with the idea of significant figures. In fact, scientific notation does not require using significant figures, nor vice versa.

For example, using scientific notation, in SI units the speed of light is 2.99792458×108 m/s and the inch is 2.54×10-2 m. It would be a mistake to assume that either of these expressions indicated any uncertainty; in fact both numbers are exact.<ref name="cuu-c" >NIST value for the speed of light

It is possible to use scientific notation in conjunction with significant figures, but this is not mandatory and should never be assumed. It is always better to state the uncertainty explicitly. For instance, the accepted value of the unit of elementary charge can properly be expressed as 1.602176487(40)×10-19 coulomb,<ref name="cuu-e" >NIST value for the elementary charge where the (40) indicates 40 counts of uncertainty in the last decimal place. If a number has been rounded off, it can be written in the form 2.5(½)×10-2 to explicitly indicate that there is a half-count of uncertainty in the last digit.

Order of magnitude

Scientific notation also enables simple order of magnitude comparisons. A proton's mass is 0.000 000 000 000 000 000 000 000 001 672 6 kg. If this is written as 1.6726×10−27 kg, it is easier to compare this mass with that of the electron, given above. The order of magnitude of the ratio of the masses can be obtained by simply comparing the exponents rather than counting all the leading zeros. In this case, '−27' is larger than '−31' and therefore the proton is four orders of magnitude (about 10,000 times) more massive than the electron.

Scientific notation also avoids misunderstandings due to regional differences in certain quantifiers, such as 'billion', which might indicate either 109 or 1012.

Using scientific notation

Converting

Multiplication and division by 10 are easy to perform in decimal scientific notation.

At the mantissa, multiplication by 10 may be seen as shifting the decimal separator one position to the right (adding a zero if needed): 12.34×10=123.4. Division may be seen as shifting it to the left: 12.34/10=1.234

In the exponential part multiplication by 10 results in adding 1 to the exponent: 102×10=103. Division by 10 results in subtracting 1 from the exponent: 102/10=101.

Also notice that 1 is multiplication's neutral element and that 100=1.

To convert between different representations of the same number, all that is needed is to perform the opposite operations to each part. Thus multiplying the mantissa by 10, n times is done by shifting the decimal separator n times to the right. Dividing by 10 the same number of times is done by adding −n to the exponent. Some examples:



Basic operations

Given two numbers in scientific notation,





Multiplication and division are performed using the rules for operation with exponential functions:





some examples are:




Addition and subtraction require the numbers to be represented using the same exponential part, in order to simply add, or subtract, the mantissas, so it may take two steps to perform. First, if needed, convert one number to a representation with the same exponential part as the other. This is usually done with the one with the smaller exponent. Second, add or subtract the mantissas.





an example:

References

1. ^ GOST] 10859: 10 to the power of encoding]. Retrieved on Jun 5, 2007.
2. ^ ALCOR] "lower 10"]. Retrieved on Jun 5, 2007.
3. ^ Samples of usage of terminology and variants: [https://darchive.mblwhoilibrary.org/bitstream/1912/665/1/WHOI-76-59.pdf], [1], [2], [3], [4], [5]

External links

Exponentiation is a mathematical operation, written an, involving two numbers, the base a and the exponent n.
..... Click the link for more information.
The integers (from the Latin integer, which means with untouched integrity, whole, entire) are the set of numbers including the whole numbers (0, 1, 2, 3, …) and their negatives (0, −1, −2, −3, …).
..... Click the link for more information.
coefficient is a constant multiplicative factor of a certain object. For example, the coefficient in 9x2 is 9.

The object can be such things as a variable, a vector, a function, etc.
..... Click the link for more information.
In mathematics, the real numbers may be described informally as numbers that can be given by an infinite decimal representation, such as 2.4871773339…. The real numbers include both rational numbers, such as 42 and −23/129, and irrational numbers, such as π and
..... Click the link for more information.
The significand (also coefficient or mantissa) is the part of a floating-point number that contains its significant digits. Depending on the interpretation of the exponent, the significand may be considered to be an integer or a fraction.
..... Click the link for more information.
Mantissa can mean:
  • (According to the Oxford English Dictionary) "an addition of comparatively small importance, esp. to a text or discourse; a supplement"
  • The fractional part (i.e. the part after the separator) of a common logarithm.

..... Click the link for more information.
logarithm (to base b) of a number x is the exponent y that satisfies x = by. It is written logb(x) or, if the base is implicit, as log(x).
..... Click the link for more information.
In mathematics, the absolute value (or modulus[1]) of a real number is its numerical value without regard to its sign. So, for example, 3 is the absolute value of both 3 and −3.
..... Click the link for more information.
Zero may refer to:

Mathematics

  • 0 (number) is a number and a placeholder symbol in positional notation.
  • Zero of a function
  • Division by zero
  • List of zero terms

..... Click the link for more information.
An order of magnitude is the class of scale or magnitude of any amount, where each class contains values of a fixed ratio to the class preceding it. The ratio most commonly used is 10.
..... Click the link for more information.
Engineering notation is scientific notation in which the power of ten must be a multiple of three (i.e, they are powers of a thousand, but written as e.g. 106 instead of 1,0002).
..... Click the link for more information.
Exponentiation is a mathematical operation, written an, involving two numbers, the base a and the exponent n.
..... Click the link for more information.
base refers to the number b in an expression of the form bn. The number n is called the exponent and the expression is known formally as exponentiation of b by n or the exponential of n with base
..... Click the link for more information.
A calculator is a hand-held device for performing calculations. Although modern calculators often incorporate a general purpose computer, the device is designed for performing specific operations, rather than for flexibility.
..... Click the link for more information.
A computer program is one or more instructions that are intended for execution by a computer. Specifically, it is a symbol or combination of symbols forming an algorithm that may or may not terminate, and that algorithm is written in a programming language.
..... Click the link for more information.
subscript or superscript is a number, figure, symbol, or indicator that appears smaller than the normal line of type and is set slightly below or above it – subscripts appear below the baseline, while superscripts are above.
..... Click the link for more information.
The Avogadro constant (symbols: L, NA), also called the Avogadro number is the number of "entities" (usually, atoms or molecules) in one mole,[1][2] that is the number of carbon-12 atoms in 12 grams (0.
..... Click the link for more information.
e is the unique real number such that the value of the derivative (slope of the tangent line) of f(x) = ex at the point x = 0 is exactly 1.
..... Click the link for more information.
Fortran

Paradigm: multi-paradigm: procedural, imperative, structured, object-oriented
Appeared in: 1957
Designed by: John W. Backus
Developer: John W.
..... Click the link for more information.
Algol (β Per / Beta Persei) is a bright star in the constellation Perseus. It is one of the best known eclipsing binaries, the first such star to be discovered, and also one of the first (non-nova) variable stars to be discovered.
..... Click the link for more information.
Engineering notation is scientific notation in which the power of ten must be a multiple of three (i.e, they are powers of a thousand, but written as e.g. 106 instead of 1,0002).
..... Click the link for more information.
The word multiple can refer to:
  • multiples of numbers
  • dissociative identity disorder, for people with multiple personalities, sometimes called "multiples".
  • multiple birth, because having twins is sometimes called having "multiples".

..... Click the link for more information.
1000 (one thousand) is the natural number following 999 and preceding 1001. The letter A does not appear in the English spelling of any number lower than "one thousand".
..... Click the link for more information.
An SI prefix (also known as a metric prefix) is a name or associated symbol that precedes a unit of measure (or its symbol) to form a decimal multiple or submultiple.
..... Click the link for more information.
MEGA or Mega may refer to:

In science:
  • mega-, the SI prefix for one million
  • "megalo-" means "large", coming from a Greek word with that exact meaning.

..... Click the link for more information.
kilo- is a metric prefix.

Kilo may also refer to:
  • Kilo, Espoo, a district of Espoo, Finland
  • KILO, a Colorado radio station
  • Kilo class submarine, the NATO reporting name for a type of Russian submarine

..... Click the link for more information.
Milli redirects here. See Millie for similar-sounding words
Milli- (symbol m) is a prefix in the SI and other systems of units denoting a factor of 10−3, or 1/1,000.
..... Click the link for more information.
Micro is an English prefix of Greek origin that refers to an object as being smaller than an object or scale of focus, in contrast with macro.
  • micro- is a prefix in the SI and other systems of units denoting a factor of 10−6 (one millionth).

..... Click the link for more information.
nano- is an SI prefix denoting a factor of 10−9.

Nano may also be:
  • Creative ZEN Nano, a digital audio player
  • Fatos Nano, Prime Minister of Albania
  • iPod nano, a digital audio player

..... Click the link for more information.
In writing, a space ( ) is any empty (non-written) zone between written sections. However, the term is usually used to refer to an empty zone used for interword separation (interword space) or separation between punctuation and words.
..... Click the link for more information.


This article is copied from an article on Wikipedia.org - the free encyclopedia created and edited by online user community. The text was not checked or edited by anyone on our staff. Although the vast majority of the wikipedia encyclopedia articles provide accurate and timely information please do not assume the accuracy of any particular article. This article is distributed under the terms of GNU Free Documentation License.
Herod_Archelaus


page counter