Information about Fm Broadcasting

FM broadcasting is a broadcast technology invented by Edwin Howard Armstrong that uses frequency modulation (FM) to provide high-fidelity sound over broadcast radio.
Main article: frequency modulation

Broadcast bands

The original FM broadcast band in the United States until 1946 was on 42 to 50 MHz with 0.2 MHz channel spacing. This band was abandoned after World War II and is now allocated to fixed, mobile, and land mobile radio services.

The term "FM band" can upset purists, because it conflates a modulation scheme with a range of frequencies. It is effectively shorthand for 'frequency band in which FM is used for broadcasting'. The exact range of frequencies used varies around the world, but always falls within the VHF part of the radio spectrum. The term "VHF" was previously in common use for "FM" within the EU. ("UKW," which stands for "Ultrakurzwellen" in German, meaning "ultra short wave", is still widely used in Germany.)

Broadcast bands around the world

Throughout the world, the broadcast band is 87.5 to 108.0 MHz, or some portion thereof. In the U.S. it is 87.8 to 108.0 MHz. Japan is the only exception, using the 76 to 90 MHz band with 0.1 MHz channel spacing.

In the former Soviet republics, and some Eastern Bloc nations, an additional older band from 65.9 to 74 MHz is also used. Assigned frequencies are at intervals of 30 kHz. This band, sometimes referred to as the OIRT band, is slowly being phased out in many countries.

The frequency of an FM broadcast station (more strictly its assigned nominal centre frequency) is usually an exact multiple of 100 kHz. In most of the Americas and the Caribbean, only odd multiples are used. In some parts of Europe, Greenland and Africa, only even multiples are used. In Italy, "half-channel" multiples of 50 kHz are used. There are other unusual and obsolete standards in some countries, including 0.001, 0.01, 0.03, 0.074, and 0.3 MHz.

For more information on FM frequency allocations, see FM broadcast band.

Technical characteristics

Pre-emphasis and de-emphasis

Random noise has a 'triangular' spectral distribution in an FM system, with the effect that noise occurs predominantly at the highest frequencies within the baseband. This can be offset, to a limited extent, by boosting the high frequencies before transmission and reducing them by a corresponding amount in the receiver. Reducing the high frequencies in the receiver also reduces the high-frequency noise. These processes of boosting and then reducing certain frequencies are known as pre-emphasis and de-emphasis, respectively.

The amount of pre-emphasis and de-emphasis used is defined by the time constant of a simple RC filter circuit. In most of the world a 50 µs time constant is used. In North America, 75 µs is used. This applies to both mono and stereo transmissions and to baseband audio (not the subcarriers).

The amount of pre-emphasis that can be applied is limited by the fact that many forms of contemporary music contain more high-frequency energy than the musical styles which prevailed at the birth of FM broadcasting. They cannot be pre-emphasized as much because it would cause excessive deviation of the FM carrier. (Systems more modern than FM broadcasting tend to use either programme-dependent variable pre-emphasis, e.g., dbx in the BTSC TV sound system, or none at all.)

The problems with pre-emphasis due to the high frequency energy in modern music can be greatly attenuated using psychoacoustics principles, as Oscar Bonello demonstrates in his March 2007 AES paper. A new device, the IM cancelled high frequency clipper, is able to produce heavy audio clipping at high audio frequencies, with low listener fatigue.[1][2]

FM stereo

In the early 1960s, several systems to add stereo to FM radio were considered by the FCC. Included were systems from 14 proponents including Crosley, Halstead, Zenith Electronics Corporation and General Electric. The individual systems were evaluated for their strengths and weaknesses. The Crosley system was rejected by the FCC because it degraded the signal to noise ratio of the main channel and did not perform well under multipath RF conditions. In addition it did not allow for SCA services because of its wide FM subcarrier bandwidth. The Halstead system was rejected due to lack of high frequency stereo separation and reduction in the main channel signal to noise ratio. The GE and Zenith systems were so close that they were combined and became the standard stereo FM broadcasting method in the USA and most other countries.

It is important that stereo broadcasts should be compatible with mono receivers. For this reason, the left (L) and right (R) channels are algebraically encoded into sum (L+R) and difference (L-R) signals. A mono receiver will use just the L+R signal so the listener will hear both channels in the single loudspeaker. A stereo receiver will add the L+R and L-R signals to recover the Left channel, and subtract the L+R and L-R signals to recover the Right channel.

The (L+R) Main channel signal is transmitted as baseband audio in the range of 30 Hz to 15 kHz. The (L-R) Sub-channel L-R signal is modulated onto a 38 kHz double-sideband suppressed carrier (DSBSC) signal occupying the baseband range of 23 to 53 kHz.

A 19 kHz pilot tone, at exactly half the 38 kHz subcarrier frequency and with a precisely defined phase relationship to it, is also generated. This is transmitted at 8-10% of overall modulation level and used by the receiver to regenerate the 38 kHz subcarrier with the correct phase.

The final multiplex signal from the stereo generator contains the Main Channel (L+R), the pilot tone, and the sub-channel (L-R). This composite signal, along with any other subcarriers (SCA), modulates the FM transmitter.

Converting the multiplex signal back into left and right audio signals is performed by a stereo decoder, which is built into stereo receivers.

In order to preserve stereo separation, it is normal practice to apply pre-emphasis to the left and right channels before encoding, and to apply de-emphasis at the receiver after decoding.

Stereo FM signals are more susceptible to noise and multipath distortion than are mono FM signals. This is due to imbalance of FM sideband ratios of the additional modulating signals created by the pilot tone and the sub-carrier channel.

In addition, for a given RF level at the receiver, the signal to noise ratio for the stereo signal will be worse than for the mono receiver. The point at which the receiver input RF level reaches maximum monaural signal to noise ratio will be 23 dB lower then the receiver input RF level for maximum stereo signal to noise ratio. For this reason many FM stereo receivers include a stereo/mono switch to allow listening in mono when reception conditions are less than ideal, and most car radios are arranged to reduce the separation as the S/N ratio worsens, eventually going to mono while still indicating a stereo signal is being received.

Quadraphonic FM

In 1969 Louis Dorren invented the Quadraplex system of single station, discrete, compatible four-channel FM broadcasting. There are actually two additional subcarriers in the Quadraplex system, not just one as commonly believed. The baseband layout is as follows:

50 Hz to 15 kHz Main Channel (Sum of all 4 channels) (LF+LB+RF+RB) signal, for Mono FM listening compatibility.

19 kHz Pilot synchronizing signal

23 to 53 kHz (sine Quadrant Subcarrier) (LF+LB) - (RF+RB) Left minus Right difference signal. This signal's modulation in algebraic sum and difference with the Main channel was used for 2 channel stereo listener compatibility.

23 to 53 kHz (cosine Quadrant Subcarrier) (LF+RF) - (LB+RB) Front minus Back difference signal. This signal's modulation in algebraic sum and difference with the Main channel and all the other subcarriers is used for the Quadraphonic listener.

61 to 91 kHz (sine Quadrant Subcarrier) (LF+RB) - (LB+RF) difference signal. This is the Diagonal difference signal. This signal's modulation in algebraic sum and difference with the main channel and all the other subcarriers is also used for the Quadraphonic listener.

95 kHz SCA subcarrier, phase locked to 19 kHz pilot, for reading services for the blind, background music, etc.

There were several variations on this system submitted by GE, Zenith, RCA, and Denon for testing and consideration during the National Quadraphonic Radio Committee field trials for the FCC. The original Dorren Quadraplex System outperformed all the others and was chosen as the national standard for Quadraphonic FM broadcasting in the United States.

Other subcarrier services

The subcarrier system has been further extended to add other services. Initially these were private analog audio channels which could be used internally or rented out. Radio reading services for the blind are also still common, and there were experiments with quadraphonic sound. If Stereo on a station, everything from 23 kHz on up can be used for other services. The guard band around 19 kHz (±4 kHz) must still be maintained, so as not to trigger stereo decoders on receivers. If there is stereo, there will typically be a guard band between the upper limit of the DSBSC stereo signal (53 kHz) and the lower limit of any other subcarrier.

Digital services are now also available. A 57 kHz subcarrier (phase locked to the third harmonic of the stereo pilot tone) is used to carry a low-bandwidth digital Radio Data System signal, providing extra features such as Alternate Frequency (AF) and Network (NN). This narrowband signal runs at only 1187.5 bits per second, thus is only suitable for text. A few proprietary systems are used for private communications. A variant of RDS is the North American RBDS or "Smart radio" system while in Germany a system called ARI is used for broadcasting traffic announcements to motorists (without disturbing other listeners) RDS is designed to be capable of being used alongside ARI despite using identical subcarrier frequencies.

The United States is the only country attempting to put digital radio onto FM rather than using Eureka 147 like most other countries (including Canada), or ISDB like Japan. This in-band on-channel approach results in highly-compressed audio, and blocks any opportunity for new stations to broadcast. The proprietary iBiquity system, branded as "HD Radio", uses subcarriers and extends out somewhat into the sidebands. The hybrid digital (hence "HD") system can later take the bandwidth used by the current analog stereo system, and eventually go all-digital, though this would shut out every existing analog radio.

In the USA services (other than Stereo, Quad and RDS) using subcarriers are sometimes referred to as SCA (subsidiary communications authorisation) services. Uses for such subcarriers include book/newspaper reading services for blind listeners, Private data transmission services (For example sending stock market information to stockbrokers or stolen credit card number blacklists to stores) Subscription commercial-free background music services for shops, Paging ("beeper") services and providing a program feed for AM transmitters of AM/FM stations. SCA subcarriers are typically 67 kHz and 92 kHz.

Dolby FM

A commercially unsuccessful noise reduction system used with FM radio in some countries during the late 1970s, Dolby FM used a modified 25 µs pre-emphasis time constant and a frequency selective companding arrangement to reduce noise. See: Dolby noise reduction system.

Adoption of FM broadcasting worldwide

Despite having been developed in the 1940s, FM broadcasting took a long time to be adopted by the majority of radio listeners.

The first FM broadcasting stations were in the United States, but initially they were primarily used to broadcast classical music to an upmarket listenership in urban areas and for educational programming. By the late 1960s FM had been adopted by fans of "alternative rock" music, but it wasn't until 1978 (the first year that listenership to FM stations exceeded that of AM stations) that FM became mainstream. During the 1980s and 1990s, Top 40 music stations and later even country music stations largely abandoned AM for FM. Today AM is mainly the preserve of talk radio, religious programming, ethnic (minority language) broadcasting and some types of minority interest music. Ironically, this shift has transformed AM into the "alternative band" that FM once was.

Belgium, the Netherlands, Denmark and particularly West Germany were among the first countries to adopt FM on a widespread scale. Among the reasons for this were:
  1. The medium wave band in Western Europe is heavily overcrowded, leading to severe interference problems and, as a result, most MW frequencies are suitable only for speech broadcasting.
  2. Particularly in Germany after World War II, the best available medium wave frequencies were used by the Allied occupation forces both for broadcasting entertainment to their troops and for broadcasting cold war propaganda across the Iron curtain
  3. The regional structure of German broadcasting meant that the few remaining AM frequencies available for civilian domestic broadcasting fell far short of the number required and the broadcasters looked to FM as an alternative.


Public service broadcasters in Ireland and Australia were far slower at adopting FM radio than those in either North America or continental Europe. However, in Ireland several unlicenced commercial FM stations were on air by the mid-1980s. These generally simulcast on AM and FM.

In the United Kingdom, the BBC began FM broadcasting in 1955, with three national networks carrying the Light Programme, Third Programme and Home Service (renamed Radio 2, Radio 3 and Radio 4 respectively in 1967). These three networks used the sub-band 88.0 - 94.6 MHz. The sub-band 94.6 to 97.6 MHz was later used for BBC and local commercial services. Only when commercial broadcasting was introduced to the UK in 1973 did the use of FM pick up in Britain. With the gradual clearance of other users (notably Public Services such as police, fire and ambulance) and the extension of the FM band to 108.0 MHz between 1980 and 1995, FM expanded rapidly throughout the British Isles and effectively took over from LW and MW as the delivery platform of choice for fixed and portable domestic and vehicle-based receivers.

In addition, Ofcom (previously the Radio Authority) in the UK issues on demand Restrictive Service Licences on FM and also on AM (MW) for short-term local-coverage broadcasting which is open to anyone who does not carry a prohibition and can put up the appropriate licensing and royalty fees. In 2006 almost 500 such licenses were issued.

FM started in Australia in 1947 but did not catch on and was shut down in 1961 to expand the television band. It was not reopened until 1975. Subsequently, it developed steadily until in the 1980s many AM stations transferred to FM because of its superior sound quality. Today, as elsewhere in the developed world, most Australian broadcasting is on FM - although AM talk stations are still very popular.

Most other countries expanded their use of FM through the 1990s. Because it takes a large number of FM transmitting stations to cover a geographically large country, particularly where there are terrain difficulties, FM is more suited to local broadcasting than national networks. In such countries, particularly where there are economic or infrastructural problems, "rolling out" a national FM broadcast network to reach the majority of the population can be a slow and expensive process.

ITU Conferences about FM

The frequencies available for FM were decided by some important conferences of ITU. The milestone of those conferences is the Stockholm agreement of 1961 among 38 countries.
  • Final acts of the conference
[1]

Small-scale use of the FM broadcast band

Enlarge picture
Belkin ''TuneCast II FM microtransmitter

Consumer use of FM transmitters

In some countries, small-scale (Part 15 in United States terms) transmitters are available that can transmit a signal from an audio device (usually an MP3 player or similar) to a standard FM radio receiver; such devices range from small units built to carry audio to a car radio with no audio-in capability (often formerly provided by special adapters for audio cassette decks, which are becoming less and less common on car radio designs) up to full-sized, near-professional-grade broadcasting systems that can be used to transmit audio throughout a property. Most such units transmit in full stereo, though some models designed for beginner hobbyists may not. Similar transmitters are often included in satellite radio receivers and some toys.

Legality of these devices varies by country. The FCC in the US and Industry Canada allow them. Starting on 1 Oct 2006 these devices became legal in most countries in the European Union. Devices made to the harmonised European specification became legal in the UK on 8 Dec 2006.[3]

FM radio microphones

The FM broadcast band can also be used by some inexpensive wireless microphones, but professional-grade wireless microphones generally use bands in the UHF region so they can run on dedicated equipment without broadcast interference. Such inexpensive wireless microphones are generally sold as toys for karaoke or similar purposes, allowing the user to use an FM radio as an output rather than a dedicated amplifier and speaker.

Microbroadcasting

Low-power transmitters such as those mentioned above are also sometimes used for neighborhood or campus radio stations, though campus radio stations are often run over carrier current. This is generally considered a form of microbroadcasting. As a general rule, enforcement towards low-power FM stations is stricter than AM stations due to issues such as the capture effect, and as a result, FM microbroadcasters generally do not reach as far as their AM competitors.

Clandestine use of FM transmitters

FM transmitters have been used to construct miniature wireless microphones for espionage and surveillance purposes (covert listening devices or so-called "bugs"); the advantage to using the FM broadcast band for such operations is that the receiving equipment would not be considered particularly suspect. Common practice is to tune the bug's transmitter off the ends of the broadcast band, into what in the United States would be TV channel 6 (<87.9 MHz) or aviation navigation frequencies (>107.9); most FM radios with analog tuners have sufficient overcoverage to pick up these beyond-outermost frequencies, although many digitally-tuned radios do not.

Constructing a "bug" is a common early project for electronics hobbyists, and project kits to do so are available from a wide variety of sources. The devices constructed, however, are often too large and poorly shielded for use in clandestine activity.

In addition, much pirate radio activity is broadcast in the FM range, due to the band's greater clarity and listenership.

Notes

1. ^ Oscar Bonello, Multiband audio processing and its influence on the coverage area of FM stereo transmission, AES Journal, New York, March 2007
2. ^ A previous version of this paper is available at [2]
3. ^ [3] Change to the law to allow the use of low power FM transmitters for MP3 players (retrieved from Ofcom web site Dec 7, 2006)

See also

FM broadcasting by country FM broadcasting (technical) Lists History

External links

Related technical content
Broadcasting is the distribution of audio and/or video signals which transmit programs to an audience. The audience may be the general public or a relatively large sub-audience, such as children or young adults.
..... Click the link for more information.
Editing of this page by unregistered or newly registered users is currently disabled due to vandalism.
If you are prevented from editing this page, and you wish to make a change, please discuss changes on the talk page, request unprotection, log in, or .
..... Click the link for more information.
Edwin Howard Armstrong (December 18, 1890 – January 31, 1954) was an American electrical engineer and inventor. Armstrong was the inventor of the FM radio.

Birth and education

Edwin Howard Armstrong was born in Chelsea, New York, in 1890.
..... Click the link for more information.
frequency modulation (FM) conveys information over a carrier wave by varying its frequency (contrast this with amplitude modulation, in which the amplitude of the carrier is varied while its frequency remains constant).
..... Click the link for more information.
  • High fidelity, or hi-fi, is a term which generally refers to high audio quality.
High Fidelity may also refer to:
  • High Fidelity (magazine), a U.S.

..... Click the link for more information.
Radio is the wireless transmission of signals, by modulation of electromagnetic waves with frequencies below those of visible light. Electromagnetic radiation travels by means of oscillating electromagnetic fields that pass through the air and the vacuum of space.
..... Click the link for more information.
frequency modulation (FM) conveys information over a carrier wave by varying its frequency (contrast this with amplitude modulation, in which the amplitude of the carrier is varied while its frequency remains constant).
..... Click the link for more information.
Motto
"In God We Trust"   (since 1956)
"E Pluribus Unum"   ("From Many, One"; Latin, traditional)
Anthem
..... Click the link for more information.
19th century - 20th century - 21st century
1910s  1920s  1930s  - 1940s -  1950s  1960s  1970s
1943 1944 1945 - 1946 - 1947 1948 1949

Year 1646 (MCMXLVI
..... Click the link for more information.
Allied powers:
 Soviet Union
 United States
 United Kingdom
 China
 France
...et al. Axis powers:
 Germany
 Japan
 Italy
...et al.
..... Click the link for more information.
Very high frequency (VHF) is the radio frequency range from 30 MHz to 300 MHz. It is also known as the meter band or meter wave as the wavelengths range from ten to one meters.
..... Click the link for more information.
Editing of this page by unregistered or newly registered users is currently disabled due to vandalism.
If you are prevented from editing this page, and you wish to make a change, please discuss changes on the talk page, request unprotection, log in, or .
..... Click the link for more information.
Headquarters
(and largest city)
Working language Russian
Type Commonwealth
Membership 11 member states
1 associate member
Leaders
 -  Executive Secretary Sergei Lebedev
Establishment December 21 1991
Website
..... Click the link for more information.
Eastern Bloc (or Soviet Bloc) was used to refer to the Soviet Union and its allies in Central and Eastern Europe (Bulgaria, Czechoslovakia, East Germany, Hungary, Poland, Romania, and—until the early 1960s—Albania).
..... Click the link for more information.
Americas are the lands of the Western hemisphere or New World consisting of the continents of North America[1] and South America with their associated islands and regions. The Americas cover 8.3% of the Earth's total surface area (28.
..... Click the link for more information.
Caribbean (Dutch: Cariben or Caraïben, or more commonly Antillen; French: Caraïbe or more commonly Antilles; Spanish: Caribe
..... Click the link for more information.
Europe is one of the seven traditional continents of the Earth. Physically and geologically, Europe is the westernmost peninsula of Eurasia, west of Asia. Europe is bounded to the north by the Arctic Ocean, to the west by the Atlantic Ocean, to the south by the Mediterranean Sea,
..... Click the link for more information.
Anthem
Nunarput utoqqarsuanngoravit
Nuna asiilasooq


Capital
(and largest city) Nuuk (Godthåb)

..... Click the link for more information.
Africa is the world's second-largest and second most-populous continent, after Asia. At about 30,221,532 km² (11,668,545 sq mi) including adjacent islands, it covers 6% of the Earth's total surface area, and 20.4% of the total land area.
..... Click the link for more information.
Anthem
Il Canto degli Italiani
(also known as Fratelli d'Italia)


..... Click the link for more information.
In most of the world, the FM broadcast band, used for broadcasting FM radio stations, goes from 87.5 to 108.0 MHz. In Japan the FM broadcast band is 76–90 MHz, unlike any other country in the world. The old OIRT band in Eastern Europe was 65.8–74 MHz.
..... Click the link for more information.
NOiSE is a one volume manga created by Tsutomu Nihei as a prequel to his acclaimed ten-volume work, Blame!.

It offers some rather sketchy information concerning the Megastructure's origins and initial size, as well as the origins of Silicon life.
..... Click the link for more information.
frequency spectrum of the light. When all the visible frequencies are present in equal amounts, the effect is the "color" white, and the spectrum is a flat line. Therefore, flat-line spectrums in general are often referred to as white
..... Click the link for more information.
FreQuency is a music video game developed by Harmonix and published by SCEI. It was released in November 2001. A sequel, titled Amplitude was released in 2003.
..... Click the link for more information.
Baseband is an adjective that describes signals and systems whose range of frequencies is measured from 0 to a maximum bandwidth or highest signal frequency; it is sometimes used as a noun for a band of frequencies starting at 0.
..... Click the link for more information.
In telecommunications, transmission is the forwarding of signal traffic over distances that are too great to be simply connected by a twisted pair wires. Techniques available now may be microwave link, satellite link, coaxial cable or fibre optic cable.
..... Click the link for more information.
In physics and engineering, the time constant usually denoted by the Greek letter , (tau), characterizes the frequency response of a first-order, linear time-invariant (LTI) system. Examples include electrical RC circuits and RL circuits.
..... Click the link for more information.
A resistor-capacitor circuit (RC circuit), or RC filter or RC network, is an electric circuit composed of resistors and capacitors driven by a voltage or current source.
..... Click the link for more information.
Monaural (often shortened to mono) sound reproduction is single-channel. Typically there is only one microphone, one loudspeaker, or, in the case of headphones or multiple loudspeakers, they are fed from a common signal path, and in the case of multiple microphones, mixed
..... Click the link for more information.
Stereophonic sound, commonly called stereo, is the reproduction of sound, using two or more independent audio channels, through a symmetrical configuration of loudspeakers, in such a way as to create a pleasant and natural impression of sound heard from various directions,
..... Click the link for more information.


This article is copied from an article on Wikipedia.org - the free encyclopedia created and edited by online user community. The text was not checked or edited by anyone on our staff. Although the vast majority of the wikipedia encyclopedia articles provide accurate and timely information please do not assume the accuracy of any particular article. This article is distributed under the terms of GNU Free Documentation License.
Herod_Archelaus


page counter