Information about Binding Energy
Binding energy is the mechanical energy required to disassemble a whole into separate parts. A bound system has a lower potential energy than its constituent parts; this is what keeps the system together. The usual convention is that this corresponds to a positive binding energy.
In general, binding energy represents the mechanical work which must be done in acting against the forces which hold an object together, while disassembling the object into component parts separated by sufficient distance that further separation requires negligible additional work.
Electron binding energy is a measure of the energy required to free electrons from their atomic orbits.
Nuclear binding energy is derived from the strong nuclear force and is the energy required to disassemble a nucleus into free unbound neutrons and protons, strictly so that the relative distances of the particles from each other are infinite (essentially far enough so that the strong nuclear force can no longer cause the particles to interact). At the atomic level, the binding energy of the atom is derived from electromagnetic interaction and is the energy required to disassemble an atom into free electrons and a nucleus.
In astrophysics, gravitational binding energy of a celestial body is the energy required to disassemble it into space debris (dust and gas). This quantity is not to be confused with the gravitational potential energy, which is the energy required to separate two bodies, such as a celestial body and a satellite, to infinite distance, keeping each intact (the latter energy is lower).
Since all forms of energy in a system (which has no net momentum) have mass, the question of where the missing mass of the binding energy goes is of interest. The answer is that this mass does not "disappear" into energy (a common misconception); rather, transformed to heat or light, this mass may move away to another location. The "mass defect" from binding energy is therefore only mass which has moved. However, it remains mass, because mass is conserved in systems for any given single observer, so long as the system remains closed. Thus, if binding energy mass is transformed into heat, the system must be cooled (the heat removed) before the mass-deficit appears in the cooled system. In that case, the removed heat (which has mass itself when measured in the original inertial frame) represents exactly the mass "deficit".
For example, when two large objects (such as the earth and a meteor) are attracted by a gravitational field and collide, the energy for the heat of impact is extracted from the gravitational field of the objects. However, the system does not lose mass (which represents its binding energy) until this heat is radiated into space, and this space is no longer counted as part of the original system (equivalent to opening the original system).
Closely analogous considerations apply in chemical and nuclear considerations. However, in nuclear reactions, the fraction of mass which may be removed as light or heat, and which then appears as binding energy, is often a much larger fraction of the system mass. This is because nuclear forces are comparatively stronger than other forces.
In nuclear reactions, the "light" which must be radiated to remove binding energy may be in the form of direct gamma radiation. Again, however, no mass-deficit can in theory appear until this radiation has been emitted and is no longer part of the system.
The energy given off during either nuclear fusion or nuclear fission is the difference between the binding energies of the fuel and the fusion or fission products. In practice, this energy may also be calculated from the substantial mass differences between the fuel and products, once evolved heat and radiation have been removed.
where
The mass of the deuteron (also an experimentally measured quantity) is
The mass difference = 2.01649−2.014102 u = 0.002388 u. Since the conversion between rest mass and energy is 931.494MeV/u, a deuteron's binding energy is calculated to be
Thus, expressed in another way, the binding energy is [0.002388/2.01649] x 100% = about 0.1184% of the total energy corresponding to the mass. This corresponds to 1.07 x
J/kg = 107 TJ/kg.
In the periodic table of elements, the series of light elements from hydrogen up to sodium is observed to exhibit generally increasing binding energy per nucleon as the atomic mass increases. This increase is generated by increasing forces per nucleon in the nucleus, as each additional nucleon is attracted by all of the other nucleons, and thus more tightly bound to the whole.
The region of increasing binding energy is followed by a region of relative stability (saturation) in the sequence from magnesium through xenon. In this region, the nucleus has become large enough that nuclear forces no longer completely extend efficiently across its width. Attractive nuclear forces in this region, as atomic mass increases, are nearly balanced by repellent electromagnetic forces between protons, as atomic number increases.
Finally, in elements heavier than xenon, there is a decrease in binding energy per nucleon as atomic number increases. In this region of nuclear size, electromagnetic repulsive forces are beginning to gain against the strong nuclear force.
At the peak of binding energy, nickel-62 is the most tightly-bound nucleus, followed by iron-58 and iron-56.[1] (This is the basic reason why iron and nickel are very common metals in planetary cores, since they are produced profusely as end products in supernovae).
The existence of a maximum in binding energy in medium-sized nuclei is a consequence of the trade-off in the effects of two opposing forces which have different range characteristics. The attractive nuclear force (strong nuclear force), which binds protons and neutrons equally to each other, has a limited range due to a rapid exponential decrease in this force with distance. However, the repelling electromagnetic force, which acts between protons to force nuclei apart, falls off with distance much more slowly (as the inverse square of distance). For nuclei larger than about four nucleons in diameter, the additional repelling force of additional protons more than offsets any binding energy which results between further added nucleons as a result of additional strong force interactions; such nuclei become less and less tightly bound as their size increases, though most of them are still stable. Finally, nuclei containing more than 209 nucleons (larger than about 6 nucleons in diameter) are all too large to be stable, and are subject to spontaneous decay to smaller nuclei.
Nuclear fusion produces energy by combining the very lightest elements into more tightly-bound elements (such as hydrogen into helium), and nuclear fission produces energy by splitting the heaviest elements (such as uranium and plutonium) into more tightly-bound elements (such as barium and krypton). Both processes produce energy, because middle-sized nuclei are the most tightly bound of all.
where the binding energy is in MeV for the following numerical values of the constants:
; 
; 
; 
; 
.
Most terms in this formula can be explained by the liquid drop model for the nucleus, which treats the nucleus as a drop of uniform, incompressible fluid, whose radius can be derived from its density.
The first term
is called the saturation contribution and ensures that the B.E. per nucleon is the same for all nuclei to a first approximation.
The term
is a surface tension effect and is proportional to the number of nucleons that are situated on the nuclear surface. It is largest for light nuclei.
The term
is the Coulomb electrostatic repulsion. This becomes more important as 
increases.
The symmetry correction term
takes into account Pauli's exclusion principle. In the absence of other effects the most stable arrangement (i.e. one with lowest energy) has equal numbers of protons and neutrons.
The pairing term
is + for even-even nuclei and − for odd-odd nuclei. This too is a result of Pauli's exclusion principle, together with the protons and neutrons having spin 1/2.
The following table gives the binding energy per nucleon in MeV for selected isotopes.
Nuclear binding energy can be easily computed from the easily measurable difference in mass of a nucleus, and the sum of the masses of the number of free neutrons and protons that make up the nucleus. Once this mass difference, called the mass defect or mass deficiency, is known, Einstein's mass-energy equivalence formula E = mc² can be used to compute the binding energy of any nucleus. (As a historical note, early nuclear physicists used to refer to computing this value as a "packing fraction" calculation.)
For example, the atomic mass unit (1.000000 u) is defined to be 1/12 of the mass of a 12C atom—but the atomic mass of a 1H atom (which is a proton plus electron) is 1.007825 u, so each nucleon in 12C has lost, on average, about 0.8% percent of its mass in the form of binding energy.
..... Click the link for more information.
In general, binding energy represents the mechanical work which must be done in acting against the forces which hold an object together, while disassembling the object into component parts separated by sufficient distance that further separation requires negligible additional work.
Electron binding energy is a measure of the energy required to free electrons from their atomic orbits.
Nuclear binding energy is derived from the strong nuclear force and is the energy required to disassemble a nucleus into free unbound neutrons and protons, strictly so that the relative distances of the particles from each other are infinite (essentially far enough so that the strong nuclear force can no longer cause the particles to interact). At the atomic level, the binding energy of the atom is derived from electromagnetic interaction and is the energy required to disassemble an atom into free electrons and a nucleus.
In astrophysics, gravitational binding energy of a celestial body is the energy required to disassemble it into space debris (dust and gas). This quantity is not to be confused with the gravitational potential energy, which is the energy required to separate two bodies, such as a celestial body and a satellite, to infinite distance, keeping each intact (the latter energy is lower).
Mass defect
Because a bound system is at a lower energy level than its unbound constituents, its mass must be less than the total mass of its unbound constituents. For systems with low binding energies, this "lost" mass after binding, may be fractionally small. For systems with high binding energies, however, the missing mass may be an easily measurable fraction.Since all forms of energy in a system (which has no net momentum) have mass, the question of where the missing mass of the binding energy goes is of interest. The answer is that this mass does not "disappear" into energy (a common misconception); rather, transformed to heat or light, this mass may move away to another location. The "mass defect" from binding energy is therefore only mass which has moved. However, it remains mass, because mass is conserved in systems for any given single observer, so long as the system remains closed. Thus, if binding energy mass is transformed into heat, the system must be cooled (the heat removed) before the mass-deficit appears in the cooled system. In that case, the removed heat (which has mass itself when measured in the original inertial frame) represents exactly the mass "deficit".
For example, when two large objects (such as the earth and a meteor) are attracted by a gravitational field and collide, the energy for the heat of impact is extracted from the gravitational field of the objects. However, the system does not lose mass (which represents its binding energy) until this heat is radiated into space, and this space is no longer counted as part of the original system (equivalent to opening the original system).
Closely analogous considerations apply in chemical and nuclear considerations. However, in nuclear reactions, the fraction of mass which may be removed as light or heat, and which then appears as binding energy, is often a much larger fraction of the system mass. This is because nuclear forces are comparatively stronger than other forces.
In nuclear reactions, the "light" which must be radiated to remove binding energy may be in the form of direct gamma radiation. Again, however, no mass-deficit can in theory appear until this radiation has been emitted and is no longer part of the system.
The energy given off during either nuclear fusion or nuclear fission is the difference between the binding energies of the fuel and the fusion or fission products. In practice, this energy may also be calculated from the substantial mass differences between the fuel and products, once evolved heat and radiation have been removed.
Atomic binding energy
The binding energy for a single atom is given by
where
- c is the speed of light;
- ms is the mass of the separated nucleons;
- mb is the mass of the bound nucleus;
- Z is the atomic number of the bound nucleus;
- mp is the mass of one proton;
- N is the number of neutrons;
- mn is the mass of one neutron.
Specific quantitative example: a deuteron
A deuteron is the nucleus of a deuterium atom, and consists of one proton and one neutron. The experimentally-measured masses of the constituents as free particles are- mproton = 1.007825 u;
- mneutron= 1.008665 u;
- mproton + mneutron = 1.007825 + 1.008665 = 2.01649 u.
The mass of the deuteron (also an experimentally measured quantity) is
- Atomic mass 2H = 2.014102 u.
The mass difference = 2.01649−2.014102 u = 0.002388 u. Since the conversion between rest mass and energy is 931.494MeV/u, a deuteron's binding energy is calculated to be
- 0.002388 u × 931.494 MeV/u = 2.224 MeV.
Thus, expressed in another way, the binding energy is [0.002388/2.01649] x 100% = about 0.1184% of the total energy corresponding to the mass. This corresponds to 1.07 x
J/kg = 107 TJ/kg.
Nuclear binding energy curve
)
Binding energy per nucleon of common isotopes (cf. large version of figure below).
The region of increasing binding energy is followed by a region of relative stability (saturation) in the sequence from magnesium through xenon. In this region, the nucleus has become large enough that nuclear forces no longer completely extend efficiently across its width. Attractive nuclear forces in this region, as atomic mass increases, are nearly balanced by repellent electromagnetic forces between protons, as atomic number increases.
Finally, in elements heavier than xenon, there is a decrease in binding energy per nucleon as atomic number increases. In this region of nuclear size, electromagnetic repulsive forces are beginning to gain against the strong nuclear force.
At the peak of binding energy, nickel-62 is the most tightly-bound nucleus, followed by iron-58 and iron-56.[1] (This is the basic reason why iron and nickel are very common metals in planetary cores, since they are produced profusely as end products in supernovae).
The existence of a maximum in binding energy in medium-sized nuclei is a consequence of the trade-off in the effects of two opposing forces which have different range characteristics. The attractive nuclear force (strong nuclear force), which binds protons and neutrons equally to each other, has a limited range due to a rapid exponential decrease in this force with distance. However, the repelling electromagnetic force, which acts between protons to force nuclei apart, falls off with distance much more slowly (as the inverse square of distance). For nuclei larger than about four nucleons in diameter, the additional repelling force of additional protons more than offsets any binding energy which results between further added nucleons as a result of additional strong force interactions; such nuclei become less and less tightly bound as their size increases, though most of them are still stable. Finally, nuclei containing more than 209 nucleons (larger than about 6 nucleons in diameter) are all too large to be stable, and are subject to spontaneous decay to smaller nuclei.
Nuclear fusion produces energy by combining the very lightest elements into more tightly-bound elements (such as hydrogen into helium), and nuclear fission produces energy by splitting the heaviest elements (such as uranium and plutonium) into more tightly-bound elements (such as barium and krypton). Both processes produce energy, because middle-sized nuclei are the most tightly bound of all.
Semiempirical formula
For a nucleus with A nucleons including Z protons, a semiempirical formula for the binding energy per nucleon iswhere the binding energy is in MeV for the following numerical values of the constants:
; ; ; ; .
Most terms in this formula can be explained by the liquid drop model for the nucleus, which treats the nucleus as a drop of uniform, incompressible fluid, whose radius can be derived from its density.
The first term
is called the saturation contribution and ensures that the B.E. per nucleon is the same for all nuclei to a first approximation.
The term
is a surface tension effect and is proportional to the number of nucleons that are situated on the nuclear surface. It is largest for light nuclei.
The term
is the Coulomb electrostatic repulsion. This becomes more important as increases.
The symmetry correction term
takes into account Pauli's exclusion principle. In the absence of other effects the most stable arrangement (i.e. one with lowest energy) has equal numbers of protons and neutrons.
The pairing term
is + for even-even nuclei and − for odd-odd nuclei. This too is a result of Pauli's exclusion principle, together with the protons and neutrons having spin 1/2.
The following table gives the binding energy per nucleon in MeV for selected isotopes.
| Formula | Measured | |
| Al27 | 8.42 | 8.33 |
| Cu63 | 8.75 | 8.75 |
| Mo98 | 8.62 | 8.63 |
| Pt195 | 7.87 | 7.92 |
| U238 | 7.56 | 7.58 |
Measuring the binding energy
As seen above in the example of deuterium, nuclear binding energies are large enough that they may be easily measured as fractional mass deficits, according to the equivalence of mass and energy. The atomic binding energy is simply the amount of energy (and mass) released, when a collection of free nucleons are joined together to form a nucleus. All nuclei which last long enough to be weighed, are measurably lighter than a corresponding collection of free protons and neutrons.Nuclear binding energy can be easily computed from the easily measurable difference in mass of a nucleus, and the sum of the masses of the number of free neutrons and protons that make up the nucleus. Once this mass difference, called the mass defect or mass deficiency, is known, Einstein's mass-energy equivalence formula E = mc² can be used to compute the binding energy of any nucleus. (As a historical note, early nuclear physicists used to refer to computing this value as a "packing fraction" calculation.)
For example, the atomic mass unit (1.000000 u) is defined to be 1/12 of the mass of a 12C atom—but the atomic mass of a 1H atom (which is a proton plus electron) is 1.007825 u, so each nucleon in 12C has lost, on average, about 0.8% percent of its mass in the form of binding energy.
References
1. ^ Fewell, M. P. (1995). "The atomic nuclide with the highest mean binding energy". American Journal of Physics 63 (7): 653-658.
External links
See also
- Electron binding energy
- Chemical bond
- Bond energy
- Nuclear fission
- Nuclear fusion
- Nuclear reaction
- Strong nuclear force
- William Prout
In physics, mechanical energy describes the potential energy and kinetic energy present in the components of a mechanical system.
..... Click the link for more information.
Related concepts
When a given sum of mechanical energy is transferred (such as when throwing a ball, lifting a box, crushing a can, or..... Click the link for more information.
Potential energy can be thought of as energy stored within a physical system. This energy can be released or converted into other forms of energy, including kinetic energy.
..... Click the link for more information.
..... Click the link for more information.
In physics, mechanical work is the amount of energy transferred by a force. Like energy, it is a scalar quantity, with SI units of joules. Heat conduction is not considered to be a form of work, since there is no macroscopically measurable force, only microscopic forces occurring
..... Click the link for more information.
..... Click the link for more information.
Electron binding energy (BE) is the energy required to release an electron from its atomic or molecular orbital. Binding energy values are normally reported as positive values with units of "eV".
..... Click the link for more information.
..... Click the link for more information.
The strong interaction or strong force is today understood to represent the interactions between quarks and gluons as detailed by the theory of quantum chromodynamics (QCD).
..... Click the link for more information.
..... Click the link for more information.
energy (from the Greek ενεργός, energos, "active, working")[1] is a scalar physical quantity that is a property of objects and systems of objects which is conserved by nature.
..... Click the link for more information.
..... Click the link for more information.
The nucleus of an atom is the very small dense region of an atom, in its center consisting of nucleons (protons and neutrons). The size (diameter) of the nucleus is in the range of 1.
..... Click the link for more information.
..... Click the link for more information.
Neutron
The quark structure of the neutron.
Composition: one up, two down
Family: Fermion
Group: Quark
Interaction: Gravity, Electromagnetic, Weak, Strong
Antiparticle: Antineutron
Discovered: James Chadwick[1]
Symbol: n
Mass: 1.
..... Click the link for more information.
The quark structure of the neutron.
Composition: one up, two down
Family: Fermion
Group: Quark
Interaction: Gravity, Electromagnetic, Weak, Strong
Antiparticle: Antineutron
Discovered: James Chadwick[1]
Symbol: n
Mass: 1.
..... Click the link for more information.
Proton
The quark structure of the proton.
Composition: 2 up, 1 down
Family: Fermion
Group: Quark
Interaction: Gravity, Electromagnetic, Weak, Strong
Antiparticle: Antiproton
Discovered: Ernest Rutherford (1919)
Symbol: p+
Mass: 1.
..... Click the link for more information.
The quark structure of the proton.
Composition: 2 up, 1 down
Family: Fermion
Group: Quark
Interaction: Gravity, Electromagnetic, Weak, Strong
Antiparticle: Antiproton
Discovered: Ernest Rutherford (1919)
Symbol: p+
Mass: 1.
..... Click the link for more information.
Quantum chemistry is a branch of theoretical chemistry, which applies quantum mechanics and quantum field theory to address issues and problems in chemistry. The description of the electronic behavior of atoms and molecules as pertaining to their reactivity is one of the
..... Click the link for more information.
..... Click the link for more information.
Electromagnetism is the physics of the electromagnetic field: a field which exerts a force on particles that possess the property of electric charge, and is in turn affected by the presence and motion of those particles.
..... Click the link for more information.
..... Click the link for more information.
The ionization potential, ionization energy or EI of an atom or molecule is the energy required to remove one mole of electrons from one mole of isolated gaseous atoms or ions.
..... Click the link for more information.
..... Click the link for more information.
Astronomy is the scientific study of celestial objects (such as stars, planets, comets, and galaxies) and phenomena that originate outside the Earth's atmosphere (such as the cosmic background radiation).
..... Click the link for more information.
..... Click the link for more information.
The gravitational binding energy of an object consisting of loose material, held together by gravity alone, is the amount of energy required to pull all of the material apart, to infinity.
..... Click the link for more information.
..... Click the link for more information.
momentum (pl. momenta; SI unit kg m/s, or, equivalently, N•s) is the product of the mass and velocity of an object. For more accurate measures of momentum, see the section "modern definitions of momentum" on this page.
..... Click the link for more information.
..... Click the link for more information.
A gravitational field is a model used within physics to explain how gravity exists in the universe. In its original concept, gravity was a force between point masses. Following Newton, Laplace attempted to model gravity as some kind of radiation field or fluid, and since the 19th
..... Click the link for more information.
..... Click the link for more information.
Radiation as used in physics, is energy in the form of waves or moving subatomic particles. Radiation can be classified as ionizing or non-ionizing radiation, depending on its effect on atomic matter.
..... Click the link for more information.
..... Click the link for more information.
For the music band, see .
Gamma rays or gamma-ray (denoted as γ) are forms of electromagnetic radiation (EMR) or light emissions of a specific frequency produced from sub-atomic particle interaction, such as electron-positron annihilation and..... Click the link for more information.
nuclear fusion is the process by which multiple atomic particles join together to form a heavier nucleus. It is accompanied by the release or absorption of energy. Iron and nickel nuclei have the largest binding energies per nucleon of all nuclei and therefore are the most stable.
..... Click the link for more information.
..... Click the link for more information.
Nuclear fission is the splitting of the nucleus of an atom into parts (lighter nuclei) often producing photons (in the form of gamma rays), free neutrons and other subatomic particles as by-products.
..... Click the link for more information.
..... Click the link for more information.
speed of light in a vacuum is an important physical constant denoted by the letter c for constant or the Latin word celeritas meaning "swiftness".[1] It is the speed of all electromagnetic radiation, including visible light, in a vacuum.
..... Click the link for more information.
..... Click the link for more information.
nucleon is a collective name for two baryons: the neutron and the proton. They are constituents of the atomic nucleus and until the 1960s were thought to be elementary particles. In those days their interactions (now called internucleon interactions) defined strong interactions.
..... Click the link for more information.
..... Click the link for more information.
The nucleus of an atom is the very small dense region of an atom, in its center consisting of nucleons (protons and neutrons). The size (diameter) of the nucleus is in the range of 1.
..... Click the link for more information.
..... Click the link for more information.
Proton
The quark structure of the proton.
Composition: 2 up, 1 down
Family: Fermion
Group: Quark
Interaction: Gravity, Electromagnetic, Weak, Strong
Antiparticle: Antiproton
Discovered: Ernest Rutherford (1919)
Symbol: p+
Mass: 1.
..... Click the link for more information.
The quark structure of the proton.
Composition: 2 up, 1 down
Family: Fermion
Group: Quark
Interaction: Gravity, Electromagnetic, Weak, Strong
Antiparticle: Antiproton
Discovered: Ernest Rutherford (1919)
Symbol: p+
Mass: 1.
..... Click the link for more information.
Neutron
The quark structure of the neutron.
Composition: one up, two down
Family: Fermion
Group: Quark
Interaction: Gravity, Electromagnetic, Weak, Strong
Antiparticle: Antineutron
Discovered: James Chadwick[1]
Symbol: n
Mass: 1.
..... Click the link for more information.
The quark structure of the neutron.
Composition: one up, two down
Family: Fermion
Group: Quark
Interaction: Gravity, Electromagnetic, Weak, Strong
Antiparticle: Antineutron
Discovered: James Chadwick[1]
Symbol: n
Mass: 1.
..... Click the link for more information.
Deuterium, also called heavy hydrogen, is a stable isotope of hydrogen with a natural abundance in the oceans of Earth of approximately one atom in 6500 of hydrogen (~154 PPM). Deuterium thus accounts for approximately 0.015% (on a weight basis, 0.
..... Click the link for more information.
..... Click the link for more information.
Proton
The quark structure of the proton.
Composition: 2 up, 1 down
Family: Fermion
Group: Quark
Interaction: Gravity, Electromagnetic, Weak, Strong
Antiparticle: Antiproton
Discovered: Ernest Rutherford (1919)
Symbol: p+
Mass: 1.
..... Click the link for more information.
The quark structure of the proton.
Composition: 2 up, 1 down
Family: Fermion
Group: Quark
Interaction: Gravity, Electromagnetic, Weak, Strong
Antiparticle: Antiproton
Discovered: Ernest Rutherford (1919)
Symbol: p+
Mass: 1.
..... Click the link for more information.
Neutron
The quark structure of the neutron.
Composition: one up, two down
Family: Fermion
Group: Quark
Interaction: Gravity, Electromagnetic, Weak, Strong
Antiparticle: Antineutron
Discovered: James Chadwick[1]
Symbol: n
Mass: 1.
..... Click the link for more information.
The quark structure of the neutron.
Composition: one up, two down
Family: Fermion
Group: Quark
Interaction: Gravity, Electromagnetic, Weak, Strong
Antiparticle: Antineutron
Discovered: James Chadwick[1]
Symbol: n
Mass: 1.
..... Click the link for more information.
The unified atomic mass unit (u), or dalton (Da), is a small unit of mass used to express atomic and molecular masses. It is defined to be one twelfth of the mass of an unbound atom of the carbon-12 nuclide, at rest and in its ground state.
..... Click the link for more information.
..... Click the link for more information.
Energy density is the amount of energy stored in a given system or region of space per unit volume, or per unit mass, depending on the context. In some cases it is obvious from context which quantity is most useful: for example, in rocketry, energy per unit mass is the most
..... Click the link for more information.
..... Click the link for more information.
This article is copied from an article on Wikipedia.org - the free encyclopedia created and edited by online user community. The text was not checked or edited by anyone on our staff. Although the vast majority of the wikipedia encyclopedia articles provide accurate and timely information please do not assume the accuracy of any particular article. This article is distributed under the terms of GNU Free Documentation License.
Herod_Archelaus
