iPedia Free Information Center

Information about Palatine Bone

Bone: Palatine bone
Permanent teeth of upper dental arch, seen from below. (Horizontal part of palatine bone visible at bottom.)
Sagittal section of skull. (Palatine bone is labeled at bottom left.)
subject #41 166
MeSH Palatine+Bone
The palatine bone is a bone in the palate (Latin palatum; unrelated to palatium 'palace', from which other senses of palatine derive).

Anatomy

It is situated at the back part of the nasal cavity between the maxilla and the pterygoid process of the sphenoid.

It contributes to the walls of three cavities: the floor and lateral wall of the nasal cavity, the roof of the mouth, and the floor of the orbit; it enters into the formation of two fossæ, the pterygopalatine and pterygoid fossæ; and one fissure, the inferior orbital fissure.

The palatine bone somewhat resembles the letter L, and consists of a Horizontal plate of palatine bone and a Perpendicular plate of palatine bone and three outstanding processes—viz., the Pyramidal process of palatine bone, which is directed backward and lateralward from the junction of the two parts, and the Orbital process of palatine bone and Sphenoidal process of palatine bone, which surmount the vertical part, and are separated by a deep notch, the sphenopalatine notch.

Articulations

The palatine articulates with six bones: the sphenoid, ethmoid, maxilla, inferior nasal concha, vomer and opposite palatine.

Additional images


The seven bones which articulate to form the orbit.

Articulation of left palatine bone with maxilla.

Base of skull. Inferior surface.

Horizontal section of nasal and orbital cavities.

Medial wall of left orbit.

Roof, floor, and lateral wall of left nasal cavity.


See also

Sources and references

This article was originally based on an entry from a public domain edition of Gray's Anatomy. As such, some of the information contained herein may be outdated. Please edit the article if this is the case, and feel free to remove this notice when it is no longer relevant.
 •  • [ e]
The Bones which form the Orbit
Frontal bone • Zygomatic bone • Maxillary bone • Sphenoid bone • Ethmoid bone • Palatine bone • Lacrimal bone
 •  • [ e]
Bones of head and neck: the face
maxillaBody of maxilla - Maxillary sinus - surfaces of body Anterior (Incisive fossa, Canine fossa, Infraorbital foramen, Anterior nasal spine) - Infratemporal (Alveolar canals, Maxillary tuberosity) - Orbital (Infraorbital groove, Infraorbital canal) - Nasal (Pterygopalatine canal) - processes Zygomatic process - Frontal process (Agger nasi, Anterior lacrimal crest) - Alveolar process - Palatine process (Incisive foramen, Incisive canals, Foramina of Scarpa, Premaxilla, Anterior nasal spine)
lacrimalPosterior lacrimal crest - Lacrimal groove
zygomaticOrbital process, Zygomaticofacial foramen - Zygomaticotemporal foramen - Zygomaticorbital foramina
palatinePterygopalatine fossa - Pterygoid fossa - Horizontal plate (Posterior nasal spine) - Perpendicular plate (Pterygopalatine canal, Sphenopalatine foramen, Pyramidal process)
processes (Orbital - Sphenoidal)
mandiblebody (Symphysis menti, Mental protuberance, Mental foramen, Mylohyoid line) - Ramus (Mandibular foramen, Mylohyoid groove, Mandibular canal, Angle, Coronoid process, Condyloid process, Mandibular notch)
othersnasal bone - inferior nasal conchae (ethmoidal process, maxillary process) - vomer
Medical Subject Headings (MeSH) is a huge controlled vocabulary (or metadata system) for the purpose of indexing journal articles and books in the life sciences. Created and updated by the United States National Library of Medicine (NLM), it is used by the MEDLINE/PubMed
..... Click the link for more information.
Bones are rigid organs that form part of the endoskeleton of vertebrates. They function to move, support, and protect the various organs of the body, produce red and white blood cells and store minerals.
..... Click the link for more information.
Not to be confused with palette or pallet.
The palate (IPA: /ˈpælət/ or /ˈpælɪt/
..... Click the link for more information.
Paladin or paladine is a title given to certain officials and knights of high rank in Ancient Rome, Medieval Europe, the Roman Catholic Church, and in various other instances.
..... Click the link for more information.
The nasal cavity (or nasal fossa) is a large air-filled space above and behind the nose in the middle of the face.

Function

The nasal cavity conditions the air to be received by the areas of the respiratory tract.
..... Click the link for more information.
The maxilla (plural: maxillae) is a fusion of two bones along the palatal fissure that form the upper jaw. This is similar to the mandible, which is also a fusion of two halves at the mental symphysis.
..... Click the link for more information.
The sphenoid bone (from Greek sphenoeides, "wedgelike") is a bone situated at the base of the skull in front of the temporals and basilar part of the occipital bone.

The sphenoid bone somewhat resembles a butterfly or bat with its wings extended.
..... Click the link for more information.
Pterygopalatine is used to refer to structures of the pterygoid processes of the sphenoid and the palatine bone. Specifically, it can refer to:
  • Pterygopalatine fossa
  • Pterygopalatine canal
  • Pterygopalatine ganglion (also known as the Sphenopalatine ganglion)

..... Click the link for more information.
Pterygoid (from the Greek for 'winglike') can refer to:
  • a plate near the Vomer bone
  • a muscle such as Lateral pterygoid muscle or Medial pterygoid muscle
  • a branch of the Mandibular nerve

..... Click the link for more information.
The lateral wall and the floor of the orbit are separated posteriorly by the inferior orbital fissure which transmits the maxillary nerve and its zygomatic branch, the infraorbital vessels, and the ascending branches from the sphenopalatine ganglion.
..... Click the link for more information.
The horizontal part of the palatine bone (horizontal plate) is quadrilateral, and has two surfaces and four borders.

Surfaces

The superior surface, concave from side to side, forms the back part of the floor of the nasal cavity.
..... Click the link for more information.
The vertical part (perpendicular plate) of the palatine bone is thin, of an oblong form, and presents two surfaces and four borders.

Surfaces

The nasal surface
..... Click the link for more information.
The pyramidal process of the palatine bone projects backward and lateralward from the junction of the horizontal and vertical parts, and is received into the angular interval between the lower extremities of the pterygoid plates.
..... Click the link for more information.
The orbital process of the palatine bone is placed on a higher level than the sphenoidal, and is directed upward and lateralward from the front of the vertical part, to which it is connected by a constricted neck. It presents five surfaces, which enclose an air cell.
..... Click the link for more information.
The sphenoidal process of the palatine bone is a thin, compressed plate, much smaller than the orbital, and directed upward and medialward.

It presents three surfaces and two borders.
..... Click the link for more information.
The sphenoid bone (from Greek sphenoeides, "wedgelike") is a bone situated at the base of the skull in front of the temporals and basilar part of the occipital bone.

The sphenoid bone somewhat resembles a butterfly or bat with its wings extended.
..... Click the link for more information.
The ethmoid bone (from Greek ethmos, "sieve") is a bone in the skull that separates the nasal cavity from the brain. As such, it is located at the roof of the nose, between the two orbits. The cubical bone is lightweight due to a spongy construction.
..... Click the link for more information.
The maxilla (plural: maxillae) is a fusion of two bones along the palatal fissure that form the upper jaw. This is similar to the mandible, which is also a fusion of two halves at the mental symphysis.
..... Click the link for more information.
The inferior nasal concha (Inferior Turbinated Bone) is one of the turbinates in the nose. It extends horizontally along the lateral wall of the nasal cavity [Fig. 1] and consists of a lamina of spongy bone, curled upon itself like a scroll.
..... Click the link for more information.
The vomer (from Latin vomer, -ĕris, "ploughshare") is one of the unpaired facial bones of the skull. It is located in the midsagittal line, and touches the sphenoid, the ethmoid, the left and right palatine bones, and the left and right maxillary bones.
..... Click the link for more information.
The hard palate is a thin horizontal bony plate of the skull, located in the roof of the mouth. It spans the arch formed by the upper teeth.

It is formed by the palatine process of the maxilla and horizontal plate of palatine bone.
..... Click the link for more information.
In sciences dealing with the anatomy of animals, precise anatomical terms of location are necessary for a variety of reasons. Non-scientists often wonder why zoological and human anatomists use complex terminology to describe locations on a body, when common terms like "up",
..... Click the link for more information.
Public domain comprises the body of knowledge and innovation (especially creative works such as writing, art, music, and inventions) in relation to which no person or other legal entity can establish or maintain proprietary interests within a particular legal jurisdiction.
..... Click the link for more information.
Henry Gray's Anatomy of the Human Body (or Gray's Anatomy as it has commonly been shortened) is an English-language human anatomy textbook widely regarded as a classic work on the subject.
..... Click the link for more information.
The frontal bone is a bone in the human skull that resembles a cockleshell in form, and consists of two portions:
  • a vertical portion, the squama frontalis, corresponding with the region of the forehead.

..... Click the link for more information.
The zygomatic bone (malar bone) is a paired bone of the human skull. It articulates with the maxilla, the temporal bone, the sphenoid bone and the frontal bone. It forms part of the orbit and is commonly referred to as the cheekbone.
..... Click the link for more information.
The maxilla (plural: maxillae) is a fusion of two bones along the palatal fissure that form the upper jaw. This is similar to the mandible, which is also a fusion of two halves at the mental symphysis.
..... Click the link for more information.
The sphenoid bone (from Greek sphenoeides, "wedgelike") is a bone situated at the base of the skull in front of the temporals and basilar part of the occipital bone.

The sphenoid bone somewhat resembles a butterfly or bat with its wings extended.
..... Click the link for more information.
The ethmoid bone (from Greek ethmos, "sieve") is a bone in the skull that separates the nasal cavity from the brain. As such, it is located at the roof of the nose, between the two orbits. The cubical bone is lightweight due to a spongy construction.
..... Click the link for more information.
The lacrimal bone, the smallest and most fragile bone of the face, is situated at the front part of the medial wall of the orbit. It has two surfaces and four borders.

Surfaces

Lateral or orbital surface


..... Click the link for more information.


This article is copied from an article on Wikipedia.org - the free encyclopedia created and edited by online user community. The text was not checked or edited by anyone on our staff. Although the vast majority of the wikipedia encyclopedia articles provide accurate and timely information please do not assume the accuracy of any particular article. This article is distributed under the terms of GNU Free Documentation License.
Herod_Archelaus


page counter